I got a BP!!!

[pizza2me]

This thing is awesome! And extremely well built. Just like all that I've read about it. Some may have noticed me asking a bunch of questions here lately. I was lucky enough to win it from another ECF member. He had a contest for VV-less folks.

I love VV and will not go back!!

I'll prolly be asking more questions too. So here's a couple.
Somewhere I saw approx's of what each color's V is. Can somebody point me to that?

I was tring to meter the BP last night. Couldn't get it to work. (Yeah. I'm an electronics numb-nut). Is there a pic or video?

I mainly use 510s cause I don't like using adapters. I'm guessing I can buy an 801 top cap and use my IKV Fusions. (HI 5Card! ) is this correct?

I think that's all for now. Love this piece!!!!!

Oh! What's the #113 on it? Is that the production number?

 

[bandmom5]

(Not 5card) But you can buy 801 top cap.
#113 is the serial number.
Don't know about metering though. I bought one that just (sorry) screws on 510.

 

[mistinthewoods]

Hi Pizza. Mine reads: Green = 3.53, Yellow = 4.5 and red = 5.2. The highest on mine is 5.6 and the lowest is 3.4.
You don't really need another cap. I'm using a Fusion now with one of these. 510 Battery to 801 Short Atomizer adapter It's so tiny you can barely see it. I've had no trouble using mine at all.

 

[kempo63]

Same here. Have a 510 cap with a shorty adapter so I can use Fusions with it but just got an M1A1 tank so I think I'm gonna order an 801 cap so the tank sits almost flush with the top cap. Kinda looks odd sticking up so far with the adapter.

 

[pizza2me]

Awesome info! Thanks! I though the yellow was around 4.2-4.5'ish. It rocks a LR carto!! And I didn't know about the shory adapter! May have to check that out. But... The Fusions are soooo good.. and SS (tank ready), I may be using them most of the time, so I may just buy the 801 top.

Hey!! (kemp's sig reminded me!!) Am I in the Buzz Army now???!?!?!?!?!?!?!?

 

[PsychOfMSE]

Congrats on the win

That was definitely a fun contest, I'm glad you're getting to enjoy a VV device!

 

[pizza2me]

Hi Psych!! Thanks!!! Yep! Unbelievable! I never win anything and then I win this prize!!! One of the best prizes out there!!! Shhhhwwweeeeeeet!!!!

 

[908Tracy]

Awesome info! Thanks! I though the yellow was around 4.2-4.5'ish. It rocks a LR carto!! And I didn't know about the shory adapter! May have to check that out. But... The Fusions are soooo good.. and SS (tank ready), I may be using them most of the time, so I may just buy the 801 top.

Hey!! (kemp's sig reminded me!!) Am I in the Buzz Army now???!?!?!?!?!?!?!?

Hey pizza! Yup, its official.....you're in the Army now....the BUZZ ARMY!!!! Welcome and I'm glad you are loving your BP.

 

[TexasT]

I was tring to meter the BP last night. Couldn't get it to work. (Yeah. I'm an electronics numb-nut). Is there a pic or video?

I mainly use 510s cause I don't like using adapters. I'm guessing I can buy an 801 top cap and use my IKV Fusions. (HI 5Card! ) is this correct?

Put your Buzz on something like a tiny pillow to keep it from rolling. When you meter your Buzz, there's a small screw on the bottom ... stick your black probe in that screw. Put the red probe in the hole on top of the Buzz and depress the button.

If you were born with three arms, this is real easy to do. If not, you might need a friend to push the button while you hold the two probes.

There's really nothing wrong with adapters. I like more of an "airy" draw and adapters will contribute to this a little (but not too much). And they do make real small adapters that you almost don't know are on there. Adapters will let you try various cartos or atty's like the Fusion, 510's, 808's, etc.

And welcome to the Buzz Army!

TT

 

[Ma'am]

Congrats on your win of the Buzz Pro! Yep, you're now a proud member of the Buzz Army.

Like you, I love my Buzz, or Buzzes cause I have several now. I love the fact that I can just turn the wheel and find the perfect vape no matter what type of carto or atty I'm using. The vv feature of the Buzz holds that same voltage until the batteries need charging, no drop off of volts like set voltage. Kinda like great coffee, good til the last drop. LOL

I stayed away from vv because I misunderstood what vv was. I've never been one that vapes at 3.7 and changed to 5 or 6 and so forth. I just liked the hit I got from a fresh, right off the charger battery, that was my heavenly vape. Finally, someone told me that vv didn't just mean "goes from here to there and back again, whatever your mood was," it also meant that I could set it at 4.15-4.20 (voltage of a freshly charged battery) and vv would hold that voltage there, no drop off after a few hits.

Once I heard that, I knew I HAD to have a vv device, but I also wanted one that was reliable, tough, user friendly, and affordable. After looking and researching, I got the Buzz Pro!

It's everything I wanted/needed and more.......the BP and Notcigs are the best out there!

 

[pizza2me]

Hey pizza! Yup, its official.....you're in the Army now....the BUZZ ARMY!!!! Welcome and I'm glad you are loving your BP.

AR..AR.. ARRRR!!!! Thanks Tracy!!

Put your Buzz on something like a tiny pillow to keep it from rolling. When you meter your Buzz, there's a small screw on the bottom ... stick your black probe in that screw. Put the red probe in the hole on top of the Buzz and depress the button.

If you were born with three arms, this is real easy to do. If not, you might need a friend to push the button while you hold the two probes.

There's really nothing wrong with adapters. I like more of an "airy" draw and adapters will contribute to this a little (but not too much). And they do make real small adapters that you almost don't know are on there. Adapters will let you try various cartos or atty's like the Fusion, 510's, 808's, etc.

And welcome to the Buzz Army!

TT

Thanks TT!! I'll give it a shot tonight. Nope. Nothing really wrong with adapters, except that I tend to lose things. I have a couple already. But, I'm pretty darn sure I wouldn't lose the cap. And it's just one extra piece I wouldn't have to worry about.

Congrats on your win of the Buzz Pro! Yep, you're now a proud member of the Buzz Army.

Like you, I love my Buzz, or Buzzes cause I have several now. I love the fact that I can just turn the wheel and find the perfect vape no matter what type of carto or atty I'm using. The vv feature of the Buzz holds that same voltage until the batteries need charging, no drop off of volts like set voltage. Kinda like great coffee, good til the last drop. LOL

I stayed away from vv because I misunderstood what vv was. I've never been one that vapes at 3.7 and changed to 5 or 6 and so forth. I just liked the hit I got from a fresh, right off the charger battery, that was my heavenly vape. Finally, someone told me that vv didn't just mean "goes from here to there and back again, whatever your mood was," it also meant that I could set it at 4.15-4.20 (voltage of a freshly charged battery) and vv would hold that voltage there, no drop off after a few hits.

Once I heard that, I knew I HAD to have a vv device, but I also wanted one that was reliable, tough, user friendly, and affordable. After looking and researching, I got the Buzz Pro!

It's everything I wanted/needed and more.......the BP and Notcigs are the best out there!

Thanks you and yes ma'am!! The most important thing for me is to have a consistant vape! So, I'll more than likely leave it in one spot most of the time. Probably turn it down a little for the first few hits in the morning. And, definitely crank it up when I'm hitting the buds.

And... Just about as important to me is to have a tough device. I am rough on things and this Buzz Pro looks and feels like its made to last!!!

 

[Bovinia]

Congratz on the awesome win Private Pizza!

Love my Buzzes!! I use adapters too but nothing wrong with wanting an 801 cap, as long as you know how to swap them out.

Loosen the screw in the well of the top cap, gently unscrew. You'll see the red wire attached to the underside of the top cap. Hold it by the little c clamp while you loosen it's screw...reverse directions to put the new cap on. If ya break that wire, I hope you have soldering skills

 

[BuzzKill]

THe EXPERTS chime in ! Enjoy it !!

 

[Bovinia]

Believe it or not, I've never had the top cap off my BP! My original Buzz is another story...!

 

[pizza2me]

Congratz on the awesome win Private Pizza!

Love my Buzzes!! I use adapters too but nothing wrong with wanting an 801 cap, as long as you know how to swap them out.

Loosen the screw in the well of the top cap, gently unscrew. You'll see the red wire attached to the underside of the top cap. Hold it by the little c clamp while you loosen it's screw...reverse directions to put the new cap on. If ya break that wire, I hope you have soldering skills

Thanks Bovinia!!! Yeah! I got a little skerred when I read in another thread where they broke the red wire. I'll wait until after the holidays and take a peek under the cap. I do not want to be buzzless over the holidays!!! Need to be able to crank those V's up during certain particular times of indulgance!

Hey buzzkill! Yep! Seems like you have a lot of experts here!!! You all will probably be hearing a lot from me! I tend to have a lot of questions.

Dam I love this thing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I did a lot of research and the BP is perfect for me! Built like a tank and simple to use. I don't need bells and whistles when I vape.

 

[Ruppy]

Thanks Bovinia!!! Yeah! I got a little skerred when I read in another thread where they broke the red wire. I'll wait until after the holidays and take a peek under the cap. I do not want to be buzzless over the holidays!!! Need to be able to crank those V's up during certain particular times of indulgance!

Hey buzzkill! Yep! Seems like you have a lot of experts here!!! You all will probably be hearing a lot from me! I tend to have a lot of questions.

Dam I love this thing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I did a lot of research and the BP is perfect for me! Built like a tank and simple to use. I don't need bells and whistles when I vape.

I guarantee the first time you drop it and watch it fall youll be glad you got a pro Like a timex they take a lickin and keep on tickin

 

[pizza2me]

Originally Posted by TexasT:
Put your Buzz on something like a tiny pillow to keep it from rolling. When you meter your Buzz, there's a small screw on the bottom ... stick your black probe in that screw. Put the red probe in the hole on top of the Buzz and depress the button.

If you were born with three arms, this is real easy to do. If not, you might need a friend to push the button while you hold the two probes.

Merry Christmas and Happy Holidays everyone!

I'm having trouble checking the Vs on my BP. Touching the black to the screw on the bottom, touching the red to the screw in the atty/carto hole. Pressing the button on the BP. Nothing on the meter.

What am I doing wrong?


I'm using a DT95B meter. Setting it at "V=" at 200

 

[Ruppy]

Try the ground on the screw on the side of the buzz

 

[kempo63]

I'm using a DT95B meter. Setting it at "V=" at 200

Make sure your meter is on the DC Volts (symbol with flat bars) ,not AC Volts (symbol with ~ tilde).

 

[BuzzKill]

all of the above , use a 20 volt range also , so " DC -20 volts"