I cannot build anything

[Keeferes]

magma dual coil build @ 1ohm at around 14.5 watts is a lung buster.

I just noticed your drip tip. I would recommend a wide bore. Best reason I heard was video explained it like a car. Can open the intake all you want, and get tons of air in, but doesn't do the trick fully if you got tiny exhaust. The intake being the air holes, and exhaust being the drip tip. I'm waiting for mine now. I tried one, and holy cow! World's of difference.

 

[abrb701]

I just noticed your drip tip. I would recommend a wide bore. Best reason I heard was video explained it like a car. Can open the intake all you want, and get tons of air in, but doesn't do the trick fully if you got tiny exhaust. The intake being the air holes, and exhaust being the drip tip. I'm waiting for mine now. I tried one, and holy cow! World's of difference.

Any issues with juice coming through the tip with a wide bore?

 

[USMCotaku]

Do you have a mechanical?

If you guys(or gals) mind the interruption let me know, I'll stay on topic.

I have two

I currently have an itaste vv v3, a nemesis clone for dripping and a panzer clone that I use with my kayfun. I would love to use my kayfun and my pt2 (after getting an air flow base) on a higher powered variable though. 11 watts just doesn't cut it. I love dripping on a mech....but I've had the chance to try my tanks on a better variable mod.....and now I have been spoiled . I need two pieces of new gear to be sitting pretty....a better dripper atty for my panzer, and a 30-50 watt mod for my kayfun and rebuilt kanger

 

[USMCotaku]

Any issues with juice coming through the tip with a wide bore?

it depends on how you draw. I've noticed if I draw too fast, it cools off the coil and I get juice condensation in my drip tip....just slow down my draw a bit and all is well

 

[Keeferes]

I get tons of condensation from my aluminum standard drip tips. The wide bore I tried didn't seem to have any problems. However, it only took about 7 draws or so, so I can't really comment based on that little amount of use. My standard tips though, wow... It's like like linking the tip of the juice bottle. Lol.

 

[abrb701]

it depends on how you draw. I've noticed if I draw too fast, it cools off the coil and I get juice condensation in my drip tip....just slow down my draw a bit and all is well

Nice, I need to get one, I've been waiting for someone to clone the 454 big block so I can just use that drip tip on all my drippers, but I need to pick up a wide bore in the mean time.

I have two

I currently have an itaste vv v3, a nemesis clone for dripping and a panzer clone that I use with my kayfun. I would love to use my kayfun and my pt2 (after getting an air flow base) on a higher powered variable though. 11 watts just doesn't cut it. I love dripping on a mech....but I've had the chance to try my tanks on a better variable mod.....and now I have been spoiled . I need two pieces of new gear to be sitting pretty....a better dripper atty for my panzer, and a 30-50 watt mod for my kayfun and rebuilt kanger

Ya its definitely nice having the extra power, its hard to heat anything lower than 28 with a mech that isn't sub ohm. I have some 24 coming tomorrow, I'm pretty excited to try some new things.


I feel bad that this got off topic, how are the builds going gel drop?

 

[USMCotaku]

What's a topic?

 

[gel drops]

My magma for some reason did not come with a drip tip I am using the one from the Patriot,I'm definitely going to have to invest in some more drip tips,no leaking issues with the magma,however a bunch of condensation build up on top piece,I think it's because of the drip tip they draw is extremely airy,even if the adjustable air flow ring is set on they smallest hole.

 

[USMCotaku]

Airy is good, if you are going to build sub ohm

 

[USMCotaku]

If you pull too hard, you cool your coil more....I've noticed I get much more juice condensation when I do hard fast draws

 

[USMCotaku]

Just finished rebuilding my nimbus on my nemesis

 

[USMCotaku]

Vapor is great at .55 ohm

 

[gel drops]

I have had my kayfun + for 2 or 3 weeks now I finally actually open it and unscrewed it how do you get to the post it has a small ring around it maybe I unscrewed it the wrong way..I only ordered the magma,patriot,and the kayfun lite + v2 dual airflow.The reason i started with the magma I thought it was the cheapest one that I bought,looking at my invoice the Patriot is the cheapest one that I purchased $12.99.Just starting out I wanted to use the cheapest one so if I made a mistake I guess and broke it.Magma was $18.99,Kayfun was $29.99.Point being I'm apparently ordering too much at one time especially if I don't even know how to take one apart to make a build! USM organic cotton? that's what I'm using also.I realize people are not doing are making a build everyday,I do like it when they post them it helps a lot.

 

[USMCotaku]

The chimney is two parts...sounds like you only removed the top part...the part surrounding the post will also unscrew

 

[USMCotaku]

As long as you are learning the important stuff, don't sweat the small stuff

Each atty is different, and tend to come sans directions...we all go through it with new gear

 

[gel drops]

I was thinking to myself how in the world am I going to make a build out of this when I cannot even get to the post .

 

[USMCotaku]

Did you get the bottom part off?

 

[gel drops]

Yes..finally there is a lot of pieces to this atomizer.

 

[USMCotaku]

I have to say it's totally worth the effort. The kayfun has become my all day vape. So much more vapor and flavor then my other tanks (other then my Frankenstein sub ohm kanger....that has a bit more flavor....but kayfun still gives more vapor then even that one).

 

[USMCotaku]

Did you watch the video on kayfun building I linked to earlier? Wicking is important on the kayfun, but if you copy that guys wick, you will be golden