Hot Springs?

[PosingOwl]

Not sure if this is the right place or not....

I was looking at a customers Aerotank and it was not working well for him. We got everything fixed and I took it to see what it would look like on my sigelei. Took one or two draws off of it and the bottom started to get warm.

Now my mech is not working and I am stuck using an ego with a iClear 16.... Battery works, my rda work, just not everything together. Would it be a hot spring. I have spent the last hour looking it up, but ECF was down.

Any suggestions or will I have to purchase a new spring. I checked the battery on my charger (the E-Fest LUC Smart Charger from Gotvapes) and everything looks fine. Tried 3 different batteries and none work.

 

[Completely Average]

What kind of mech do you have?

And did you really stick a "fixed" Aerotank on your mech mod and try to fire it without measuring/testing the coil first?

 

[PosingOwl]

Segelei 13a

All I did was put a new wick in it and that fixed it. I also put the tank on my ohm meter that I bring in my bag with all my tools, wick and cotton....

The wick read 2.1....

 

[PosingOwl]

Any ideas on what to do?

 

[CloudZ]

Take the #13a completely apart and clean it. If your hot spring hasn't collapsed then it is fine. You may have a really bad (dirty) connection which first got very hot then oxidized itself to totally block current flow. Some fine sand paper may be required for the cleaning. I've had this happen before on a similar mod (kts+).

 

[PosingOwl]

Thanks for the idea, I will do it once I get off work....