Currently have my eVic for 3 weeks until yesterday when I woke up i saw my eVic's screen saying CHARGING and its not even attached to my USB/Charger. It says charging when in standby/sleep/off I dont know how to fix the problem. Also if my battery goes down to 45% it wont fire anymore which annoyed me a lot yesterday and I started to charge it came to around 50% of battery and it fired. Tried reseting it already but still nothing. Anyone have this problem? Can someone help me with this? Gladly Appreciate it Thanks
Having issues with eVic HELP!
- Thread starter keithrainier
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic
- Status
I have a similar quirk in mine. I use 18350 batteries and sometimes near the end of the battery charge the mod will say charging and even fire the atty by itself requiring me to remove the battery to stop it firing. A fresh battery fixes mine right up. So it may be that the battery is going bad, and the charge remaining meter is no longer calibrated for the lower mAh of the diminished battery.
Right now it says 70% battery in mine and I cant even fire it. Guess im getting a new battery. Sigh just had it for 3 weeks.
Mine only does this at less than 10% battery remaining. So it may not be the battery.
Could be. Have you removed the battery, and re-inserted? Could be a poor connection too. Spring making good contact?
Yes I already removed and re-inserted the battery. Its making good contact. I dont know what to do I just had it for 3 weeks. I just wanna vape. 
Awhile ago it said Charging Complete when i reinserted the battery.
Awhile ago it said Charging Complete when i reinserted the battery.
All that is left is to update the firmware if you haven't already. There is a factory reset I think also.
3 weeks old though. I'd contact the vendor for or JoyeTech for warranty repair if all else fails.
Joyetech download
3 weeks old though. I'd contact the vendor for or JoyeTech for warranty repair if all else fails.
Joyetech download
I already did the reset but still nothing. I already emailed my seller and Joyetech. Just waiting for their reply. Thanks For Your Help. I appreciate it
I also see the temperature bar below the voltage whenever I charge it. 1st time that has happened when it began reading Charging on standy/off/sleep mode. Ill try and go to my Vape Store and see if i can replace my battery.
Make sure you have the latest firmware, and then go in and update the battery setting through custom, and then make sure you are going in and setting the Temp warning for something higher than whatever it is currently set too, I have mine set to 110, you have to do it through the MVR setting for the temp otherwise it is an impossible number to get to for some reason
Contacted my supplier and I am returning my eVic so they would replace me a new one. Got no other choice. Cant Vape around for a week Goodluck to me.
There was also a recall on some control heads that were made during a certain time frame. You can find out by the serial number. Mine for some reason just shuts itself off when it gets around 10%. I can turn it back on still but as soon as i go to fire it it will shut itself off again.
eVic Control Head Recall Notice
check your serial number against the numbers they have posted. to make sure you don't have a bad control head.
And btw, disposables are expensive save 24$ and buy an ego twist to use as a backup while your main is charging. or extra batteries.
Hi I already checked my serial was 21219**** so it's not included in the recall. Didnt knew ego twist was that cheap. Should get one Thanks!
Hey no problem bud, just trying to help a fella out, i have been there at one point in time. If i can suggest a very good supplier it would be vaporalley.com Rick does a great job treating his customers right. Alot of his stuff is out of stock cause of the chinese new year. But he has quality gear. Vape on bro.
- Status
Similar threads
