I ordered a Beast VV Box Mod from from Mr E Liquid.com

Status
Not open for further replies.

CMD-Ky

Highly Esteemed Member
ECF Veteran
Verified Member
Sep 15, 2013
5,321
42,395
KY
Roosterado, reading through this thread, I am concerned that you may not be paying adequate attention. Also, you are at some risk to merely take the advice posts here without taking the time to do some research for yourself (the blue battery or the red battery). This is no knock on any poster on this thread in any way, Sando's direction to you looks solid to me. However, there are people on here giving advice, passing out knowledge who should never advise and have no knowledge - I should know, heck, I am one of them. :toast:
 

roosterado

Super Member
ECF Veteran
May 9, 2014
714
584
willmar MN
I should have been clearer with my question to sando7. I was only able to Locate 1 Source for 26500 IMR batteries== The vender I purchased the Mod from Mr ELiquid they recommend the battery they sell the Efest 26500 IMR 3000mAh Battery which is red. Sando7 referred me to another sorce RTD who sell a Efest IMR 26500 3000mAh which is blue. As I Only use IMR batteries[MNKE -Sony-purple Efest] in my 4 Devices- 1 18650 VV- 1 Seigeli 20watt With 26650 tube-1 AR Mod 18650 and a Kamry100 telescopic. I was just wondering if anyone knew of any difference quality wise between the 2 Efest IMR 26500 3000mA,the blue 1 and the red 1. I could not find the amp limits listed for those batteries although I assume they are only 10 amp constant limit. Knowing of no difference I will order the red Efest IMR 26500 3000mAh recommended by the manufacturer of the Beast Box[ Mr ELiquid,] I thank you for your post. I am a strong believer of taking battery safety seriously for use in Electronic Cigarette Mods. Opps forgot to mention my latest Mod Fat Snow Wolf Black Rose Edition. If anyone knows of a source for a quality 26500 IMR battery with a 20 amp limit[constant] I would appreciate that information.
 
Last edited:

roosterado

Super Member
ECF Veteran
May 9, 2014
714
584
willmar MN
Thanks Yea I need button top for the Beast Box Also The Beast Box specs say the board has a 6 amp limit what does that mean in practical usage

Mr Elquid recomends not going below 1.5 ohm atomizer- I will break out the Ohm calculator as I saw in a Youtube review safe down to 1 ohm

another Spec VV 2.9 to7 volts up to 5.4V Under Load
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread