how many wraps ??

[Abdelaziz]

Good Morning,

I have a question concerning building the coil

I have
- I-Stick 50 w
- Wire Type: Kanthal A1
- tank : Lemo single coil

and I need to know how many wraps and the diameter i have to made...

I know it's a beginner question....

I used a Vapor Calc application but i need to double check......

Thanks

 

[Sgt.Rock]

What gauge wire do you have?
...and what is your desired resistance?

 

[Abdelaziz]

Gauge : 26
Resistance: 1 (OHMS)

 

[edyle]

Gauge : 26
Resistance: 1 (OHMS)

Coil wrapping | Steam Engine | free vaping calculators

9/10 wraps on 2mm
22 watts

 

[retired1]

Before going any further, get the necessary equipment before building your own coils. You should have, as a bare bones minimum, a multi-tester to check your coils before using them.

 

[Sgt.Rock]

I'd go a 3 mm coil --easier to wick properly and it won't be quite as wide as a 2 mm coil (7 wraps as opposed to 10)

 

[Mimikim1234]

Before going any further, get the necessary equipment before building your own coils. You should have, as a bare bones minimum, a multi-tester to check your coils before using them.

Yes ^^^

 

[WindyCityJoe]

Coil wrapping | Steam Engine | free vaping calculators is your best friend when making your own coils.

 

[tedigram]

Yeah I'd be pretty scared to do any wrapping without an ohm meter, even on a mod that'll read resistance for you. No sense risking it with such a cheap and easy safeguard.

 

[alex jo f]

Good Morning,

I have a question concerning building the coil

I have
- I-Stick 50 w
- Wire Type: Kanthal A1
- Tank : Lemo single coil

and I need to know how many wraps and the diameter i have to made...

I know it's a beginner question....

I used a Vapor Calc application but i need to double check......

Thanks

thats totally up to you

 

[Jugband]

Ohm reader + Steam Engine. You'll never have to ask "How many wraps" again.

Honestly, I use to search here all the time for the same question you had. I've learned, there's nothing like having the correct tools and know how to DIY just be informed, and safe. Have fun and enjoy!