I can't decide which mod! Help!

Status
Not open for further replies.

DaMulta

Ultra Member
ECF Veteran
Jun 18, 2009
2,300
11
45
T-Town Oklahoma
Why not a GG????I've always wanted one..just never had the funds when they are in stock..They are in stock right now too at Joye eGo | Joye 510 | Electronic Cigarette supplies | Batteries, atomizers, cartomizers, e-Liquid and more!


:p I llove SB cause well it does not go off in ones pocket:p Also it does not matter if I even try to jack it up...I was working on my bike the other day, and did I ever get it coated with oil.....Just took it to the sink and washed it like I would any other dish lol....


Also have you thought about getting a wooden one? It's STRANGE, but people don't pay attention to wooden e-cigs for some odd reason....Not that I really don't care....I vape my SB with pride in public....I only get a few looks now and then of I can't believe he is smoking that in public...lol
 

DaMulta

Ultra Member
ECF Veteran
Jun 18, 2009
2,300
11
45
T-Town Oklahoma
The Buzz is one that I really just have not had the urge to really even want.....Don't know why....

I know that you can dial the voltage, but that can just be solved with batteries/different ohm atties....That's just me


If anything if I was to buy another mod it would be one of the three. Another Phidias with the juice feeder(onsale at nhaler for 100), the GG with AFS, and or Ali'i Custom Order.

Ali'i Custom Order

dsc_4683.jpg


Ali'i Custom Order has really been eating on me too.....I just think it's stunning....
 

DaMulta

Ultra Member
ECF Veteran
Jun 18, 2009
2,300
11
45
T-Town Oklahoma
A 18650 battery last me 2 days of good vapping before I really have to swap them out.

Most of the time I just swap it out say around 6am, but I don't go to bed till around 12 at night.

It's a battery that just keeps on rolling. Most big mods take the 18650 battery.


E-Liquid planet is going to release the helix soon BTW 4000mah:p CRAZY insane batter.
 

Travis798

Super Member
ECF Veteran
Nov 7, 2009
378
29
45
Oklahoma
Well considering I don't have all the mods the only thing I can give my opinion on is the prodigy v3.

I've only had mine a few days but so far I'm really digging it. I will say if you want to do 6v make sure to have plenty of atomizers, and there seems to be a bit of a learning curve (I fried the 3 spare I had in a day). I'm stuck on 3.7v until I get more atomizers in, but the prodigy itself, minus my lack of respect for 6v and not keeping the atomizer wet enough, is a very good unit. It's completely mechanical including the switch, so you don't really have to worry about things going wrong with it, you just have to take a few minutes a week or so and clean your switch. It's nice, it's simple, and it works.

Oh yeah, it uses the AW 17670 battery for 3.7v. I've been using this battery for 24 hours now, and according to my multimeter (just pulled it out and checked it) the battery is down to 3.73 volts. So you get plenty of time from one battery.

Is now the time when I give my a mod is a mod is a mod speech? These things are all pretty much just battery holders. Decide what voltage you want, and pick the one that you think looks the best that does the voltage you want.
 

banjo

Vaping Master
ECF Veteran
Verified Member
Jul 25, 2010
3,350
215
Rio Oso, CA
I don't understand why there is no "auto" feed, like the REO or Phidias on your list. Why do you want to be tied down to a cart/cartomizer that requires you to carry a bottle of juice around, and towels to clean up the mess?
With an "auto or bottom" feeder, you eliminate the need for a cart or cartomizer that you have to refill, and the need to carry around extra bottles of juice. With the REO Mini (see here: REO's Mods | Home of the REO PV ), for example, you have a 14500 battery and a 3ml dispenser bottle that can get you through a full day of vaping with no hassles. The REO Mini comes with a 510 adapter, and I use LR510 attys that work great, but you can, by using the proper adapter, use almost any atty that suits your vaping needs. The Phidias is another great mod that functions exactly the same as the Mini, and it is worth considering. Just a thought, and an opinion, especially if you want a mod that is more than an expensive battery holder.
 

jmaul99

Super Member
ECF Veteran
Jul 19, 2010
361
2
Marietta, GA
I know you didn't mention it but the 5V GLV2 is an awesome mod. Sturdy button that will last for years.

I don't understand why there is no "auto" feed, like the REO or Phidias on your list. Why do you want to be tied down to a cart/cartomizer that requires you to carry a bottle of juice around, and towels to clean up the mess?
With an "auto or bottom" feeder, you eliminate the need for a cart or cartomizer that you have to refill, and the need to carry around extra bottles of juice. With the REO Mini (see here: REO's Mods | Home of the REO PV ), for example, you have a 14500 battery and a 3ml dispenser bottle that can get you through a full day of vaping with no hassles. The REO Mini comes with a 510 adapter, and I use LR510 attys that work great, but you can, by using the proper adapter, use almost any atty that suits your vaping needs. The Phidias is another great mod that functions exactly the same as the Mini, and it is worth considering. Just a thought, and an opinion, especially if you want a mod that is more than an expensive battery holder.

Problem with all the auto feeds you've mentioned are only 3.7v the high voltage auto feeds are very expensive. Actually the GLV3, when it is released, will be a variable volt, auto juice feed model.
 

T^2

Full Member
ECF Veteran
Apr 27, 2009
58
0
Maryland
I know you didn't mention it but the 5V GLV2 is an awesome mod. Sturdy button that will last for years.



Problem with all the auto feeds you've mentioned are only 3.7v the high voltage auto feeds are very expensive. Actually the GLV3, when it is released, will be a variable volt, auto juice feed model.

The bottom feeders come in any voltage that you want. They also have variable voltage versions. The Ali'i has 3.7V/6V and variable volt versions. Other bottom fed box mods are similar.

Yes a hand made box mod comes at a price. Mine cost me $135. Well worth it in my view. However, you could always make your own on the cheap or you could get a Wetbox, which comes in around $50.
 

Firefly13

Unregistered Supplier
ECF Veteran
May 24, 2010
1,136
66
Oklahoma, USA
www.blackvelvetjuice.com
The Buzz is not that good looking IMO, and it's got electronics inside it, if i'm buying a proper mod it's gonna be 100% mechanical, my fav in my collection is my GG Telescopic Slim, i can run anything on it with different batteries and cartos / attys, 3.7v, 5v, 6v. It's a looker too, and only available at Vapor Kings. I also had the magnetic button installed so that there is no spring to wear down.

I am an avid carto user, the whole juice feeding thing is ......ed to me when i can just switch cartos over in a couple seconds to change flavors.
 
Last edited:

thewomenfolk

Vaping Master
ECF Veteran
Verified Member
Sep 6, 2009
3,124
2,807
Colorado John 3:16
DaMulta, unfortunately I signed up with that link you gave.... VapNReview....and it welcomed me for registering and then says 'the following errors have occurred', which I can't read because it's written in dark blue on the black background....so much for that. They don't give a way to contact them so I can't do anything about it. Now they have all my info and I have none of theirs. Lesson learned....don't sign up on sites that bar you from communicating with them.
 

DaMulta

Ultra Member
ECF Veteran
Jun 18, 2009
2,300
11
45
T-Town Oklahoma
Lu is on this chat about every evening....

http://vapersplace.com/wp-content/plugins/wp_flash_chat/123flashchat.php

IDK why he is making everyone log in before they can watch videos now.

If you re-click the link you can't watch it now? Your screen name didn't work? I signed up last night with no issues....Hmmmm

It's a legit site...TON of vapping reviews on it. Last night there was talks about SJ(owner of ECF) doing a interview on it.



Here is the contact us link

VapeTV: Contact us
 

Painterface

Senior Member
ECF Veteran
Verified Member
Sep 5, 2010
134
2
Cincinnati, Ohio
I am an avid carto user, the whole juice feeding thing is ......ed to me when i can just switch cartos over in a couple seconds to change flavors.

I think the juice feeders DRIP the juice, so you get automatic dripping, which a lot of people like better than just using cartos

plus you're refilling the cartos, unless you're just buying a carto, using it once, and then tossing it, which can add up in price.

I'm getting a mod soon and doing a TON of research. I like the idea of variable voltage AND juice feeding, but man, the price for those is up there...
 
Status
Not open for further replies.

Users who are viewing this thread