Help Please

Status
Not open for further replies.

Polko

Full Member
Jun 28, 2014
12
2
England
So I've been vaping a week and all us going well. I purchased an MVP v2 and vision spinner 2. 3 tanks a kanger aero, a HyperTank and a kanger mini 3. I have 2 things that are troubling me. When I use the Spinner after say 10 hits the tank gets warm, is this ok? Normal?
And also I love the HyperTank which I was really enjoying for a day or 2 until I got a burnt hit (yuck). I switched to another tank and left it a few days. Just picked it up again and worked great for half an hour but now it's giving burnt hits.
Plenty of juice. Atomiser has had maybe 700 hits?? Any advice on both issues would be appreciated. Oh and I purchased all equipment from a main stream vendor and believe all to be genuine.
 

realsis

Ultra Member
ECF Veteran
Verified Member
Apr 8, 2014
1,802
1,655
California
Yes you might want to adjust your voltage and see if that helps. Also you might check your coil and make sure it's not black or burned out. As for your question about cotton wicking, many people, myself included build their own coils on what is called a rba or rebuildable atomizer. We use cotton as a wicking material and it works wonderfully. Hope this helps answer your questions.
 

PinkPanter

Super Member
Jun 21, 2014
349
183
The Netherlands
Pink Panther it's the actual bottom of the tank that's heating up on the spinner, its fine when I switch it into the mvp. Dragon voltage around 4 on a 2.0 ohm thingy (lol).

To compare it with some other device will always be a difference between it, I'am not sure where you bought your batteries, if it's into a local shop, you can go to them and show the issue if you just not comfy about it, at least it's good you do check heating issues :thumb:
 

Rangertrix

Vaping Master
ECF Veteran
Verified Member
Dec 5, 2013
3,873
15,454
Collinsville, OK
Another thing to remember is that vaping is not like smoking.
When vaping, don't draw as hard as you would with a cigarette, and take slow five or six second draws, then wait about thirty seconds before taking another.
Also, google rewicking and dry burning Kanger coils. This will change your experience with Kanger clearos, and GREATLY increase the life of your coil heads.
Hope this helps.
 
Status
Not open for further replies.

Users who are viewing this thread