HIS Genesis Atomizer

[Absintheur]

I did what I so often do and ordered one of these without being able to find out much about it first. Clouds of Vapor is selling the Genesis style atty that is sized to fit and eGo diameter PV. I do not plan on using it on an eGo however, it is destined for use on one of my pipes. It comes with mesh and wire, don't know if it is a pre-made wick and coil or not but I doubt it.

Does anyone have any experience with these?

 

[Unforeseen]

Moved to Assorted PV Topics - Rebuildable Atomizer Systems

 

[pAth77]

Looks like a clone of the Line. I had a v1 back in the day and it worked well. Wick hole is located in the center, and if I remember correctly, there is no separate fill hole.

 

[dirtyrigger]

The fill hole is in the threads. I've got my buddy's HIS in my possession right now cause he was having problems with the resistance fluctuating and wanted to see if it was the atty or just his coil, dude has big hands and had an issue wrapping the positive and negative posts. Anyway, its a decent atomizer but the stock airhole is way to small, the first hit i tried to take i sucked enough juice through the wick to fill the top cap (I'm used to the draw of a 1/16 hole). The biggest issue i see is the 510 connector they used, it has the 2 small holes used on atomizers that draw air through the connection and you can't take it apart so i don't know what's going on on the inside but i left it on my counter for a day and it was sitting in about a .25ml puddle of juice that definitely leaked from the 510 cause it was upright the whole time and there was no juice on the side of the device. I used to want one until i found the puddle on my counter, now I'm glad its going back home soon.

 

[MarvelSlasher]

i'm not a fan of the HIS, here is what it looks like on the inside.

It is very hard for me to wrap the positive and negative without any screws, plus do not lay it on its side it will leak (alot).