How to properly wick UD Bellus !

[vaperape]

Hi all ! I can't seem to wick it properly. I've tried short and long tails, it still leaks whenever I refill it. No matter if I invert the tank right before tightening the last bit with the AFC closed, it still leaks. Help pls !!

Wicking method with pictures will be much appreciated !

Btw, I'm currently using 26/32 2mm ID Clapton with 6 wraps !

 

[dc99]

Im not ducking the question but youtube is your best friend on this.

 

[cloudysheep]

UD Bellus

wrote a mini tut, i think its on page 2 or 3

 

[Valld]

Hi vaperape, I had exactly the same problem with exactly the same set of clapton coils! I solved the problem with replacing the coils with 28 Ti/ 34 Ka claptons, 2.5 ID, 5 wraps only, much smaller coil, still producing plenty of vapor. Not a single wicking problem since! I can even fill the tank without closing the airflow ring now, with no leaking at all. Try it, it might work for you as well. I believe the problem was with the too big coils with not enough cotton going through them and into the deck....

 

[ashtrayogdc]

Make sure wick is about half way or a bit more into juice channels. Also I had this problem at one point when I raised the coils to high. I lowered the coils and the problem was solved. 2.5 id coils.