So I dont really have this problem again, but my old vamo (that died) had a problem for a while.
A problem that almost all vamos get and thats that the 510 threading became worn... (mainly "stretched").
So then I thought, "hey, wouldn't it be great to have a ego to 510/ego adapter?"
Well, I couldn't find one online, so I made one out of spare ecig parts I had laying around.
What you need:
1x Old evod or kanger T3S base.
1x 510 to ego adapter
1x old evod head (or some spare piece of scrap metal)
1x soldering gun and solder.
So you take the 510 adapter and screw it into the kanger base to make sure it fits.
Then you take your evod head and take out the base that leads to one of the coil threads. Its like a plug.
cut the plug down a bit, and solder it to the center lead on the 510 adapter.
If you want to be extra fancy, make sure your positive and negative ends aren't crossing because of any solder/etc with a ohm meter.
Then screw your 510 adapter onto the kanger base, and BOOM! You have a ego to ego/510 adapter. No more need to worry about your 510 threads on your vamo!
I've attached some pictures of the finished product.
A problem that almost all vamos get and thats that the 510 threading became worn... (mainly "stretched").
So then I thought, "hey, wouldn't it be great to have a ego to 510/ego adapter?"
Well, I couldn't find one online, so I made one out of spare ecig parts I had laying around.
What you need:
1x Old evod or kanger T3S base.
1x 510 to ego adapter
1x old evod head (or some spare piece of scrap metal)
1x soldering gun and solder.
So you take the 510 adapter and screw it into the kanger base to make sure it fits.
Then you take your evod head and take out the base that leads to one of the coil threads. Its like a plug.
cut the plug down a bit, and solder it to the center lead on the 510 adapter.
If you want to be extra fancy, make sure your positive and negative ends aren't crossing because of any solder/etc with a ohm meter.
Then screw your 510 adapter onto the kanger base, and BOOM! You have a ego to ego/510 adapter. No more need to worry about your 510 threads on your vamo!
I've attached some pictures of the finished product.
