Hi guys im new here! Im having issues with my sigeili kaos spectrum 225w ecig

[HorizonAiden]

Ive tried everything but all it keeps showing low resistance an when i tried another tank it shows shortage! But when i take tank off it says check atomizer like usual!
Im unsure of what to do can i get some help or advice of what to do?

 

[Letitia]

Look up how low resistance the mod will fire. Might just be the resistance isn't compatible. Also check to see if the 510 in the mod isn't stuck, most 510 pins are spring loaded a sometimes will get stuck; especially if you over tighten the atty.

 

[Hawise]

Ive tried everything but all it keeps showing low resistance an when i tried another tank it shows shortage!

What resistance are the coils? Also, what tanks are you using?

But when i take tank off it says check atomizer like usual!

That's what it should do. When it can't detect a coil (because, for example, it's been taken off ) it says to check the atty.

Im unsure of what to do can i get some help or advice of what to do?

Step one: Post here.
Step two: Answer the questions of the people who respond.
Step three: Hopefully, find out what's going on.

 

[LAwaters]

Ive tried everything but all it keeps showing low resistance an when i tried another tank it shows shortage! But when i take tank off it says check atomizer like usual!
Im unsure of what to do can i get some help or advice of what to do?

First off - welcome to ECF! You’re at the right place to get the help you need.

I have a Kaos Spectrum that’s over 3 years old (I’m vaping with it now) and I’d be glad to help if I can. Definitely need more info though.

Besides the good questions posted by @Hawise:

• What is the coil resistance in your tank?
• What is the power setting and power level on the Kaos?
• Is it a new coil?
• Did the tank work before on the Kaos, then suddenly showed the error?

@Letitia is right about checking for a resistance problem. The Spectrum resistance range is 0.1 to 3.0 ohms. Your power setting has to be in the right range for the resistance of your coil.

Besides checking for a stuck 510 pin, you can dip a q-tip in isopropyl alcohol and clean out the 510 connector on the Kaos. Leaked juice in there will mess up the connection, and so will any dirt trapped in the threads. Then use alcohol to clean the threading on your tank.

Here’s a link that gives you things to try for a low resistance and short message. According to this, batteries are a likely culprit. Since 2 tanks gave you different errors, it could be a problem with your batteries.

Vape tutorials: How to fix Atomizer short and atomizer low warnings | Vapebox®