help!!! supert t. can't get it to work

[metapuff]

i'm sure i've got something wrong. charged batteries for 3+ hours

assembled the 501 adapter and atty+tip

the locking mechanism is not locked. the button only presses in a short distance and i'm not sure what the instructions meant by "travel"

help please, anyone

thanks

 

[forcedfuel50]

Being without vape is not good

Travel refers to the distance that you have to push the button in to activate the atomizer. Most prefer a pretty small travel before it activates.

Adjustment is simple, but sometimes when reading the directions, it isn't always clear, so, simply remove the button by lining up the brass post in the side of the button with a groove machined into the side of the unit (you can see the groove if you look down on the base of your button in between one of the u grooves) and sliding it out the top and all is needed is a simple screwdriver. On the top of the button when you remove the spring and insulator, you will see a screw in brass post. If you have a really short throw and want to make it longer, simply remove a washer. If you have a long throw (sometimes you can make it so long, it won't fire) simply add a washer or two as needed.

Hope that helps.

David

 

[metapuff]

thanks for the help. the atty seems to be a very tight fit. it works on a regular 501 battery but not the Super T. my other atty 's work. seems it was Just a bit too thick in the thread. the other atty's thread ok into the Super T. looks like too tight a fit will cause an atty to not work.

 

[Bandit]

Not all 510 attys are created equal. Janty Dura attys fit different than Joye 510s for example.

I have a bunch of different 510 attys, and 3 or 4 of them thread very tightly onto my mods and the rest thread on fine. SO it's not a question of quality on the Super-T, but of the variance in threading on the atomizers themselves.

 

[forcedfuel50]

I thread the 510 atomizers with a tap so they all come out the same size. After i thread them, i actually put a 510 in it several times while i set the center post height that is pressed in, so i was thinking that you probably had a different 510 then the normal (i use 510's from heaven's gift). The only other possibility is that it may have started to cross thread as 510 threads are so fine. Examine the threads closely to verify that first. If not, i'd try a different brand of 510 atomizer. If you feel it got cross threaded, send it to me and i'll take a look at it and if it is, i'll machine you a new one.

David

 

[metapuff]

i'll check for that tonight after work. thanks for the help. can you explain how to look for it?

am i checking to see if there is damage by the atty on the super t?

 

[forcedfuel50]

yeah, just wash your adapter threads out with dishsoap and a toothbrush then you can see down in there pretty well...just see if the threads look of, if they do, then you know it's your atomizer, which, if you were careful when trying to thread it in and it just didn't go, you can almost bet its your atomizer brand.

This is a great place for atomizers and the have a rock solid reputation and fast shipping,
Wholesale & Retail Best E-smoking Supplier


David

 

[metapuff]

hope i wasn't being unclear about this but we're talking about the atomizer that was ordered and sent along(included) with the super T. i'm not sure what brand it is. i received the superT and all accessories i ordered at work, so i had no other atties to test with. just what came with the order.

soon as i got home i was able to grab other 510 atties and do the test. also tested the atty that came with the super T order (that didn't work) and test it on my regular 510 battery (then it did work and screwed in normally with no extra hard turning required) but going back to the superT it once again was tough going through the threads.

all my other 510 atties go into the superT just fine. just not the one that came with the superT(but it curiously works with regular 510 batteries with no problem).

this is not to knock the superT at all. i love the dang thing to death and it has only been a day since i've received it.

 

[forcedfuel50]

OK! Now i get it, sorry. The 510 atty i sent you isn't screwing in, correct, but the 510's you already had are?

Throw that atomizer away then, it probably has a manufacturing defect in the threads and you don't want to hurt your Super T adapter trying to screw it in. I'll send you out a new atomizer.

David

 

[grimmer255]

wow thats what i call good customer service.

 

[metapuff]

that's GREAT service. thanks David. i checked the thread on the superT adapter for the 510 and all looks good to me, i don't see any damage to it (though i didn't do the soap and water wash).