Help.

[Ohara]

Ok so I have started ordering bits and pieces to build my first vape. It will be made from deer antler and Blackbutt timber.

Couple of questions though.

510 adapter comes in 3 variations
Sealed
Small hole
Large hole
What are each of these used for? Or is it just personal preference? Does it depend on the tank you buy? I opted for the kanga pro tank mini 3.

The only other thing that I am having trouble with is the button. What sort of button? How to mount it ect....

Suggestions please

 

[DreamWithin]

You're using the adapter for the connector on the device, right? Go with the sealed one, that way any juice that leaks out of your topper won't run down through it and make a mess inside the device.

For answers on buttons, I'd check in the Modding forum. You can get all kinds of recommendations and instructions there You'll need to get your 5 posts done in order to graduate from the New Members forum before you can post there, but you should still be able to browse around and see what others are using

 

[State O' Flux]

The only other thing that I am having trouble with is the button. What sort of button? How to mount it ect....

Suggestions please

Welcome to ECF Ohara...

Depends on what amperage you intend to carry, and if it's a wired button, or a straight mechanical. Wired buttons rated at 2a/36vdc can typically handle up to 9a/8vdc, so...

Wired buttons mount with a through hole. You can find DIY how-toos at Madvapes for simple wired mod instructions.

For a pure mech mod button assembly... Fatdaddyvapes sells brass Sigelei 19E button assemblies (and button/510 head assembly kits as well)... you'll have to female thread your body to accept the button. (scroll to the bottom)

 

[Harlen]

Hello and welcome

 

[v1k1ng1001]

I want to see an antler drip tip. That is all.

 

[RIMP]

+1 on the sealed connector. It'll keep juice from getting down in the internals

 

[State O' Flux]

I want to see an antler drip tip. That is all.

Something that matches your er, ah... helmet, perhaps? ;-)

 

[Ohara]

So its going pretty good. Starting to gather all my materials now. I ended up getting the nautilius mini instead of the kanger. Likes the look of it and wanted to try the verticle coils.

Don't a rough sketch of what it should look like

I hope this works lol.

Turns out I can't post a photo... Sorry guys

 

[Ohara]

Oh and got the ego connector from madvapes

 

[oplholik]

Deer antler and Blackbutt timber, I wanna see this one when it's done.

 

[greenfrog]

Sounds like a pretty cool idea. Definitely post pics when you are finished.

 

[Ohara]

Will I be able to post pics after reaching 5 posts or is there something else I need to do?

 

[DreamWithin]

Yep, you should be able to post pics It could take up to an hour before your permissions adjust after your 5th post (the server refreshes at 0:25 past the hour)

 

[Ohara]

Still trying to figure out the best way to attach the nautilius. I know it has a 510 thread and I am putting an ego connector on the pipe. I can get an ego/510 connector or should I try and thread a copper pipe as a joiner for a nicer/ longer shank.

 

[Ohara]

So replying to others doesn't count as a post does it?

 

[DreamWithin]

Yes, replies count. You're at 8 now

 

[DreamWithin]

Still trying to figure out the best way to attach the nautilius. I know it has a 510 thread and I am putting an ego connector on the pipe. I can get an ego/510 connector or should I try and thread a copper pipe as a joiner for a nicer/ longer shank.

Can you show (either pic or link) the ego connector you're referring to? ego connectors I've seen have two sets of threads: a 510 female thread and a larger male thread around the outside

 

[Ohara]

Can I put a link to mad vapes?

 

[Ohara]

Here is the pipe design

And this is the connector
http://www.madvapes.com/ego-xxxl-connector.html

 

[v1k1ng1001]

Something that matches your er, ah... helmet, perhaps? ;-)

Busted.