Just have a few questions, just getting into this hobby. I'm about to go pick up my 1st kit from the postal office, ordered an Innoking MVP 2.0 with a Protank 2, it also comes with an Iclear30. Was wondering is there anything to do to the unit/tanks before vaping, I'm guessing cleaning them but other than that? Will they leak if not in a vertical position.
- Status
I didn't clean mine when I first got it. It should not leak when not in the vertical position. if it dose there is something wrong.
I found with mine it took a couple days to really break in and then the true flavors start coming out.
Are you a currently smoking analogs?
I found with mine it took a couple days to really break in and then the true flavors start coming out.
Are you a currently smoking analogs?
With those setups no not really, Most people keep there mods in a vertical state but I have not had a problem with mine. Just be careful with your Protank O rings they slip out easy
I do not even clean mine before use... I guess I should, if you do make sure they are dry first
I love my MVP great first buy
I do not even clean mine before use... I guess I should, if you do make sure they are dry first
I love my MVP great first buy
I didn't do any "prep" work on any of my new gear. Charge, Fill, Go! I find they work better after a few days also and that for me coming off of analogs my taste buds and mouth have begun to heal up making literally everything taste better as time goes on
YUK ! be sure to clean it 
pull the coils out of both tanks (set aside)
then get bizzy cleaning the tanks (PTII & i30) a GREAT opportunity to learn how they work too (patience my friend)
then just dry them and put them back together
NOW THE HARD PART "FILL THEM UP--AND WAIT"
you have to WAIT for the wicks to get fully saturated or they will burn and then that's all you will taste
suggest you fill ptII first, then by the time your done messing with all those wicks in the iClear30
maybe the ptII will be ready...
once you screw the base on the tanks, there is a slight vacuum and nothing will leak out
in any position(including upside down)
nice call on MVP & PTII
HAPPY VAPING
pull the coils out of both tanks (set aside)then get bizzy cleaning the tanks (PTII & i30) a GREAT opportunity to learn how they work too (patience my friend)
then just dry them and put them back together
NOW THE HARD PART "FILL THEM UP--AND WAIT"
you have to WAIT for the wicks to get fully saturated or they will burn and then that's all you will taste
suggest you fill ptII first, then by the time your done messing with all those wicks in the iClear30
maybe the ptII will be ready...
once you screw the base on the tanks, there is a slight vacuum and nothing will leak out
in any position(including upside down)
nice call on MVP & PTII
HAPPY VAPING
Cool thanks. Also I noticed when ordering ejuices that they come in different vg/pg proportions, wasnt too sure of what I was doing so I went with the middle ground 50/50, what changes and what do most people use (I know very likely personnal pref), and how much juice do you use in a day?
Welcome to ECF and congrats on the switch!
I now am falling back on the PT2 and have the innokin iclear 16. I cant say much for the iclear 30s. Ive hear some people complaining that if you use both the iclear 30 or the protank 2 right out of the box, the iclears might have a plasticky taste or the PT2 might have a metallic taste to it. Strongly recommend you rinse both tanks with water out before you use them. I got that metallic taste from the PT2 so i followed someones advice on here to give it a rinse as well as using a q tip to run it through the central tube. The flavour was nice afterwards.
Sometimes you might encounter a burnt taste on the PT2. Blowing lightly down on the mouthpiece seemed to have helped. Mind you, if you have the PT2 mini which i had before the big PT2, the burnt taste was encountered much more often. To me, seems like the PT2 mini received more boo's than woo's due to leaking, burnt tastes, flavourlesness. Just to inform those of you the difference between the 2 before you invest.
Otherwise, i dont have any other recommendations for the iclear 30 as ive heard nothing but good things about it except for the aesthetics of it.
I now am falling back on the PT2 and have the innokin iclear 16. I cant say much for the iclear 30s. Ive hear some people complaining that if you use both the iclear 30 or the protank 2 right out of the box, the iclears might have a plasticky taste or the PT2 might have a metallic taste to it. Strongly recommend you rinse both tanks with water out before you use them. I got that metallic taste from the PT2 so i followed someones advice on here to give it a rinse as well as using a q tip to run it through the central tube. The flavour was nice afterwards.
Sometimes you might encounter a burnt taste on the PT2. Blowing lightly down on the mouthpiece seemed to have helped. Mind you, if you have the PT2 mini which i had before the big PT2, the burnt taste was encountered much more often. To me, seems like the PT2 mini received more boo's than woo's due to leaking, burnt tastes, flavourlesness. Just to inform those of you the difference between the 2 before you invest.
Otherwise, i dont have any other recommendations for the iclear 30 as ive heard nothing but good things about it except for the aesthetics of it.
well you'll find out if PG agrees with you
SOME people (ME INCLUDED) can't tolerate PG
it makes me cough & gives me a super bad sore throat, so I use a 20%PG /80%VG ratio
like you said varies even what I tell you I did today is diff next week
SOME people (ME INCLUDED) can't tolerate PG
it makes me cough & gives me a super bad sore throat, so I use a 20%PG /80%VG ratio
like you said varies even what I tell you I did today is diff next week
Congratuations. That's a great setup.
The Innokin iClear clearomizers are wicked from the top. As the juice level falls in the tank, you'll need to occassionally tip your battery device horizontal or swirl the tank around to keep the wicks wet.
I generally use a 50/50 pg/vg ratio for my juices.
The Innokin iClear clearomizers are wicked from the top. As the juice level falls in the tank, you'll need to occassionally tip your battery device horizontal or swirl the tank around to keep the wicks wet.
I generally use a 50/50 pg/vg ratio for my juices.
- Status
Similar threads
