The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Got my first mech mod and im not getting as big of clouds as i think i should be

Discussion in 'Ask The Veterans' started by Rkdann, Dec 28, 2016.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Rkdann

    Rkdann Full Member

    Aug 9, 2015
    London Ontario Canada
    Ive been vaping for a while now, my everyday mod is my wismec r200s with a 528 customs clone which i can chuck huge clouds with.
    I recently bought my first unregulated mech box, its a tug boat and im using the matching rda with it. I curently have dual micro coils in 8 wrap of 24g nichrom that sit at about .2 ohms and i have fully chared vct5s in it.
    Its producing good vapor, its just not procing the awsome clouds that i can get with my regulated or like ive seen people blow with mechs before i dont know what the problem is.
     
  2. Topwater Elvis

    Topwater Elvis Vaping Master ECF Veteran

    Dec 26, 2012
    Texas
    Depending on which 'tug boat' you have, it is most likley parallel configuration.
    So,
    4.2v / .2Ω = 88w, not including any v drop.

    Including v drop and as the batteries discharge;
    4v /.2Ω = 80w
    3.7v / .2Ω = 68w
    3.5v / .2Ω = 61w
    3.2v / .2Ω = 51w

    The difference is the regulated provides consistent power to the coil(s), set it to 80w the coil(s) receive 80w, mash the button on a mech and see above.
     
    • Like Like x 2
  3. sonicbomb

    sonicbomb Vaping Master Verified Member ECF Veteran

    Feb 17, 2015
    1187 Hunterwasser
    If something doesn't do what you are expecting it to, it's either the wrong thing or you're using it incorrectly.
    If you could provide some more info about the mod (dual/single battery, parallel/series), and what power levels you are trying to match with the rx200 we can provide some advice.
     
    • Like Like x 1
Thread Status:
Not open for further replies.

Share This Page