I cannot build anything
- Thread starter gel drops
- Start date
- th_trl_thread_readers 0
-
- Tags
- kayfun burning
- Status
Or were you talking about that evil plastic that puts you in debt? Won't touch that either 
Heck, even a 20 watt mod would do me better then my 11 watt v3. It did me great for half a year....just outgrew it
Made it out of a case I found at the salvation army thrift shop. Sewed in elastic straps
I really need something like that however all of my junk I would have to have one modified I suppose.I have stuff scattered in three different rooms.
WalMart has a Nintendo ds case that makes a good vape case. Lots of room. With all your mods you would still need to pick and choose what came with you though
Your Magma is too tight even on the smallest air hole? Wow! I have mine fully open with a wide bore drip tip and it is on the tight side for me compared to my Plume Veil.
I love super airy draws, especially when doing lung draws with my drippers.
I tried for nearly 2 months and got nothing but burnt cotton to show for my KFL builds. The thing isn't designed for average builder.
Just get a dripper. Get one with 4 posts and set screw terminals. I love the brass monkey but there are others out there.
Just get a dripper. Get one with 4 posts and set screw terminals. I love the brass monkey but there are others out there.
Gator I am having to use a drip tip from the Patriot maybe that has something to do with it.In this order,TH is a must for me if not I will be at the store buying a pack of cigarettes,taste comes second,then the amount of vapor..
Last edited:
Many drippers don't come with their own drip tip. Most people tend to buy different ones to use any ways. Your th on a dripper is going to mostly come from the nic and pg levels. At least for me that's what I find.
@regal... The Kayfun is one of the easiest systems to build for out there. What problems were you having? Maybe some pics of your build and we could help you get things straightened out.
@regal... The Kayfun is one of the easiest systems to build for out there. What problems were you having? Maybe some pics of your build and we could help you get things straightened out.
Although I agree with Keferes on the nic and pg levels helping TH, I also believe TH can be affected by air flow. I think that's what gel drops is doing. Using a tighter draw to get a warmer hit.
gel drops, silly question but you do have your AFC ring set for a single coil if that's what you are using, right?
gel drops, silly question but you do have your AFC ring set for a single coil if that's what you are using, right?
nic between 24/36 ..i have a dual coil build with both holes open.Im thinking it's a drip tip issue not real sure.Im going to move on to the Patriot see if that makes a difference.
Last edited:
Just thought I'd leave this here for you Gel drops. Wanted you to see that once you get a good coil built, that you like, on whatever topper, you can carefully remove the old wick, dry burn the coil, and replace just the wick. I use this KFL+ daily. I run through about 1 tank every 2 days. I alternate between another KFL+ and an APO.
This is a 1.8 ohm coil dry burned and first rewick. Only took me about 3 minutes to rinse everything off, dry burn the coil, and rewick. Originally built this coil back on July 29th. Still good as new almost a month later. Much better lifespan compared to prebuilt Kanger or Aspire coils.
This is a 1.8 ohm coil dry burned and first rewick. Only took me about 3 minutes to rinse everything off, dry burn the coil, and rewick. Originally built this coil back on July 29th. Still good as new almost a month later. Much better lifespan compared to prebuilt Kanger or Aspire coils.
You guys need to get up to speed. Cotton is old school. Rayon is where it's at now boys.
- Status
Similar threads
