So my family bought be the best Christmas present, an awesome chance to stop Smoking stinky poison sticks.
They gifted me a decent set up for a noob,
Eleaf 100w and Heracles RTA.
I was hoping for the 100w TC and Heracles 2 but I'm pleased with this set up now that I've managed to learn how not to let the tank flood and leak lol.
I do have a question.
It came with batteries but they are 3.7v /3000mah with no name. There are stickers on each of the brown batteries but only says 18650. 3.7V. 30000MAH.
I've been learning a lot the past couple weeks but wondering not sure if my batteries are ok/safe.
I'm running dual coil 22g kantha 7 or 8 wrap and right now it reads .24ohm resistance (sometimes, .31??)
I keep it around 30-40w which I like except the ramp up time.. When I set it to higher wattage I find the steam is too hot for my preferance.
At 57.1w it hits 3.7v. but that fluctuates... Now that I'm.checking it's 52.7w =3.7v
Also my mod makes a buzzing noise when it fires below 50ish watts.. I've read that it is caused by the circuit board dealing with the regulation... And that it's not uncommon but I've only found a couple of postings here or there so not sure how true that is or if I should take it back to the store.
Anything over the 50 or so watts and there is no buzzing noise.
Accidently I noticed I can run it over 3.7 volts and it seems to work OK. Quite hot but still goes.
Any info or suggestions would be welcome,
I'm happy to say I've had like 3 ciggies since Christmas and looking forward to being smoke free for 2017!!
Viva la Vapalution!
They gifted me a decent set up for a noob,
Eleaf 100w and Heracles RTA.
I was hoping for the 100w TC and Heracles 2 but I'm pleased with this set up now that I've managed to learn how not to let the tank flood and leak lol.
I do have a question.
It came with batteries but they are 3.7v /3000mah with no name. There are stickers on each of the brown batteries but only says 18650. 3.7V. 30000MAH.
I've been learning a lot the past couple weeks but wondering not sure if my batteries are ok/safe.
I'm running dual coil 22g kantha 7 or 8 wrap and right now it reads .24ohm resistance (sometimes, .31??)
I keep it around 30-40w which I like except the ramp up time.. When I set it to higher wattage I find the steam is too hot for my preferance.
At 57.1w it hits 3.7v. but that fluctuates... Now that I'm.checking it's 52.7w =3.7v
Also my mod makes a buzzing noise when it fires below 50ish watts.. I've read that it is caused by the circuit board dealing with the regulation... And that it's not uncommon but I've only found a couple of postings here or there so not sure how true that is or if I should take it back to the store.
Anything over the 50 or so watts and there is no buzzing noise.
Accidently I noticed I can run it over 3.7 volts and it seems to work OK. Quite hot but still goes.
Any info or suggestions would be welcome,
I'm happy to say I've had like 3 ciggies since Christmas and looking forward to being smoke free for 2017!!
Viva la Vapalution!
Attachments
Last edited: