I'm back people!

[treehead]

Hey guys I've been an ECF member for nearly a decade now, and I'm just going to give you guys the important details.
-Don't vape the pre-made "atomizers", they pretty much suck.
-Don't vape the tank filled caromizers, they also suck.
-DO start vaping with RDA'S (Rebuildable Dripping Atomizers.)

There's TONS of youtube tutorials on how to vape with an RDA, and it's the best option, HANDS DOWN...I'm currently vaping a perfect RDA with .03 ohms, and it's INSTANT cloud chasing and/or satisfaction. It may take you a while to get here but trust me, it's vaping nirvana)

It's very thick gauge Nichrome, and about 8-10 wraps for BOTH, I'll let you pros figure out the gauge. Trust me, one or four won't cut it, it has to be 2 of .08 ohms or lower, honestly .05 is a little slow, and .03 is a little fast for the heat up. Just trust me.

 

[mattiem]

3 years does not a decade make but Welcome back. I'm happy that you found what works for you. Isn't it great that there is something that just plain works, for everyone.

 

[WillyZee]

congrats on finding your way back treehead ... IMO, dripping burns through juice to the point of waste.

however, I'm not a professional vaper ... I'm just staying off the smokes.

 

[wheelie]

BUT BUT I am a tank guy !!!!!! Ammit and Merlin are doing me wonders. If I want a hot vape I have Griffin 25 Plus and Smok TF-RDTA for duel coils.

 

[Eskie]

A 0.03 ohm coil?? And how are you powering it?

 

[Whiskeywarrior]

What are you using that build on? The g2, slice? Hopefully not a mech.

 

[Alien Traveler]

-DO start vaping with RDA'S (Rebuildable Dripping Atomizers.)

Drippers? Yuck.
I am glad they work for you. But be careful giving an advice.

 

[Zutankhamun]

I'll add to this. I used a dripper last night for the first time in a long while.
Ugh!

It's all about tanks.
Mtl vaping on a lite and a mech @ 1.2 just like this

Don't worry, the cat/I took the battery out before she fell asleep.

If you vape any other way, you are wasting your and my time.

Obviously joking, each to his own.
Happy your back but your post is a tad on the aggressive side. I don't care for dos and don't lists.

 

[Rule62]

Squonking...even better than dripping. At least it is for me. It has all the advantages of dripping, but more convenient. But, to each their own.

 

[zoiDman]

Hey guys I've been an ECF member for nearly a decade now, and I'm just going to give you guys the important details.
-Don't vape the pre-made "atomizers", they pretty much suck.
-Don't vape the tank filled caromizers, they also suck.
-DO start vaping with RDA'S (Rebuildable Dripping Atomizers.)

There's TONS of youtube tutorials on how to vape with an RDA, and it's the best option, HANDS DOWN...I'm currently vaping a perfect RDA with .03 ohms, and it's INSTANT cloud chasing and/or satisfaction. It may take you a while to get here but trust me, it's vaping nirvana)

It's very thick gauge Nichrome, and about 8-10 wraps for BOTH, I'll let you pros figure out the gauge. Trust me, one or four won't cut it, it has to be 2 of .08 ohms or lower, honestly .05 is a little slow, and .03 is a little fast for the heat up. Just trust me.

Hi treehead. Glad you found something that works for you.

Just remember though, what Works for One Person doesn't always work for Another. Because rarely is Everyone seeking the Exact Same Thing.

BTW - Those are some Very Low Ohm Builds that you listed. What type of Mod do you use to Drive them?

 

[Rule62]

Sorry, but I never would recommend anyone build RDAs at .03 - .05 ohms.
Pretty dangerous territory.

 

[ckquatt]

Hey guys I've been an ECF member for nearly a decade now, and I'm just going to give you guys the important details.
-Don't vape the pre-made "atomizers", they pretty much suck.
-Don't vape the tank filled caromizers, they also suck.
-DO start vaping with RDA'S (Rebuildable Dripping Atomizers.)

There's TONS of youtube tutorials on how to vape with an RDA, and it's the best option, HANDS DOWN...I'm currently vaping a perfect RDA with .03 ohms, and it's INSTANT cloud chasing and/or satisfaction. It may take you a while to get here but trust me, it's vaping nirvana)

It's very thick gauge Nichrome, and about 8-10 wraps for BOTH, I'll let you pros figure out the gauge. Trust me, one or four won't cut it, it has to be 2 of .08 ohms or lower, honestly .05 is a little slow, and .03 is a little fast for the heat up. Just trust me.

Man!!! To think, I've been vaping the wrong way all this time! Guess I'll throw all my Billet Boxes and IBTankeds in the trash and start over...

Thanks for letting me know what my problem was.

 

[Mazinny]

Hey guys I've been an ECF member for nearly a decade now, and I'm just going to give you guys the important details.
-Don't vape the pre-made "atomizers", they pretty much suck.
-Don't vape the tank filled caromizers, they also suck.
-DO start vaping with RDA'S (Rebuildable Dripping Atomizers.)

There's TONS of youtube tutorials on how to vape with an RDA, and it's the best option, HANDS DOWN...I'm currently vaping a perfect RDA with .03 ohms, and it's INSTANT cloud chasing and/or satisfaction. It may take you a while to get here but trust me, it's vaping nirvana)

It's very thick gauge Nichrome, and about 8-10 wraps for BOTH, I'll let you pros figure out the gauge. Trust me, one or four won't cut it, it has to be 2 of .08 ohms or lower, honestly .05 is a little slow, and .03 is a little fast for the heat up. Just trust me.

Wow, thanks for coming back with such brilliant groundbreaking info ! All of ECF was patiently waiting for your return. We all felt we were doing something wrong, but couldn't pinpoint what ... well until now ! As i type, there are thousands ordering RDA's and " very thick gauge " Nichrome, while checking out Youtube tutorials, in anticipation of vaping Nirvana !!

Thanks again

 

[pfaber11]

Thanks treehead for pointing me in the right direction.

 

[Zutankhamun]

BTW - Those are some Very Low Ohm Builds that you listed. What type of Mod do you use to Drive them?

Hi. I don't use anything but kanthal and never tc but I've seen videos where ppl are vaping 0.15 coils so is that a tc build he's talking 'bout?
I don't know, just wondered if that is what nichrome is used for??

Have no idea how low you can go with them. Is his build still far too low?

 

[Topwater Elvis]

I had a detailed response typed out,,, then re thought it.
If you start a thread like this you're most likley looking for an argument, or to further the myth of pulse battery ratings.

4.2v / .03Ω = 140a
3.7v /.0 3Ω = 123a
3.2v / .03 = 106a
3v / .03 = 100
2.8v / .03 = 93a

You'd need a bunch of true 30a CDR cells in parallel to get near the amp demand in a safe / sane manner.
Or, a multiple battery regulated power device capable of firing NiCr wire at .03Ω.

Very dangerous "advice" without very specific details and very extensive experience.

 

[MMW]

I hope you're using trustfire chargers and efest batteries with builds that low. Safety 1st.

















(Never use either of those)

 

[Zutankhamun]

I had a detailed response typed out,,, then re thought it.
If you start a thread like this you're most likley looking for an argument, or to further the myth of pulse battery ratings.

4.2v / .03Ω = 140a
3.7v /.0 3Ω = 123a
3.2v / .03 = 106a
3v / .03 = 100
2.8v / .03 = 93a

You'd need a bunch of true 30a CDR cells in parallel to get near the amp demand in a safe / sane manner.
Or, a multiple battery regulated power device capable of firing NiCr wire at .03Ω.

Very dangerous "advice" without very specific details and very extensive experience.

Thanks

 

[daviedog]

I like Drippers & RTAs, why limit my Pleasure options?
.05 ohms, .03? No pleasure there..

 

[daviedog]

Hi. I don't use anything but kanthal and never tc but I've seen videos where ppl are vaping 0.15 coils so is that a tc build he's talking 'bout?
I don't know, just wondered if that is what nichrome is used for??

Have no idea how low you can go with them. Is his build still far too low?

Absolutely..