I received my MVP2 that came with an iclear 30 on Friday. One thing I have noticed is the draw on it is REALLY hard. Like I have to basically suck on it as hard as I can to get a decent draw on it. I don't think it has anything to do with the beauty ring because I have also tried it without the beauty ring and it really makes no difference. I am getting pretty frustrated with this thing, and I was really excited about it. I am running it between 4 and 4.2v. After smoking for 13-14 years my lung capacity isn't exactly the best either. This is really disappointing because I watched several videos on this and haven't heard many bad things about it at all and I see people blowing huge clouds with them and it's not working that well for me at all. Does anyone have any suggestions, or is this just the nature of the beast? I'm really hoping there's something simple that I am missing here. The MVP reads the ohms on it as 2.0, if that matters. Should I try to find another coil for it and see if that makes a difference? At this point I am willing to try pretty much anything.
I've also been having issues with my ismoka bcc mega. I use 50/50 juice so I usually have to remove a few wicks from the coils in order to prevent dry hits. I went to put a new coil in it today and the dry hits would not go away and I ended up having to remove so many wicks that it started flooding. So I put a used coil I had soaking in some vodka in it and if I run it much higher than 3.6v (coil measures 1.9ohm) then I get a really harsh burning taste from it. I thought the general rule of thumb was to take the ohm rating and add 2 volts and start from there. Well I am not even able to run it at 3.9 without getting nasty hits. These are the only 2 toppers I have besides an evod which I think has a cheap crappy coil because even at 4.2v it doesn't put out much vapor at all compared to when I first bought it and was running it with a standard regulated ego battery. The coil is fairly new on the evod and has only had maybe 1 tank run through it total. So basically I am having issues with all 3 of my toppers and am getting very frustrated and am not even able to enjoy the new MVP that I have been looking forward to getting for a long time. Any ideas or suggestions will be really appreciated here guys. I've been off the analogs for 8 weeks now and really don't want to end up giving in. Thanks for reading!
Sent from my DROID4 using Tapatalk
I've also been having issues with my ismoka bcc mega. I use 50/50 juice so I usually have to remove a few wicks from the coils in order to prevent dry hits. I went to put a new coil in it today and the dry hits would not go away and I ended up having to remove so many wicks that it started flooding. So I put a used coil I had soaking in some vodka in it and if I run it much higher than 3.6v (coil measures 1.9ohm) then I get a really harsh burning taste from it. I thought the general rule of thumb was to take the ohm rating and add 2 volts and start from there. Well I am not even able to run it at 3.9 without getting nasty hits. These are the only 2 toppers I have besides an evod which I think has a cheap crappy coil because even at 4.2v it doesn't put out much vapor at all compared to when I first bought it and was running it with a standard regulated ego battery. The coil is fairly new on the evod and has only had maybe 1 tank run through it total. So basically I am having issues with all 3 of my toppers and am getting very frustrated and am not even able to enjoy the new MVP that I have been looking forward to getting for a long time. Any ideas or suggestions will be really appreciated here guys. I've been off the analogs for 8 weeks now and really don't want to end up giving in. Thanks for reading!
Sent from my DROID4 using Tapatalk
