help with stingray clone and authentic enigma rda..

[Lucasness]

I have an enigma rda. I just got a stingray clone by infinite. I thought the switch was funny at first but upon further investigation I think the 510 connection on the enigma is fairly short. I can screw the enigma completely flush onto the top cap of the stingray. The stingray has a floating pin, but with the atty completely screwed flush I can still push the pin all the way in like it's not hitting anything. It fires, but sometimes it don't fire as hard. Or at all. So how can I get the center pin on the enigma to come out further? Is it adjustable? It's my only dripper and when it hits, it hits hard, sometimes. But I don't want to break it trying to pull the center pin out. Is it made to adjust the center pin?

 

[Faust1]

Mine has some play. The new version has a gold plated finger screw as opposed to the gold Phillips. Both versions can be adjusted but lightly tapping on that center post with a small rubber mallet.


Sent from my iPhone using Tapatalk

 

[Faust1]

Sorry tapatalk was acting funky.

Remove the Phillips screw or finger screw first, and then tap the center post. I use a rubber grip vice with the post in between the jaws. Should slide out fairly easy. The newer version (with finger screw) actually comes with an extra center post.


Sent from my iPhone using Tapatalk

 

[classwife]

Moved to APV Discussion from Tips and Tricks

 

[Lucasness]

Sorry tapatalk was acting funky.

Remove the Phillips screw or finger screw first, and then tap the center post. I use a rubber grip vice with the post in between the jaws. Should slide out fairly easy. The newer version (with finger screw) actually comes with an extra center post.


Sent from my iPhone using Tapatalk

I must have the newer version cuz I got the finer screw and Phillips along with an extra center pin. Why did they include the extra center pin? I would like to make this my cloud machine but need some pointers on a good build. Also, when I use the Phillips head screw on the center post it almost touches the negative screw heads, it's literally about 1 mm. I've had it act up because a juice drop was touching the center and negative screws. So I always have to make sure juice isn't bridging and causing a short

 

[Faust1]

Post a picture of the screws and post holes. I can tell you what version you have.

I rock a quad vertical coil on my newer one and it hits like a beast....

As to "why they provide an extra post?" I just never look a gift horse in the mouth!


Sent from my iPhone using Tapatalk

 

[Lucasness]

Post a picture of the screws and post holes. I can tell you what version you have.

I rock a quad vertical coil on my newer one and it hits like a beast....

As to "why they provide an extra post?" I just never look a gift horse in the mouth!


Sent from my iPhone using Tapatalk

How do I post a pic? Yeah, I'm not to tech savvy..

 

[Faust1]

The easiest way is to download Tapatalk for your mobile device. It allows you to take a picture, resize and post seamlessly.


Sent from my iNest using tarantula legs.

 

[ChuckNCloudzz]

my suggestion would be to install your enigma after putting a battery in it and having the switch tightened i have both and have never had any issues here is my current set up and build

video

 

[Faust1]

Nice coil! ^_^

*runs home to try*


Sent from my iNest using tarantula legs.

 

[Faust1]

my suggestion would be to install your enigma after putting a battery in it and having the switch tightened i have both and have never had any issues here is my current set up and build

Where did you score those finger screws on the enigma? Mine only had a center fingerscrew. Certainly would make things easier!!


Sent from my iNest using tarantula legs.

 

[Lucasness]

my suggestion would be to install your enigma after putting a battery in it and having the switch tightened i have both and have never had any issues here is my current set up and buildView attachment 331548View attachment 331549

video

My screws on my posts don't look like that. I have 3 Phillips, or a gold finger screw for the center. With all 3 Phillips I have like 1 mm between the screw heads, they're not spaced like yours. I got ripped off