Not selling I got this for 150 was it a good deal
{MODERATED FOR CLARITY...
FROM THE AUCTION:}
is a USED Provari v2.5 and accessories. This is pretty much and then some, except ejuice, everything you need to start vaping. I have had this for a little over a year. I quit smoking 2 packs a day with this thing. As with all hobbies or things I take an interest in, I got a little carried away with my purchases of vape gear. I'm a sucker for shiny, pretty electronics. I still have one other of these that I'm keeping because I still vape, but not nearly as much as I used to when I quit smoking, so I'm trimming down my collection. I am the only owner of this vaporizer and bought it directly from the manufacturer Provape. I have owned some other Variable Voltage mods as well as a slew of mechanical mods. This thing is truly the best. Some consider it the Rolls Royce of vaporizers and I would have to agree. It's built in the United States with US parts. It is built like a tank! My other Provari fell from a loft in my home onto a hardwood floor and it didn't phase it one bit. Every hit you take from this is consistent, which has not been my experience with mechanical mods or other VV vaporizers due to voltage drop. I'm not just saying these things because I'm selling it, this is truly the best out there in my experience. What's for sale here, is pretty much everything you need to get puffing away except the liquid. I will describe everything included thoroughly, there is a issue with the aftermarket air ring finisher, PLEASE READ THE FOLLOWING:
1. One USED Provape Provari Variable Voltage version 2.5. Polished Stainless Steel. This was used regularly and often, shows some slight surface scratches but looks great because of the finish and materials it is constructed with. This was never taken out of my home, I only vaped with this inside. Works the same as it did when I purchased it new.
2. One USED wood step style Vaporizer stand. This is also made in the US and sold only by Provape. It was also purchased directly from them. Pretty much looks new.
3. One USED Tatroe Base end cap. Purchased directly from Cigtechs who machine these. Heavy stainless steel high quality machining also made in the US by the folks at Cigtechs in Illinois. This is used as you can see in the pictures to set the Provari on it's end anywhere without being as likely to tip it over. It has been very handy and very glad I purchased it. Threads tighten smoothly.
4. One USED Tatroe extension ring. Machined very nicely and also sold and made by Cigtechs as mentioned above. This is so you can put a 18650 Battery in it and also use the Tatroe base end cap. Threads tighten smoothly.
5. One USED small vent air cap. This is just a cheapie I purchased from ebay. This is used for some atomizers that do not have vent channels or holes, the Provari does not have any vent channels so you won't be able to get a draw from the vaporizer of this type. This trinket remedies that.
6. One USED Atmistique Top end cap finisher and vent cap. PLEASE READ. This is the piece that is only half functioning. It does work, but you have to tinker with it. There is a small adjustable brass pin screw that sits inside it to make contact between the atomizer and the Provari. You can see it in the pictures. This little brass piece is worn, it does not easily adjust to make contact. Usually if I remove a atomizer from it, I have to push that pin out through the bottom and twist the end to its maximum before I put another atomizer on it. If you take the atomizer off then put it back on, I rarely get contact without having to do what I mentioned. It's a nice looking piece, as it gives the Provari a squared off look, and keeps smooth lines when using the larger atomizers. It also claims to allow air in with atomizers without air channels/holes. I didn't find it did that very well, not as well as the other cheapie one I mentioned above. It is in two parts, and the other bonus is that the threaded part puts a piece in between the Provari and the atomizer. Some atomizers from China, which is most of them, are not always machined very well. So this way you don't risk cross threading your Provari 510 connector. Maybe you have access to machining equipment or good with tinkering that you can fix this problem. This was purchased from Mountain Oak Vapors and is made in Greece I believe.
7. One USED Provari extension cap. This is the end cap to allow you to use a 18650 battery. It is rounded off on the bottom. It is made and purchased from Provape.
8. One USED Tenergy TN270 Battery charger. Basic charger that will charge 18650, 18350, 18490/18500 batteries. This was purchased from Provape when I purchased the Provari. I'm sure it is probably made in China. It does have two lights that let you know when the batteries are charged. Nothing too special, it's a charger.
9. 2 USED AW IMR 18650 Li-on Batteries. THESE ARE USED. These have been working for me as they should. They are used, so I have no idea how much longer they will last. They could literally not work very well after you received this item. In placing your bids, I wouldn't even consider these in your auction price, but I just thought it would be nice to throw these in the package.
10. One USED plastic extension spacer ring. Some of the longer duration batteries are a wee bit longer and the Provari extension cap will not sit flush with the Provari, this is just a spacer so you don't over tighten the end cap.
11. Two USED authentic Innokin iClear 30s Atomizers. Decent atomizers I used for a bit. I now just use rebuidable coil ones. They both have 2 used coil cartos in them. I only used the current cartos inside maybe 2 to 3 puffs. They may have residual flavor in them because the juice sat in them for a couple of months. I did clean them with a sonic cleaner and soaked them in Isopropyl alcohol for several days, but can't guarantee they still don't have residual flavor. These do have air channels so it is not necessary to use the air adapter rings mentioned above.
12. Two NEW Smok brand cartos still sealed. These are just simple atomizers that you drip a couple of ejuice into to vape. Nothing special but work well.
13. Two USED plastic drip tips with chrome tops. Just threw these in so you could use the Smok cartos.
14. One USED carrying case. I got this with the first cheapie mod I bought, but the Provari will fit into it securely. It's plastic hard case with zipper. 2 mesh pockets inside as well as elastic band to secure your mod.
15. Two USED atomizer base stands. Simple little aluminum bases to rest your atomizers upright when not being used. These are not threaded, the 510 end just sits inside the hole. I found them to be really handy.
{MODERATED FOR CLARITY...
FROM THE AUCTION:}
is a USED Provari v2.5 and accessories. This is pretty much and then some, except ejuice, everything you need to start vaping. I have had this for a little over a year. I quit smoking 2 packs a day with this thing. As with all hobbies or things I take an interest in, I got a little carried away with my purchases of vape gear. I'm a sucker for shiny, pretty electronics. I still have one other of these that I'm keeping because I still vape, but not nearly as much as I used to when I quit smoking, so I'm trimming down my collection. I am the only owner of this vaporizer and bought it directly from the manufacturer Provape. I have owned some other Variable Voltage mods as well as a slew of mechanical mods. This thing is truly the best. Some consider it the Rolls Royce of vaporizers and I would have to agree. It's built in the United States with US parts. It is built like a tank! My other Provari fell from a loft in my home onto a hardwood floor and it didn't phase it one bit. Every hit you take from this is consistent, which has not been my experience with mechanical mods or other VV vaporizers due to voltage drop. I'm not just saying these things because I'm selling it, this is truly the best out there in my experience. What's for sale here, is pretty much everything you need to get puffing away except the liquid. I will describe everything included thoroughly, there is a issue with the aftermarket air ring finisher, PLEASE READ THE FOLLOWING:
1. One USED Provape Provari Variable Voltage version 2.5. Polished Stainless Steel. This was used regularly and often, shows some slight surface scratches but looks great because of the finish and materials it is constructed with. This was never taken out of my home, I only vaped with this inside. Works the same as it did when I purchased it new.
2. One USED wood step style Vaporizer stand. This is also made in the US and sold only by Provape. It was also purchased directly from them. Pretty much looks new.
3. One USED Tatroe Base end cap. Purchased directly from Cigtechs who machine these. Heavy stainless steel high quality machining also made in the US by the folks at Cigtechs in Illinois. This is used as you can see in the pictures to set the Provari on it's end anywhere without being as likely to tip it over. It has been very handy and very glad I purchased it. Threads tighten smoothly.
4. One USED Tatroe extension ring. Machined very nicely and also sold and made by Cigtechs as mentioned above. This is so you can put a 18650 Battery in it and also use the Tatroe base end cap. Threads tighten smoothly.
5. One USED small vent air cap. This is just a cheapie I purchased from ebay. This is used for some atomizers that do not have vent channels or holes, the Provari does not have any vent channels so you won't be able to get a draw from the vaporizer of this type. This trinket remedies that.
6. One USED Atmistique Top end cap finisher and vent cap. PLEASE READ. This is the piece that is only half functioning. It does work, but you have to tinker with it. There is a small adjustable brass pin screw that sits inside it to make contact between the atomizer and the Provari. You can see it in the pictures. This little brass piece is worn, it does not easily adjust to make contact. Usually if I remove a atomizer from it, I have to push that pin out through the bottom and twist the end to its maximum before I put another atomizer on it. If you take the atomizer off then put it back on, I rarely get contact without having to do what I mentioned. It's a nice looking piece, as it gives the Provari a squared off look, and keeps smooth lines when using the larger atomizers. It also claims to allow air in with atomizers without air channels/holes. I didn't find it did that very well, not as well as the other cheapie one I mentioned above. It is in two parts, and the other bonus is that the threaded part puts a piece in between the Provari and the atomizer. Some atomizers from China, which is most of them, are not always machined very well. So this way you don't risk cross threading your Provari 510 connector. Maybe you have access to machining equipment or good with tinkering that you can fix this problem. This was purchased from Mountain Oak Vapors and is made in Greece I believe.
7. One USED Provari extension cap. This is the end cap to allow you to use a 18650 battery. It is rounded off on the bottom. It is made and purchased from Provape.
8. One USED Tenergy TN270 Battery charger. Basic charger that will charge 18650, 18350, 18490/18500 batteries. This was purchased from Provape when I purchased the Provari. I'm sure it is probably made in China. It does have two lights that let you know when the batteries are charged. Nothing too special, it's a charger.
9. 2 USED AW IMR 18650 Li-on Batteries. THESE ARE USED. These have been working for me as they should. They are used, so I have no idea how much longer they will last. They could literally not work very well after you received this item. In placing your bids, I wouldn't even consider these in your auction price, but I just thought it would be nice to throw these in the package.
10. One USED plastic extension spacer ring. Some of the longer duration batteries are a wee bit longer and the Provari extension cap will not sit flush with the Provari, this is just a spacer so you don't over tighten the end cap.
11. Two USED authentic Innokin iClear 30s Atomizers. Decent atomizers I used for a bit. I now just use rebuidable coil ones. They both have 2 used coil cartos in them. I only used the current cartos inside maybe 2 to 3 puffs. They may have residual flavor in them because the juice sat in them for a couple of months. I did clean them with a sonic cleaner and soaked them in Isopropyl alcohol for several days, but can't guarantee they still don't have residual flavor. These do have air channels so it is not necessary to use the air adapter rings mentioned above.
12. Two NEW Smok brand cartos still sealed. These are just simple atomizers that you drip a couple of ejuice into to vape. Nothing special but work well.
13. Two USED plastic drip tips with chrome tops. Just threw these in so you could use the Smok cartos.
14. One USED carrying case. I got this with the first cheapie mod I bought, but the Provari will fit into it securely. It's plastic hard case with zipper. 2 mesh pockets inside as well as elastic band to secure your mod.
15. Two USED atomizer base stands. Simple little aluminum bases to rest your atomizers upright when not being used. These are not threaded, the 510 end just sits inside the hole. I found them to be really handy.
Last edited by a moderator:
