I need a new delivery system.

Status
Not open for further replies.

Cptfunpants

Super Member
ECF Veteran
Jul 30, 2012
639
384
VA
So I need a new delivery system for my juice. I currently use either iClear16s or a Kanger ProTank. I'm not huge on carto tanks due to the fact all that I have tried tend to be very leaky. Any ideas? I just have no idea what to get. I don't want a vivinova, after several months they also have gotten leaky on me. I'd also like the option of being able to use any type of juice in it, Cinnamon, citrus, etc.


I didn't know where to post this. Since I'm looking for anytype of delivery system it didn't seem to fit in any one sub-forum like the atomizer, tank, and clearomizer sections.
 

bnrkwest

ECF Guru
ECF Veteran
Verified Member
Sep 6, 2011
10,873
36,891
Somewhere out there
A carto tank I use that never leaks is a polypro, I have others too that do leak but these polypros are just not leakers, they do take a carto tho. You can find them here- High Desert Vapes.com I do have Triton clearo and it does not leak as mentioned above. bnrk

here is a direct link to polypro tank- http://highdesertvapes.com/products/Poly-Pro-Tank.html

These never leak for me.
 
Last edited:

Cptfunpants

Super Member
ECF Veteran
Jul 30, 2012
639
384
VA
I know nothing will be entirely leak proof. But my NOVAs and my carto tanks are getting absurd with the amount of leakage. The carto tanks I can't even seem to vape without having to blow through to clear it and then it gets all gurgly again 7 draws later. Same goes for the novas but they also leak around the bottom threads.

Do you know the starting resistance of the triton tanks? It doesn't seem to say on the site. I saw you can get replacement coils at different OHM levels though.
 

rand4ll

Senior Member
ECF Veteran
Verified Member
Mar 1, 2013
90
43
San Antonio, Tx
Halo Triton. Haven't had a leak, don't know anyone who has. Great vapor production, top loading, no leaks. Read the reviews. Everyone has been impressed.

Do the halo tritons use a standard 510 or ego type connection? I am interested in trying them but would rather not be tied down with some less common or proprietary connection.
 

ScottP

Vaping Master
ECF Veteran
Verified Member
Apr 9, 2013
6,392
18,809
Houston, TX
I know nothing will be entirely leak proof. But my NOVAs and my carto tanks are getting absurd with the amount of leakage. ... Same goes for the novas but they also leak around the bottom threads.

Just curious but when you look at the replacement heads for your Vivi Nova do they look like the ones on the Left with the flat heads or the ones on the right with the pointy heads?
ViviNovaHeadCompare.jpg
 

ThunderPumpkin

Senior Member
ECF Veteran
Mar 24, 2013
270
379
South America
I've fallen in love with Kanger Evods.

I've tried all kinds of CEs (CE2, CE4, CE4+, CE5), and while most of them don't leak too much, they all have a very tight draw, don't provide overly much flavor, and --this is the worst-- give a fair number of burnt hits. Using them on a lanyard virtually guarantees this.

I've also tried Joyetech's e-Go T tank system (as well as the new one with replaceable heads), and it's simply wretched -- never has a vaping device produced so little flavor. Plus, you have to reload the liquid all the time. And they often leak catastrophically.

I still use some Vivi Mini Novas with metal tanks for tank cracker juices, and they're actually pretty darned good. They provide a lot of flavor. You have to be very careful not to fill them more than about 65-70% of the way up, though, or you get a huge leak out the bottom every fscking time. But that's my only complaint (okay, they're pretty inelegant, too, but I don't really care about that.)

The Evods, though, boy are they nice! Excellent flavor, to start with. No dry hits ever, thanks to the bottom-feeding design. And with exactly two exceptions, I've never had one leak on me -- they do occasionally gurgle a bit, but since the head is so far down you don't end up with liquid in your mouth or anything. (The two exceptions were catastrophic failures -- full tanks leaked most of their contents into my shirt pocket. In once case, I later realized the tank was cracked due to a forbidden juice being in there, so really, it's down to one unexplained failure, and for all I know I didn't tighten something up after filling it.)
 

Amish Ed

Super Member
ECF Veteran
Jan 25, 2010
670
467
Lake Forest, CA
amished.wordpress.com
I know nothing will be entirely leak proof. But my NOVAs and my carto tanks are getting absurd with the amount of leakage. The carto tanks I can't even seem to vape without having to blow through to clear it and then it gets all gurgly again 7 draws later.

Where are your carto tanks leaking from? Through the bottom of the carto? It sounds like you have either too many holes or they are too big. You probably already thought of this... when you blow through to clear a carto in a tank make sure the holes are clear of the juice. Otherwise you'll just cause more flooding.
 

double_aa_ron

Super Member
ECF Veteran
Verified Member
Oct 3, 2012
789
517
Austin, Texas
I know nothing will be entirely leak proof. But my NOVAs and my carto tanks are getting absurd with the amount of leakage. The carto tanks I can't even seem to vape without having to blow through to clear it and then it gets all gurgly again 7 draws later. Same goes for the novas but they also leak around the bottom threads.

Do you know the starting resistance of the triton tanks? It doesn't seem to say on the site. I saw you can get replacement coils at different OHM levels though.

I have only had one carto tank leak on me and that was because it was missing a gasket. Every other time a carto tank appeared to be leaking was user error when I was new. I didn't know how to properly prime carto or blow out a carto tank.

You should watch this video. Everything you need to know about carto tanks from punching cartos to trouble shooting leaks is in there.

 
Last edited:

alisa1970

Vaping Master
ECF Veteran
Mar 30, 2013
3,122
9,799
54
Portland, OR
I ordered some eVods and I'm digging em. Any recommendations for a juice safe delivery system? I currently have a kanger protank but it's very meh in my opinion. I like the tighter draws.

I just read in the forums somewhere that the evod heads fit perfectly in the protanks and give a bit of a tighter draw. I haven't tried it, so YMMV but you can give it a shot.
 

bazmonkey

Super Member
ECF Veteran
Jan 25, 2013
375
271
Oakland, CA
Just curious but when you look at the replacement heads for your Vivi Nova do they look like the ones on the Left with the flat heads or the ones on the right with the pointy heads?
View attachment 216561

Having both and rebuilding heads on both, I have an issue with the generic novas getting gurgly, too. Something about that head is leaky by design; it's not just the assembly because I see it in rebuilt heads, too.

I'm only chiming in because I have stuck with novas partially for the no-leak aspect and if you happen to be using the generic this whole time, the real deal might be worth another look. I don't coddle them or anything, either. It's funny you steer clear of novas because they leak, and I like them because they don't, you know? Makes me think there's something hidden going on, such as you've been using generics, or filling it too full or something odd.
 
Status
Not open for further replies.

Users who are viewing this thread