Hardware advice needed

[Sunflake]

I've gotten a few suggestions but wanted to put it out to the NuThouse as well. What small dripper would you recommend that will work well on a Vision SpinnerII? I'm having a major taste issue and found out this weekend that I taste a lot better on a dripper with a box mod. Im not looking to jump in and pick up that type of setup. I'm just looking for something of good quality just to see if I like messing with a dripper.

thanks to those who have already put in their .

 

[Grrrr]

This could be an option for you, direct dripping, no cotton:

HH.357 Long Barrel Hybrid 510 Atomizer - Avid Vaper

If you want something like a Magma (Magma RDA Paradigm - Vapor Hub) then you'll need something other than a vision spinner2 as it has a low amp limit so you can't build low ohm coils. There are numerous affordable regulated box mods coming out of China right now. The new sigelei 100 Watt Plus might be an option. Vapor Range | Sigelei 100W 100 Watt Plus Variable Wattage Box Mod Your Online Vape Store for Mechanical Mods , Rebuildable Dripper RBA's RDA's , and Juice

Just my

 

[danibanani]

This could be an option for you, direct dripping, no cotton:

HH.357 Long Barrel Hybrid 510 Atomizer - Avid Vaper

If you want something like a Magma (Magma RDA Paradigm - Vapor Hub) then you'll need something other than a vision spinner2 as it has a low amp limit so you can't build low ohm coils. There are numerous affordable regulated box mods coming out of China right now. The new Sigelei 100 Watt Plus might be an option. Vapor Range | Sigelei 100W 100 Watt Plus Variable Wattage Box Mod Your Online Vape Store for Mechanical Mods , Rebuildable Dripper RBA's RDA's , and Juice

Just my

Grrr, I have a still clone I would be happy to donate. Would that work on his/her equipment? I have a silver bullet I used to use it on.

Thanks,
Dani

 

[danibanani]

I've gotten a few suggestions but wanted to put it out to the NuThouse as well. What small dripper would you recommend that will work well on a Vision SpinnerII? I'm having a major taste issue and found out this weekend that I taste a lot better on a dripper with a box mod. Im not looking to jump in and pick up that type of setup. I'm just looking for something of good quality just to see if I like messing with a dripper.

thanks to those who have already put in their .

Sunflake,

Hold off on buying a dripper. I might have one I can give to you. I wrote a post to grrr, who really knows his stuff, hopefully he can chime in.

Take care,
Dani

 

[Megan Kogijiki Ratchford]

It will work you need an ohm reader sunflake and just make a coil higher than 1 ohm, 1.2 would be better, and it will work. I used a nemmy clone for months before I got my Dibi and that was on a eGo twist.

 

[danibanani]

It will work you need an ohm reader sunflake and just make a coil higher than 1 ohm, 1.2 would be better, and it will work. I used a nemmy clone for months before I got my Dibi and that was on a eGo twist.

Thanks, Megan! I'll PM sunflake.

 

[ReigntheGamer]

And Sunflake if you decide to go with a Sigelei shoot me a PM I know where you can grab one cheap.

 

[Ladiekali]

I love my hh.357 on my mini reo. I gave up on rebuilding. Just not for me. So I picked up a variety of 510 and 901 atties, as well as the hh.357

The hh.357 is better all around. But $20
But the others from avid and empire are good too. About $8

Tried many others from different vendors but I threw them in the trash.

Changing flavors is a breeze in all of them.
The hh.357 holds more juice because of the design
There is a video on avid vapors that is very informative.

And you can use them on your spinner

 

[Sunflake]

No problem with a ohm meter. I do HVAC for a living and always carry Fluke meters for measuring voltage,resistance and a bunch of other stuff. I'll get with Dani.

 

[Megan Kogijiki Ratchford]

No problem with a ohm meter. I do HVAC for a living and always carry Fluke meters for measuring voltage,resistance and a bunch of other stuff. I'll get with Dani.

Then you are SET!!!

 

[sketchness]

On the spinner you will want to twist a coil with 32 gauge kanthal. 25 feet is $3 free shipping. lv20 coupon code probably still works as well.

Kanthal A1 Resistance Wire | Lightning Vapes

 

[Sunflake]

When you're measuring the resistance of your coil are you just measuring the resistance of the wire itself after you've twisted it?

 

[sketchness]

You attach it to the rda and then I have a multi meter that I just touch both leads to the connector. You will probably want to shoot for 2 ohms. Dual coil is 14ish wraps and a single is 7ish

Edit - make sure you torch the wire first. 32 is really springy but worse before it has been heated. you can do it on the stove with a pen torch or with 32 probably a bic

Coil wrapping | Steam Engine | free vaping calculators

 

[distortoblotto]

You attach it to the rda and then I have a multi meter that I just touch both leads to the connector. You will probably want to shoot for 2 ohms. Dual coil is 14ish wraps and a single is 7ish

Edit - make sure you torch the wire first. 32 is really springy but worse before it has been heated. you can do it on the stove with a pen torch or with 32 probably a bic

Coil wrapping | Steam Engine | free vaping calculators

You can also relieve the springiness by grabbing both ends of the cut with needle nosed pliers and a tight grip while pulling the wire in the opposite directions just enough to feel it stretch. This straightens the wire as well making it easier to work with during the wrap. Haven't had to torch a bit of wire since starting to do this.

 

[Soignee]

You can also relieve the springiness by grabbing both ends of the cut with needle nosed pliers and a tight grip while pulling the wire in the opposite directions just enough to feel it stretch. This straightens the wire as well making it easier to work with during the wrap. Haven't had to torch a bit of wire since starting to do this.

I'm putting that pro move in my bag of tricks, thanks DB!

 

[Sunflake]

I just wanted to publicly thank Dani for not only sending the RDA to me(should be here Saturday) but she also built the coils and installed a new wick! And sent some extra cotton pads. Here I was looking for some advice and Dani just decided to send one my way! Some of the kindest most generous people I've ever met have been on forums, Dani falls into that catagory! Thank you Dani! Your the best!!!!

 

[Soignee]

I just wanted to publicly thank Dani for not only sending the RDA to me(should be here Saturday) but she also built the coils and installed a new wick! And sent some extra cotton pads. Here I was looking for some advice and Dani just decided to send one my way! Some of the kindest most generous people I've ever met have been on forums, Dani falls into that catagory! Thank you Dani! Your the best!!!!

Sunflake, I'm happy to hear you're on your way to a better topper! Hope your tasting improves now!
Dani that was right nice of you young lady! Way to represent!

 

[danibanani]

I just wanted to publicly thank Dani for not only sending the RDA to me(should be here Saturday) but she also built the coils and installed a new wick! And sent some extra cotton pads. Here I was looking for some advice and Dani just decided to send one my way! Some of the kindest most generous people I've ever met have been on forums, Dani falls into that catagory! Thank you Dani! Your the best!!!!

Thank you for the compliment, sunflake, you didn't need to thank me publically, I could see the excitement in your PM's. So many people have helped me on these forums, I'm just paying it forward. And now it'll be your turn to pay it forward when you are able.

xoxoxo,
Dani