HV Cart Mod

Status
Not open for further replies.

Silence

Super Member
ECF Veteran
Verified Member
Nov 5, 2009
823
230
Hopkinsville, Ky
Ok I need some help testing something if someone is willing...

The problem with HV mods is the constant dripping. Carts are a problem because they don't keep the atty wet enough. This is due to the wicking material not being able to wick fast enough. My theory is that if you use the ADP on a cart then use NO wicking material, the spring should be enough to hold the surface tension of the juice and it should supply enough juice to the atty to keep it pretty well soaked so that you can cart the hv mods. Anyone care to test my theory out?

Update: ok so at the risk of losing my one and only atty (others ore on the way) I tried this. And as long as you don't over fill the cart then it seems to work just fine. I vaped the cart dry at 6v and it took me about 5-6 mins. this variation of the ADP seems to work...

Update 2: on 2nd cart this leaked in to the mod about half way through the cart... still cleaning up. maybe a thin piece of filler will prevent. will let ya know.

Update 3: Ok I know what happened. The atty bridge broke the surface tension of the juice just like I intended but what I did not forsee was that the juice kept flowing when I put the mod down. So I ended up with a leak. As long as you keep the hitting it. this should work fine. If you take a hit or and put it down then this may not work well for you.

Update 4: Ok. So as long as I use only 8 - 10 drops in the cart then I get no spillage. Even if I just let it sit. I have been doing this all morning and so far so good.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread