I want opinions on vaping preferences

[my4jewels]

I've been trying out a bunch of new things lately. Up until now, I have been loyal to my eGo and Boge 2.0 cartos. One thing I do know is that I like cartos. I don't like dripping, although I'm quite good at it when testing my diy flavors.

No offense, but drippers need not reply.

My question: What is your favorite vaping voltage and cartomizer combination, including resistance.
I am searching for the holy grail of great full flavor!

 

[ChipHead]

1000/1100 mah EGO battery with smoketec (1.5-1.7 reistance) dual coil cartos.

 

[WomanOfHeart]

3.7V with both single and dual coil cartos at 1.6Ω from IkenVape = vaping nirvana for me!



And I do drip...

 

[Nomoreash]

VV tuned to 4.2 - 4.5 with a 2.8 - 3.0 Clearo, my fav setup by far. I do drip occasionally when I just want a quick change or testing a new flavor.

 

[Eddie.Willers]

This is an impossible question to answer (not that it won't stop me)
Why?
YMMV!

But, FWIW, I am using an E-Power 14650 with dual-coil cartomizer at 1.5 ohms. The vape can be a little harsh if one is too greedy but otherwise I'm lovin' it!

 

[jj2]

3.7 with the CE2 clearos or dual.

 

[BiancaMontgomery]

My favorite vaping experience so far is an 18650 battery in a bottom feeder mod with either 2ohm Boges or LR Joye atty. I will also (for a change or for serious cigarette cravings) vape a 5v mod with dual coils.

 

[unmatter]

I've been trying out a bunch of new things lately. Up until now, I have been loyal to my eGo and Boge 2.0 cartos. One thing I do know is that I like cartos. I don't like dripping, although I'm quite good at it when testing my diy flavors.

No offense, but drippers need not reply.

My question: What is your favorite vaping voltage and cartomizer combination, including resistance.
I am searching for the holy grail of great full flavor!

Everybody has different tastes. Beyond that the right combination for you will also depend on the juice you use. Some do better with higher heat others do better with lower heat.

Boge makes cartos within at least 3 different ohms ranges. Since you already like Boge, why not try each range? This way you can see for yourself what resistance you prefer on the same eGo battery and you will have an idea of the power you prefer. Then to add variety you can try picking up a Riva battery that puts out a bit more power than a eGo and try that with each Boge. It's a fairly low cost method of determining which combination you prefer.

 

[APD99]

3.7v 18650 tube mods w/IKV XLR 1.5Ω Dual Coil Cartos. I lean toward sweeter juices at between 50PG/50VG and 40PG/60VG and I've found that this is the perfect combo for me for full flavor, good TH, and no burnt taste. I also use a drip tip on my cartos for easy refill (and because IMO they look nicer). Just remember that YMMV and your personal tastes trump anything anybody else can tell you.

 

[my4jewels]

Thanks, everyone so far. I realize this is all very subjective. Aside from my usual ego and 2.0's, I have 2 riva batts, a 5v passthrough that I just got yesterday, and I have also ordered the new ego VV passthrough from GotVapes. I also have an E Power 14650 and 18650 coming. And I'm looking at the ego mega dualie and the VV box mod from MadVapes.

For cartos, I have Boge 2.0's, 3.0's, echo e's. fluxomizers(2.4-2.6), Ikenvapes mega lr's, and a couple of other odds and end for cartos. Unfortunately, I had some dualies and decided not to use them on my ego, and I sold them off dirt cheap in the classified(wish I had kept them). At that time, I was pretty sure that I wouldn't be experimenting with other pv's.

I want to try lots of combinations, and just wondering what works for everyone else.

 

[BiancaMontgomery]

I actually really enjoyed my eGo with 2ohm Boges on it. It was a very nice vape. The main reason I went to mods was that in the long run, buying mod batteries was less expensive than replacing eGo batts. I didn't realize I was starting a mod buying frenzy at that time. I did a ton of buying/selling/trading and ended up where I'm at today with bottom feeders and the occassional 5v vape. It was fun for a while trying all the different mods and cartos and atty etc., then it became a serious mission to find what REALLY worked for me and I just wanted to end the searching madness. I hope you'll enjoy the journey and I hope you find what really keeps you happy. Please come back and let us know about your experiences!

 

[B4DJ1N64N]

My current favorite setup is 4.0 volt with boge 2.0, and 4.0 volt with 1.5ohm dual coil.

 

[MaxUT]

For day to day vaping, I like Ikenvape Premium Platinum cartos on my Buzz, using about 4.0 volts for fruit flavors and 4.5-5.0 volts for tobaccos. I've tried a lot of combinations and this works well for me.

 

[hairball]

Buzz Pro from notcigs.com set at 4.2V with a regular resistance 801 Fusion (Ikenvape.com) inside a Vaporescence.com's cartomizer tank.

 

[B4DJ1N64N]

@hairball: please make a review about Buzz Pro.