Help with Provari.

[adam.phillips]

Ok so I did all kinds of research here in the forums and a couple of others before I quit analogs. I ordered a Provari and a MAP tank figuring it would be the best thing to get me to stop. I also ordered some of the 3.0 ohm ce2 xls to cut for the tank because I couldn't find the lower resistance ones anywhere. The MAP was supposed to be 3.2 ohms but it comes out to 2.7-2.8 on the provari. I pulled the one that came with the tank so I could figure out to cut my own. I put one of my own in the tank after cleaning it, cutting the wick, burning the wicks, and a short dry burn. The flavor sucks at almost every voltage. so I drained the tank and put the 2.7 in and it vaped/tasted awesome at about 3.9v for me. Are the 3.0 ohm ones bad for the provari? Anyone else experience this?

 

[Sugar_and_Spice]

The 3.0 ohms are really meant for 3.7v batteries or lower. You could try some HV atties from Ikenvape.com. That's is when the vaping on Provari becomes awesome.

sas

 

[adam.phillips]

so if i lower the voltage to 3.7 or lower it should vape well?

 

[speedemon]

I use 3.0 all the time on provarie in a tank at 4.5-4.7v seems to work good.Maybe you got a bad one try to clean again.I wouldn't use a 3.0 at 3.7 or less not enough volts.

 

[Sugar_and_Spice]

You can try it and see if you like it. I did not have good experiences with the clearomizers and/or map tanks on my Provari. And I tried all different ohms. To me they are just better on eGo's Rivas etc. If you like the 2.6-2.8ohms then just stick with that.

sas

 

[speedemon]

Well said,with the tank i always tip it upside down or role it keep it wet.Do like hv attys the best!!

 

[adam.phillips]

Ok so the HV attys are what you all recommend, do you all direct drip? If not what are you using on your attys? What brands do you use?

 

[speedemon]

I use joy hv from libertyflights 5 pack good deal don't forget to hit the 20% off on sight,also standard joy attys,Janty good also cost allot though.

 

[speedemon]

Forgot yes drip and the joy hv attys from lf work best debridged yet to kill one of these and i use them at 5.1v.

 

[adam.phillips]

awesome thank you so much for the help. I guess i'll get a couple attys and try em out.

 

[jimho]

Don't feel bad. I couldn't get the cartos to last more than a day with the MAP Tank mod- all my juices taste burnt and look gross.... even at 3.7V. Some people seem to swear by them, possibly something with the juice.

 

[adam.phillips]

I've tried this map tank thing for two days now. It vapes like a monster, has ok flavor on three of my juices but now im getting a strange sensation like i just gargled with peroxide. I guess it's what you could call cotton mouth even though iv'e never experienced it before in my life.

 

[speedemon]

I've tried this map tank thing for two days now. It vapes like a monster, has ok flavor on three of my juices but now im getting a strange sensation like i just gargled with peroxide. I guess it's what you could call cotton mouth even though iv'e never experienced it before in my life.

That can happen your probably hitting hot.Make sure you clean the ce2 about 1-2 tanks of use.I use my tank and drip alternate between the2.Seems with the ce2's that can happen thats one reason i don't use it all the time.I also expierenced that more often when i was newer to vapping not no more.

 

[adam.phillips]

Ok so this is probably normal from switching to vaping from analogs.

 

[BiancaMontgomery]

Boge 3ohm cartomizer are fantastic on the ProVari (or any higer voltage mod). 30 to 35 drops in one, set your ProVari anywhere from 4.5 to 5.5v...depending on what tastes and hits best to you and enjoy.

 

[adam.phillips]

So finally what I am gathering, the Provari was a good choice but the MAP tank wasn't so good for me. I should find good Cartomizers like the Boge you suggested and the attys Speedemon suggested. That sucks. With my line of work I cant be carrying a lot of stuff around. I was looking for a good 12-16 hour vape system with the least amount of parts and maintenance for daily use. I can probably drip off duty but how often do the cartomizers last under moderate vaping before refill?

 

[BiancaMontgomery]

So finally what I am gathering, the Provari was a good choice but the MAP tank wasn't so good for me. I should find good Cartomizers like the Boge you suggested and the attys Speedemon suggested. That sucks. With my line of work I cant be carrying a lot of stuff around. I was looking for a good 12-16 hour vape system with the least amount of parts and maintenance for daily use. I can probably drip off duty but how often do the cartomizers last under moderate vaping before refill?

Well, you figure you got a ml in it to begin with, and then figure out how many ml you vape in a day...I have a ml in mine, and I vape about 4ml a day. So, I would need the one carto and a 3ml bottle of juice if I were to be out ALL day. It's not much to carry really. I think how long the carto lasts between filling depends a lot on how you vape it and at at what voltage...you'll have to do a test and see.

 

[BiancaMontgomery]

OH! Also, nhaler just put up these 3.5ml cartos that are internally set up very similar to the Boges....I would start there if I were you, it may be the answer you're looking for. Jumbo 3.5ml 510 carto...2.3 to 2.5ohms...vape it at 4.2v for a good long while I'm sure. I just found out about these things today.

 

[adam.phillips]

Are these the ones you are talking about? New Jumbo 510 3.5ml Cartomizers

 

[Sugar_and_Spice]

Are these the ones you are talking about? New Jumbo 510 3.5ml Cartomizers

Hello and yes, I believe this is what Bianca was referring to.

sas