IGO W Question

[cocacola31173]

I recently got a IGO L and have been happy with it. My question is can you use single coils on the IGO W with no problem. I like the idea of having the holes in the post but did notice that it had dual airholes (I guess for when you use dual coils) Im not interested in learning dual coils right yet and was just wondering if the dual holes are ok for single coils.

Thanks!

 

[Enoch777]

Yup, for sure you can use a dual-coil post RDA for single coils. Just thread your leads through two posts and ignore the last one. Here's a pretty cheap deal for the Igo-W: IGO-W Rebuildable Dripping Atomizer

Vape well, vape often

 

[sigtausteve]

I second what Enoch said. I have an IGO-W as my main (only, lol) RDA and i run it exclusively with a single coil set up. The draw on the single coil is nice with the dual airholes. A little airy for me because i like a tighter draw, to me i get more flavorful vape that way. If any one knows a good method to temporarily plug the second hole that would be nice to know.

 

[E_DeCastro]

I have seen igo w with one hole and two holes. just buy the one with one hole. if you ever want to do dual coils, you can drill the other hole or buy the cap with dual holes.

 

[vapero]

I think everybody misunderstood the OP he is asking if having 2 airholes on the cap will affect the performance of a single coil build
just re-phrasing but I don't have the answer for you

 

[jackmormon]

They work fantastic. When you put the cap on, make sure the airholes are about 90 degrees away from the front of your coil instead of having one airhole directly in front of the coil. This is how I use it.

If it is too airy, stick a toothpick into one of the airholes and break it off so that the hole is plugged. Once some juice hits it it will swell and will be hard to notice. If you do this, make sure the unplugged airhole is directly in front of the coil.

 

[JulesXsmokr]

I run a single o.8 to 1.0 micro coil in mine..
At first the vape in stock form was too harsh for me with the 2 tiny .8mm holes
I drilled one hole to 1.5 mm. or 1/8th inch. with my drill press and a cobalt bit..
I crazy glued the opposite hole shut..
My vape is much much better, and doesn't burn my taste buds, unless I running low on juice..
I can always unplug the other hole later if needed for a dual coil..

 

[TastyKakes]

I run a single o.8 to 1.0 micro coil in mine..
At first the vape in stock form was too harsh for me with the 2 tiny .8mm holes
I drilled one hole to 1.5 mm. or 1/8th inch. with my drill press and a cobalt bit..
I crazy glued the opposite hole shut..
My vape is much much better, and doesn't burn my taste buds, unless I running low on juice..
I can always unplug the other hole later if needed for a dual coil..

Totally off topic, but crazy glue is not something I would want to be heating up and inhaling any possible fumes of on a regular basis. You may want to find an alternative plug material before you do serious upper respiratory damage - this coming from an almost 20 year PAD smoker.

 

[zhentipede]

i just covered it with one of those label maker things with my initials lol...

 

[MrStik]

i do single micro coils on all my atomizers and they all have 2 large holes