Help With Vaperite Juice

[ithinkbutn2m]

Hey everyone!

I recently ordered a bunch of Vaperite juice as I heard they have some of the best tobacco blends. I got some of the organic blends and natural blends at 50/50 PG/VG. I usually drip onto a Cisco LR306 atomizer at 1.5 ohm on my Silver Bullet 3.7v but I am having some issues.

It tastes very dry. It is almost like the liquid is too thick for this LR306 which is find impossible because I have read of so many other people having great success with LR306 atomizers and Vaperite juice. When I drip it into a standard resistance 2.5 Joye 510 atomizer on my GLV2 5v it is fantastic. It doesn't feel like I have to pull thick liquid into the atomizer like it feels with the LR306.

I am not sure if I am doing something wrong but I am getting very discouraged. I have never had this problem with my LR306 atomizers with any other juice. This is the first time I have ever used a 50/50 blend but should it really be this big of an issue? I was really hoping I could enjoy these Vaperite juices on a LR atomizer like everyone else

The Cisco 1.5 LR306 atomizer has been debrigged and dewicked, too. Please help!

Thank you

 

[Joe_Atlanta]

Vaperites VG is really thick (I have some of their plain VG for mixing). You can cut the 50/50 mixes with 10-30% PG without altering the taste much at all. I do that with most of their stuff so it won't clog my cartos so fast. I've also heard that some folks add a little distilled water.

 

[JustaGuy]

Bump.......

 

[ithinkbutn2m]

Same problem?

 

[washvap]

Is this a new atomizer or have you been using this for a while? If the answer is the second part of the question than you will have to clean it. LR 306's have a tendency to get gunked up pretty quick and it always helps to maintain it properly.

I use Gorilla Juice (100% VG) all the time in my REO with a cisco 1.5 306 and have to clean it after a day. Two days if it's a 80/20 blend.

 

[hairball]

If you're getting the dry hit as you say, clean your atty. Unfortunately, some of the best tasting liquids are the ones that clog up everything the quickest. On a fresh 306 atty, drip 6 drips into the mouthpiece, let it sit a minute, then vape. I NEVER debridge or dewick an atty. They are there for a reason which is to help wick. You're dry hits could easy be caused by this also.

 

[juicejunky]

Seems it would be hard to miss the atomizer with no wick and bridge, it couldn't possibly be dry at least on the first hit. Have you tried on more than one 306 atomizer? I use debridged and dewicked Cisco 306 1.5s and Vaperite juices at 50/50, and all VG, and I'd have more of a problem with them burning especially the VR4 in VG. I think the 1.5 is too hot for them so it gets dark and flavor tastes more cooked.

I usually blow out my attys every few hours of heavy vaping with Vaperite stuff in a 1.5. Virgin Vapers and AVE all VG juices clog atomizers too. I don't have this problem with for example BWB.

Could it just be a bad atty? Do you have thinner ejuices to try in the atty? Is it clean? Try Vaperites new 70/30 blends next time you order.