has it been released yet? i noticed a few people have stated they ordered it, but i can't find where they ordered it from. thank you
iclear 30b
- Thread starter rwmeade
- Start date
- th_trl_thread_readers 0
- Status
No - but I want!!
Google fu turned up this: (DISCLAIMER - I dont know squat about nor have I ever used any of these vendors)
iclear 30B Clearomizer - Ziggy's Vapes
https://www.ecigexpress.com/iclear-30b-dual-coil-clearomizer-by-innokin.html
Mountain Oak Vapors | Innokin iClear 30B - Dual Bottom Coil Clearomizer Tank
Google fu turned up this: (DISCLAIMER - I dont know squat about nor have I ever used any of these vendors)
iclear 30B Clearomizer - Ziggy's Vapes
https://www.ecigexpress.com/iclear-30b-dual-coil-clearomizer-by-innokin.html
Mountain Oak Vapors | Innokin iClear 30B - Dual Bottom Coil Clearomizer Tank
so i placed my order with mountain oak vapors, use the coupon code TUC and receive 10% off...
i ordered one last week from ziggyvapes and got an email that night saying how sorry they were they sold out and didnt catch it in time so they were sending me extra replacement heads when they came in i got an email today saying they got them it will be on its way within 24 hrs also if i remember right the 30b wont fit in the side ring of the vtr according to a vid i saw with them in it
That'll look pretty on my shiiny new MVP2. Adding it to the mental list of things I want to buy after the holidays.
I picked one up from a local B&M called vaping Sisters. (Not sure if it's on their website yet.)
The vape is fairly impressive, but I must admit the finish and appearance are not.
The black rings are hideous, in my opinion. Those rings were scratched right out of the factory-sealed package, and continue to rub off with very rough handling.
My co-worker buffed the black rings off with a brillo pad...and it's still ugly.
I'm tempted to try taking a torch to it to oxidize the polished finish, or to try using a wire wheel to give it a brushed finish...but undecided thus far.
Functionally, the coils seem to heat pretty evenly (unlike the Protank 3),the vapor is the thickest of any bottom coil I've tried (excluding the AIOS), and the coils seem to be lasting better than the Protank or the G50.
Overall, I'll keep vaping it for now, but am in no hurry to go show it off.
The vape is fairly impressive, but I must admit the finish and appearance are not.
The black rings are hideous, in my opinion. Those rings were scratched right out of the factory-sealed package, and continue to rub off with very rough handling.
My co-worker buffed the black rings off with a brillo pad...and it's still ugly.
I'm tempted to try taking a torch to it to oxidize the polished finish, or to try using a wire wheel to give it a brushed finish...but undecided thus far.
Functionally, the coils seem to heat pretty evenly (unlike the Protank 3),the vapor is the thickest of any bottom coil I've tried (excluding the AIOS), and the coils seem to be lasting better than the Protank or the G50.
Overall, I'll keep vaping it for now, but am in no hurry to go show it off.
Last edited:
Looks nice but the coils are expensive.... Looks like they can be rebuilt though.......... 
It's in stock here.....
Innokin Iclear 30B (Bottom Dual Coil) - Sun-Vapers.com
They also have replacement heads
iClear 30B replacement heads (5 Pack) - Sun-Vapers.com
Innokin Iclear 30B (Bottom Dual Coil) - Sun-Vapers.com
They also have replacement heads
iClear 30B replacement heads (5 Pack) - Sun-Vapers.com
Looks nice but the coils are expensive.... Looks like they can be rebuilt though..........
The hassle you'd endure from rebuilding the head of an iclear, is well worth the expense of buying a new one..
edit-oh, I didn't bother to look at the head of the 30b...interesting.I don't understand the "polycarbonate tank, PC fireproof material, won't crack with special juices."
Last edited:
Pretty sure the heads have been designed so that you can not rebuild them.The hassle you'd endure from rebuilding the head of an iclear, is well worth the expense of buying a new one..
Looks nice but the coils are expensive.... Looks like they can be rebuilt though..........
I'll have to see about the rebuild ability.... I rebuild my Protank and G50 heads regularly, but I'm painfully aware of Innokin's efforts, with the iClear 30 & iClear 16, to ensure they are Highly difficult to rebuild. I'm still on my original factory head. Once I have to replace it, then I'll dissect it and see what I can come up with. ;-D
I just ordered an iclear 30b today. I am excited to try it as I have heard nothing but good things about it. In regards to the aesthetics of the tank, I could personally care less about it. As long as the vape production and taste are good; I will be happy I will likely post a personal review on it since I don't see many reviews. I have been strictly a Protank and Protank 2 user thus far, but I am getting real tired of the subpar engineering of the Protanks. Oh, and I am particularly looking forward to seeing how the iclear 30b functions with my Vamo v3...
I will likely post a personal review on it since I don't see many reviews. I have been strictly a Protank and Protank 2 user thus far, but I am getting real tired of the subpar engineering of the Protanks. Oh, and I am particularly looking forward to seeing how the iclear 30b functions with my Vamo v3... Appears the heads are (in true Innokin fashion) NOT rebuildable.
The top portion is crimped, glued, welded, or in some other manner fairly permanently attached to the body of the coil head.
I was able to remove the wicks and coils through the bottom, after removing the insulator, but have been unable to find a means of removing the cap without severely mangling the whole body. Best of luck to anyone who wants to try to build coils, then lace the wicks up from the bottom and out through the holes.
If I've missed something, please share the good news.
It looks to me that this officially another Innokin coil head, which is simply NOT rebuildable through reasonable or practical means.
The good news is I can buy the coil heads locally for $2.99 each, which is FAIRLY reasonable.
The top portion is crimped, glued, welded, or in some other manner fairly permanently attached to the body of the coil head.
I was able to remove the wicks and coils through the bottom, after removing the insulator, but have been unable to find a means of removing the cap without severely mangling the whole body. Best of luck to anyone who wants to try to build coils, then lace the wicks up from the bottom and out through the holes.
If I've missed something, please share the good news.
It looks to me that this officially another Innokin coil head, which is simply NOT rebuildable through reasonable or practical means.
The good news is I can buy the coil heads locally for $2.99 each, which is FAIRLY reasonable.
Last edited:
They surprisingly have them in a store in my town so I picked one up, the black rings scratching off very easily but it vapes like a champ! Great flavor and great vapor. Probably one of the best flavors I've witnessed in a tank. One major downside is that one of my coils must have shorted on me already. ElectraVapor, the store I bought mine from, is selling the coil heads for 5$ a piece and I really don't want to spend that much on a coil head when a pack is around 13$. I would definitely recommend getting this but with a pack of coils as well
EDIT: The heads do not come apart unless you want to break it open, just to see the coils themselves. It says "replaceable heads" on the box as well
EDIT: The heads do not come apart unless you want to break it open, just to see the coils themselves. It says "replaceable heads" on the box as well
Last edited:
Well I placed an order Friday 'with Mountain Oak Vapors... For some Innokin IClear 30 B and heads
and WOW! Came in today... wasn't expecting until after
Xmax... But, a gal named Misty and US mail seen differently... many a tnx that way... for sure...
Folks... I filled one 30B up right away... and that huge dual coil is sending out VAPORS
from 50/50 Coumarin Pipe e-juice ... like large clouds in the sky... and the flavor
on the tounge... and softly exhaled out... is far more pleasant than I've known before...
And... with many a dual coils out there... only coming close to this has been
sharing such a cleoromizer result has been the Aspires BDC or the IClear 30-s
But they have not matched this type of results like the IClear 30B
Its more like a pleasant Carto on Steriods...
Last edited:
I have to say the iclear30b is the best BCC i've used to date.
i tried the protank 3 and i hate it with a passion. all my protanks leak like crazy and get dryhits (I also think the heads are terribly made and are really inconsistent)
day 3 and no leaking issues with 30b and it hits amazing.. had it up to 11 watts and dry hits..
i have to say the iclear30s is also really great.. innokin seems to finally have gotten the clearos right!
heads are really expensive but it's expected with a new product.. I paid like 12$ for a 5pack for the 30b's but oh well.. least i wont need to change it out like the protanks every 3 days
i tried the protank 3 and i hate it with a passion. all my protanks leak like crazy and get dryhits (I also think the heads are terribly made and are really inconsistent)
day 3 and no leaking issues with 30b and it hits amazing.. had it up to 11 watts and dry hits..
i have to say the iclear30s is also really great.. innokin seems to finally have gotten the clearos right!
heads are really expensive but it's expected with a new product.. I paid like 12$ for a 5pack for the 30b's but oh well.. least i wont need to change it out like the protanks every 3 days
Last edited:
- Status
Similar threads
