Help selecting nemesis mod and info

Status
Not open for further replies.
Ok so I'm looking at getting a nemesis hcigar two tone brass stainless mod.
My questions:
Anyone use this I'd like info on quality and any other recommendations on this mod.

I'm interested in the finish that primarily is brass(brass being the finish where the logo is located) but I'm unsure which option is which
1. Brass on stainless
2. Stainless on brass

I'd also like good tank recommendations that will match. Is the hcigar kayfun tank a good choice? Any other recommendations?

Lastly...what drip setup(atty and tip will work or does anyone recommend?

Any and all jelp will be greatly appreciated



Sent from my iPhone using Tapatalk
 

porkchopbun

Super Member
ECF Veteran
Verified Member
Nov 21, 2013
826
424
Northern CALI, USA
If you don't mind polishing so often, get the brass..it will have lower voltage drop, but not sure if it's noticeable in the hit.
If you like to tinker with switches, and fix things, then look for the magnet upgrade kit for Nemesis and get cranking.

If you want something that works like Nemesis but much improved get the Infinite Stingray clone or another good Stingray clone (comes with a good magnet firing switch already)

Everybody is going gaga over this one for RDA
 
Last edited:

joecil

Super Member
ECF Veteran
Verified Member
Jan 9, 2014
565
203
Russell Springs, Kentucky
Ok here is what I did and for less than the price of the original nemesis. I bought a copper, brass and stainless HCigar nemesis clone with FatDaddyvapes pins and magnet for the switches. I then got the black, red and dark blue aluminum tubes from fast tech for about $9 for each set of 3. Now I can mix and match to suit what ever look, size etc I want. Below is an example of one I used for a few days last week being copper with a black tube and black EHpro Kayfun Lite + clone. However today I'm running a stainless (brushed finished nemesis with black tube and stainless switch and top.

IMG_1643.jpg
 
Status
Not open for further replies.

Users who are viewing this thread