i need to know what's the easiest and the best way to clean my new T3 out between juices? im not really interested in doing the "dry burn method" either unless i really have to do that either...can i just rinse it out and let it air dry before filling the next flavor juice or what do i do that works best?
how to clean my T3 out between juices?
- Thread starter gearjunky
- Start date
- th_trl_thread_readers 0
- Status
just rinse it out with hot water and let it to dry so it's always best to keep a few heads for back up's
Yeah, they leak a little. I have never heard of one that did not make the gurgling sounds - there is an open port between the wick and the battery end, so I can't see how it would'nt.
Waiting to get a giant glob in my mouth, but that never happens.
Waiting to get a giant glob in my mouth, but that never happens.
If you have any extra wick available from a used clearo or something you can always lay another wick on top of the wick that's already there. It'll make it tighter and less prone to leaks.
A little hot water and some shake is good for the T3 housing. Follow it up with an alcohol soak and then let it dry. It shouldn't be too long as it will dry up quickly. As for the coil, there really is no easy way to do so with out dry burning. Your coil will naturally build up gunk from the liquid and a simple hot water bath isn't going to change it much. Don't let the dry burn scare you. It's actually pretty simple when you see it done. A youtube search should yield you excellent results. I've also heard people having success using a cheap $20 ultrasonic cleaner with some vodka.
so how or when will i know its time to actually clean my T3? like i said i havnt used it yet. im a really light vapor, and i dont intend to probably be using the T3 alot at first...i bought it mainly out of curiosity and im a GEARJUNKY...lol...lol.
I am not a very heavy vaper. I use about 1 ml per day most days (because I can't vape while working, just at breaks) and I clean mine about once per week, maybe throw in an extra cleaning if I use it heavier on an odd day. I change heads about every 3 or 4 weeks.
I learnt...don't soak the tube...in hot water..........I did.....and after drying,refilling...screwing back on...the silver top under mouth piece snaped off..the hot water...wore down the glue...so I just do a rinse in luke warm water now..soak a pipe cleaner in vinger...and give it a good wipe over....no therers no vinger after taste...just get another dry p.cleaner...they come up good....
With my first one I got the gurgling and leaking onto the battery as well. I found that if I filled it with 100% VG it would leak, so I rinsed the whole thing out and refilled it with some SI 555 and it worked fine with no leaks. I did get the gurgling sound but that comes from blocking the air holes and if you block them and pull too hard on the vape you can flood the chamber and then it goes onto the battery again. I got another 2 and filled them with SI RY4 and Desert Joe no problems. I am using a x2manual.
- Status
Similar threads
