HELP! my mvp 2.0 is not working..

[arianthebarbarian]

So my mvp is not working. Every time I press the button, it stays on for about 3 seconds and shuts off. It's not my tank..which is a kayfun clone. I also have a protank and that also didn't work. Can anyone help a brotha out?

 

[Jeffp305]

What does it read for your resistance? If too low it won't fire

 

[arianthebarbarian]

What does it read for your resistance? If too low it won't fire

It says 0.0 on my mvp but on my ohm reader it reads 1.02-1.03

 

[Jeffp305]

You may not be making connection with your atty, try to pry the center pin in your MVP up a little bit with a small knife or something similar, does this atty fire on other mods?


Sent from my iPhone using Tapatalk

 

[arianthebarbarian]

You may not be making connection with your atty, try to pry the center pin in your MVP up a little bit with a small knife or something similar, does this atty fire on other mods?

No it doesn't work on my ecig twist either. How do I make a connection with the kayfun?

 

[Jeffp305]

You may have a short in the kayfun, the positive block may have twisted and is touching the negative. But first try backing out the pin on the bottom of the kayfun it should be a flathead but only turn it a tiny bit at a time until it makes connection otherwise you may cause the short I previously told you about


Sent from my iPhone using Tapatalk

 

[arianthebarbarian]

You may not be making connection with your atty, try to pry the center pin in your MVP up a little bit with a small knife or something similar, does this atty fire on other mods?


Sent from my iPhone using Tapatalk

You may have a short in the kayfun, the positive block may have twisted and is touching the negative. But first try backing out the pin on the bottom of the kayfun it should be a flathead but only turn it a tiny bit at a time until it makes connection otherwise you may cause the short I previously told you about


Sent from my iPhone using Tapatalk

I think the mvp is the problem. I think it has shorted out on me. Is there any way to fix the mvp?

 

[Jeffp305]

Does nothing else work on the MVP? If so you may be right. If that's the case, I've heard of people taking them apart to fix a loose or disconnected wire, but it not an easy thing to take on. It may be time for a new one try 101vape.com they are 39.99


Sent from my iPhone using Tapatalk

 

[arianthebarbarian]

You may not be making connection with your atty, try to pry the center pin in your MVP up a little bit with a small knife or something similar, does this atty fire on other mods?


Sent from my iPhone using Tapatalk

Does nothing else work on the MVP? If so you may be right. If that's the case, I've heard of people taking them apart to fix a loose or disconnected wire, but it not an easy thing to take on. It may be time for a new one try Driving down the cost of vaping! - 101 Vape they are 39.99


Sent from my iPhone using Tapatalk

That's the thing..I just bought this like 2 weeks ago.

 

[e30holmes]

Mine did that too and I pulled the pin up inside the 510 connection.

Sent from my SCH-I200 using Tapatalk

 

[JoppaRoadCruiser]

Contact the vendor. You have a 3 month warranty. Mine was having voltage/wattage issues and I just sent mine back to be replaced. Waiting for it to arrive this week.

 

[joesquid]

You might have a couple things going on. If your reading 0.0 with the Kayfun it is shorted. Align the positive part of the deck. Must be perfectly straight. What does the MVP read with the PT attached? If it is NON, you pushed the pin down trying to get the Kayfun to work. (Don't ask how I would know this) If that's the case, work the pin up a little with a jeweler screwdriver as was mentioned.