Having some trouble, voltage question

[Walken]

I upgraded and bought an eleaf Istick 40w and a Cubis tank with a few different coils, I'm using a 1.0 right now that's reading at 1.13. All the charts say I shouldn't take this thing above 3 volts at those ohms but I need to be above that to get a decent draw, 4 is much better. Any ideas?

 

[BillW50]

I upgraded and bought an Eleaf Istick 40w and a Cubis tank with a few different coils, I'm using a 1.0 right now that's reading at 1.13. All the charts say I shouldn't take this thing above 3 volts at those ohms but I need to be above that to get a decent draw, 4 is much better. Any ideas?

What charts? If you ran it to 5v, it would only be 5A at 25 watts.

Ohm's law

 

[Walken]

This one

And this one.

 

[sawlight]

Indeed, what charts? I'm running 11w at 4.9v on one mod and 3.7v at 20w on another.
Please provide a link as the numbers you are listing aren't adding up.

 

[sawlight]

This one

And this one.

Ahhhhhh, those are REALLY old charts, from back when I started out. It's a whole new world now. Most atomizers provide considerably more airflow than the old cartomizers those charts are referring to. People are vaping daily at 50 watts with the new gear out.
Let's restart at where YOU like it and then go from there. I'm not familiar with your atomizer, but start around 11 watts and see how you like it. Then up or down from there to get the flavor and throat hit you like.

 

[BillW50]

This one

And this one.

Those charts are like 4 years old and older. They are meant for those CE4 clearomizers and cartomizers that used thin Kanthal wires 32AWG and thinner.

 

[Walken]

Oh cool. That makes sense. I like it at about 25 watts. I'll play with the link Bill gave me and just assume I won't over juice this thing and make it pop. Thank you Bill. Thank you sawlight.

 

[sawlight]

No problem! Sorry for the confusion, vape on and enjoy!

 

[suprtrkr]

Yeah, ignore the charts. I probably wouldn't go above 20W on a 1 ohm coil, but 25 isn't dangerous, it just might shorten coil life a bit.