Having trouble with my MT3 still
- Thread starter EKat
- Start date
- th_trl_thread_readers 0
- Status
You know what I had a great run with my T3's but Ive been having trouble with getting replacement coils
seems like they are trying to push everything to the MT3 which Ive been resistant since the T3's have been to good
Actually just got new T3 coils that don't even fit So I believe there are a lot of bad clones out there
Also with the T3's you cant let it get below a 3rd full or it will flood
Also thinner juices tend to flood it
but its an easy fix
1)I have a sponge next to me with holes for the the coil and the body I let gravity work (I Have multiple clero's carto tanks Rba )
Also if its not a bad flood you can open it up do a quick pull or 2 on it to clear the tube
Only 1 juice I used was real bad will it but I vape mostly 50/50 mix
And yes if its flooded you would get bad hits but it should hit well when not flooded
seems like they are trying to push everything to the MT3 which Ive been resistant since the T3's have been to good
Actually just got new T3 coils that don't even fit So I believe there are a lot of bad clones out there
Also with the T3's you cant let it get below a 3rd full or it will flood
Also thinner juices tend to flood it
but its an easy fix
1)I have a sponge next to me with holes for the the coil and the body I let gravity work (I Have multiple clero's carto tanks Rba )
Also if its not a bad flood you can open it up do a quick pull or 2 on it to clear the tube
Only 1 juice I used was real bad will it but I vape mostly 50/50 mix
And yes if its flooded you would get bad hits but it should hit well when not flooded
Make sure you arent getting juice into the air passage when filling it. Also warm/hot temps will thin out the juice, which will cause flooding through the wicks.
You can clear the juice from the center tube by blowing it out from the bottom and dabbing up any liquid that comes out or accumulates in the mouth piece. Be sure to clean up around the threading on the battery too. If juice is in there it too will gurgle.
Inspect all o-rings or insulators. If ones out of place or smashed you can run into problems. Especially the insulator ( white rubbery looking things) around the part that makes contact with the battery. Sometimes the insulator will get smashed from over tightening. When its smashed juice will leak.
Hope something i mentioned helps.
You can clear the juice from the center tube by blowing it out from the bottom and dabbing up any liquid that comes out or accumulates in the mouth piece. Be sure to clean up around the threading on the battery too. If juice is in there it too will gurgle.
Inspect all o-rings or insulators. If ones out of place or smashed you can run into problems. Especially the insulator ( white rubbery looking things) around the part that makes contact with the battery. Sometimes the insulator will get smashed from over tightening. When its smashed juice will leak.
Hope something i mentioned helps.
- Status
Similar threads
