Hello everyone, I recently bought 2 Themis dual coil rta's but due to lung problems I really need to stay with single coil builds. I have looked everywhere I can think of to find the single coil build deck for these RTA's but keep coming up empty. Does anyone know where I can buy just the single coil deck alone without having to buy the entire Themis RTA? Thanks in advance to anyone who can help me with this problem, Bill
Help with Digiflavor Themis
- Thread starter Bill M.
- Start date
- th_trl_thread_readers 0
-
- Tags
- digiflavor help themis
- Status
You use the same deck. They don't sell a single coil deck.
A coil with a larger diameter with a 3.5 mm or 4 mm core. You then put the legs of the coil on the opposite sides of the deck and straighten it out to line up with juice flow holes. Then wick.
There is a mesh deck that you can buy from Geekvape. But the mesh might be more than you could vape as it is probably more than a dual coil vape.
Build Decks - Parts & Accessories Geek Vape Online Store
Build Decks - Parts & Accessories Geek Vape Online Store
If you use 24 AWG Kanthal at 3.5mm core. You can get around a 0.7 ohm coil at 7 wraps that is vapable at less than 30 watts.
If you use 24 AWG SS at 3.5 mm core. You can get around 0.35 ohm coil at 7 wraps that also is vapable under 30 watts.
Thinner wire would give higher ohm but is too flexible
Beamslider, just tried your advice with a 4mm ID coil and it worked great! Thanks again for your help!!! Bill
Beamslider, I went with a 4mm, 26 ga, 9 wraps and ended up with a 1.3 ohm and 39 watts. Still a bit harsh, so I will try the 24 ga. with 7 wraps to get the lower wattage. All in all it works fine, thanks again for your help!
- Status
Similar threads
