Im looking for some how to's or detailed instructions on how to turn a RCA jack into a 510 atty
how to RCA Jack Atty?
- Thread starter dogpound9219
- Start date
- th_trl_thread_readers 0
- Status
Holy throwback to early 2009, Batman! =)
Somewhere in the modders section you will find threads where folks adapted RCA jacks to their atties. The purpose was to be able to quickly switch out one type of atty for another with the RCA as the common denominator. But, that was long ago before every conceivable type of threaded adapter was NOT yet available.
If you dont mind my asking... why would you want to adapt a threaded atty to an RCA jack?
Somewhere in the modders section you will find threads where folks adapted RCA jacks to their atties. The purpose was to be able to quickly switch out one type of atty for another with the RCA as the common denominator. But, that was long ago before every conceivable type of threaded adapter was NOT yet available.
If you dont mind my asking... why would you want to adapt a threaded atty to an RCA jack?
This is the first im hearing of this but I like the idea. If you are going to make a series of rebuild-able atties that are interchangeable then I see the use. Otherwise if your a regular atty user you would wear through them too fast to make the mod worth it.
I don't think I get what you are getting at, you saying its not worth making one because you would go through what? The rebuildable? It costs almost the same to make one than buying one bit the difference is you won't have to buy one ever again. Rope cost me 7 something shipped from mcmaster Carr kanthal was 6 on eBay. So total of the wick and coil was more but you can make a lot from that. And you can also control your ohms depending on your coil. One thing I didn't really like about vaping was the China attys and how unreliable, unpredictable they where. I haven't changes out my coil in over a month on one of my rebuildables where i would burn a regular atty in 4 days. I might be making No sense so apologies for that.
I think the OP is looking for this;
http://www.e-cigarette-forum.com/fo...-everyone-brilliant-russians-engineering.html
I am also looking for this;
With better instructions and in english.
Can anyone help..
http://www.e-cigarette-forum.com/fo...-everyone-brilliant-russians-engineering.html
I am also looking for this;
With better instructions and in english.
Can anyone help..
I started this today the big headphone plug from radio shack i dont have the tank carts so just a dripper for now
Wow what a good find man! This helps sooo much!
You should totally document your experience!
I just found this, it helps with more info. I think I am ready to try it just have to find in my parts or go and buy a 1/4" jack.
http://www.e-cigarette-forum.com/forum/atomizer-mods/237114-smallest-repairable-atomizer-4.html
I will report back when done...
http://www.e-cigarette-forum.com/forum/atomizer-mods/237114-smallest-repairable-atomizer-4.html
I will report back when done...
Oring i can check i just have a box of them so i picked.one thay looked right
screws are from a pair of sunglasses just old cheapos from gas station spring was from the flint section of a bic lighter
White base is a chunk of teflon and plumbers putty
I will take picks of the next one step by step
good luck
screws are from a pair of sunglasses just old cheapos from gas station spring was from the flint section of a bic lighter
White base is a chunk of teflon and plumbers putty
I will take picks of the next one step by step
good luck
I really wish someone would post a for dummies explanation for those of us who need this to be simpler to understand.
I love it! I dont understand the screwing mechanism. What parts did you use? I want to make my own but dont know how to construct something with threads so I can unscrew the thing to rebuild it.
RadioShack
this is all u need it has threads already just have to get rid of the shaft and drill it out a little bigger for your atty connection i used my vice to press it in so i wouldn't have to glue it in
i just got home from work i will go snap a few pics and post them for you in a bit
this is all u need it has threads already just have to get rid of the shaft and drill it out a little bigger for your atty connection i used my vice to press it in so i wouldn't have to glue it in
i just got home from work i will go snap a few pics and post them for you in a bit
Last edited:
looks like that i just snap the tip off and pull the guts out
get rid of the tube and drill out the hole
I bought the part today; Thanks again for directing me in the right direction. Anyways I'll be drilling a hole soon (for air as well as the 510 connection) and devising a way to mount screws to the base.
Look at the "Line"atty. it just uses two bent wires and you just wrap the ends of the coil around them. No screws or springs, just moded my A2 to accept a vertical coil with this system.
- Status
Similar threads
- Locked
