Help with tone flavor down and dilute

[wrecks]

I got 2 bottles of premade juice that is 24mg Nic 30ML 80PG/20VG Double Flavored. Problem is that it taste horrible (maybe to strong) and want to tone the flavor down and dilute the juice.

I want to bring it down to 70/30 and maintain the NIC level if possible. I have these materials to cut the juice with.
100% VG
100% PG
100% 50mg NIC VG

Can folks help me cutting down? I suck at math.

 

[DM]

I have done this myself...Probably the hard way too. I'm sure others will chime in and give other advice. Do you have ejuice me up calculator on your computer??? If the bottle of juice you have is close to being full, You will need a empty bottle/bottles..a 5 or 10mil to mix a small batch and see what works flavor wise to you. Example = in a 10mil reduce flavoring at 25% to start... so using the calculator, you only want to make up 2.5mil batch using only your 100%vg 50mg nic at 24mg strength and then use either the vg or pg to finish off the total in your 2.5mil batch.....add to the 10mil bottle and then add 7.5mil of your potent flavor you want to reduce hope this helps

 

[DM]

here's the calculators......eJuice Recipe Calculator
and............ eJuice Me Up - e-Juice e-Liquid Recipe Calculator

 

[DM]

I just did the math for you using ejuice calculator on my iphone... This would be diluting your mix at 30%..might be to diluted for you that's why I say start with a small batch
In a 10mil bottle using your nic to make 24mg using a syringe put in 1.4mil of your nic and 1.6mil of your vg or pg and to finish, add 7mil of your pre made juice you want to dilute

 

[wrecks]

I'm getting how mix the nic to my liking to ready to dilute the original mix. What I'm not getting is how you came up with adding 7 mil of premade juice. Do I enter that at Flavoring 1 in the Ejuice Me Up calculator? If I do how should it the numbers look like?

Flavoring 1 - Coke - PG 80% - VG 20% and xxx??%

 

[DM]

I'm getting how mix the nic to my liking to ready to dilute the original mix. What I'm not getting is how you came up with adding 7 mil of premade juice. Do I enter that at Flavoring 1 in the Ejuice Me Up calculator? If I do how should it the numbers look like?

Flavoring 1 - Coke - PG 80% - VG 20% and xxx??%

your only making a 3mil batch on the calculator.....so no flavorings....the 7mil of the juice you are trying to reduce should not be entered on the calculator......The calculator Below was done from ejuice recipe calculator
eJuice Recipe Calculator
User Input
Nicotine Base 50 mg/ml
Target Nicotine Level 24 mg/ml
Amount to Create 3 ml
Water Added (optional) 0%
Flavor Percent 0%


Recipe
ingredient ml 20 drops* % of total
PG or VG with nicotine 1.4 ml 28 drops 46.7%
PG or VG (no nicotine) 1.6 ml 32 drops 53.3%
Water 0.0 ml 0 drops 0.0%
Flavoring(s) 0.0 ml 0 drops 0.0%

 

[wrecks]

K, I get it now. With a 10 mil batch, we are attempting to reduce the flavor by 30% my mixing in 3mil of 24nic of PG/VG (50/50). And because I made it 50/50 that should dilute it even more?

Will give it a shot.

 

[DM]

Good,....If it ends up being to week, bring it up 10% just add 1mil of your potent juice to your new mix. That will make your blend at 20% diluted

 

[wrecks]

Acknowledged and thank you. Have a good 4th.