How is the draw on the IPro?

[caged]

I am using an E-Power right now, and besides being a cheap unit, it has a very stiff draw. How is the draw on the IPro?

 

[Wharf Rat]

I have the 510 and it is perfect for me. You can also use different top screws to change the draw.

 

[Michaelb83]

Draw is good on the ipro with 510 connection. Same with the vvpv i think they are the same top caps. It's Definitly better then the draw on my prodigy v3 which is a bit tighter.

 

[DRLyman]

I have the 510 and it is perfect for me. You can also use different top screws to change the draw.

I'm not sure if I remember correctly, but I swear I read that the screw size is m2. Is that correct?
Also, do you just unscrew the existing screw and screw the different one in? Is anything else connected to it underneath?
I am asking for the Buzz, but I am guessing that they are probably the same.

 

[Bovinia]

Dr, check this thread to get familiar with the top cap on your Buzz. When you change out the top cap screw, make sure the ring terminal on the underside stays put And yep, basically the same for the IPro. http://www.e-cigarette-forum.com/forum/notcigs/110719-replacing-top-cap-buzz.html

 

[DRLyman]

Dr, check this thread to get familiar with the top cap on your Buzz. When you change out the top cap screw, make sure the ring terminal on the underside stays put And yep, basically the same for the IPro. http://www.e-cigarette-forum.com/forum/notcigs/110719-replacing-top-cap-buzz.html

Thanks. That helps a ton

 

[5cardstud]

That's how I change my top cap. I just remove the screw, take off the cap pushing the center post out they slide it back in what ever one I'm putting on. It's easier than messing with that bottom screw and wire.

 

[GracieM]

Hi
I just purchased IPro this past month. I absolutely love it. I have 510 connection and use different atomizers with no problems. I have other 510 ecigs, Ego and another mod I purchased before this. The other mod is good but not near the IPro. I don't want to work for a good drag. Drag the right word? I guess

IPro definitely gives an easy, smooth and satisfying draw.