Im new and i need some help!

[ChasingTheCloud]

Just want to know which coil is good for the uwell Crown tank? No temperature control. For the rba.

 

[Katmar]

Welcome to the forum. Someone should be along to help you out!!! Good luck...

 

[Elizabeth Baldwin]

Just want to know which coil is good for the UWell Crown Tank? No temperature control. For the RBA.

If you are using the RBA base then it's dependent on what you want. Most people use Kanthal. I usually build mine at .5 ohms.

Is that what you were asking? If not, can you be a little more specific?

 

[ChasingTheCloud]

If you are using the RBA base then it's dependent on what you want. Most people use Kanthal. I usually build mine at .5 ohms.

Is that what you were asking? If not, can you be a little more specific?

yes im asking that, and is clapton coil good for the Crown?

 

[Sir2fyablyNutz]

Kanthal. You should use and bookmark this Steam Engine to determine how to wrap it, dependent on wire size.

Coil wrapping | Steam Engine | free vaping calculators 6 wraps of 24 awg Kanthal around a 2.5 mm to .5 ohms (change any variable)

 

[ChasingTheCloud]

Kanthal. You should use and bookmark this Steam Engine to determine how to wrap it, dependent on wire size.

Coil wrapping | Steam Engine | free vaping calculators 6 wraps of 24 awg Kanthal around a 2.5 mm to .5 ohms (change any variable)

thankyou! what about 26 awg, how many wraps?

 

[Sir2fyablyNutz]

thankyou! what about 26 awg, how many wraps?

go to the same link...where it says 24 awg...change it to 26 awg... you can change the wire type (not recommended), wire size (awg), inner diameter (2.5) higher or lower depending on what you have to wrap around in US or metric, leg length (changes resistance a little, not important unless you have long legs...the wire from the coil to the screws), and target resistance (set on .5 ohms, build to whatever but I'd suggest at least 4 wraps for flavor and vapor production minimum).

After changing a number somewhere, click on an open spot and the calculator should update if it doesn't change immediately.

 

[ChasingTheCloud]

go to the same link...where it says 24 awg...change it to 26 awg... you can change the wire type (not recommended), wire size (awg), inner diameter (2.5) higher or lower depending on what you have to wrap around in US or metric, leg length (changes resistance a little, not important unless you have long legs...the wire from the coil to the screws), and target resistance (set on .5 ohms, build to whatever but I'd suggest at least 4 wraps for flavor and vapor production minimum).

After changing a number somewhere, click on an open spot and the calculator should update if it doesn't change immediately.

Appreciate your help!

 

[Two_Bears]

Just want to know which coil is good for the UWell Crown Tank? No temperature control. For the RBA.

I use 26 gauge Kanthal. 2 mm internal diameter, and 8 wraps to give me
75-.85 ohms

 

[Tommy-Chi]

Kanthal. You should use and bookmark this Steam Engine to determine how to wrap it, dependent on wire size.

Coil wrapping | Steam Engine | free vaping calculators 6 wraps of 24 awg Kanthal around a 2.5 mm to .5 ohms (change any variable)

Thank you for the link!