I'm new to Vaping and spending my money wisely

[Kgb424]

And today, I just got my DNA30 chips, now I'm waiting for my Hana DNA20 mods, from fasttech, and I'm learning that having to wait two weeks or longer before they ship, then another two weeks to a month for shipping, really sucks, but I did save some money, by getting the DNA20 mods for the cases and the buttons, and charger, and now I got the DNA30 chips reasonable under $80 apiece with shipping

 

[Kgb424]

too answer Timuswins, I buy juice at a local Vapor Supply store close to me, they have a juice bar for tasting and they carry there own line called Nevada Vapor Supply, and they carry Namber Juice, and Velvet Cloud, and DNA and the other place in town sell Grand Vapors, Orphan Tears, Orphan Blood, and S&M's Asian Porn, and they did carry Devils juice but never got to try them, cause it was before the change vendors, now the second place is going under, they never have juice in stock and it takes months for them to restock, So I'm really thinking of buying some Nicotine in PG and VG, and some PG and VG and some flavors in PG and then later on try some Vg flavoring, cause it takes me awhile Vape the contents of two Kayfuns 3.1's and I'm not a constant dripper, yet so my juice lasts me a couple of weeks to a couple of months, cause I get tired of the same juice day in and day out and like to switch it up daily.

 

[Kgb424]

I got my new 1amp Chargers, for my DNA mods, these charge twice as fast as the Evolve 500 ma amp chargers. and I found a site the sells tactical buttons for the up and down adjustments and fire buttons, and 18650 battery holders. so when I switch out the DNA20's from the aluminum cases, and put in the DNA30 chips, I'm going to build two of DNA20's in altoids tins, or in some kind of case. just waiting for Fasttech to fill order and send my DNA20's. This way I will have two DNA30's that are really nice, and two DNA20's that I built. Cause I been wanting to build something Vapor related for while now.

 

[Kgb424]

ok I got my battery holders and 510 connectors, that will not work, and fire buttons and only one set of tactical buttons, so I ordered two more tactical buttons and ordered better sealed 510 connectors that have a lock ring so it does twist and break like my ohm meter with 510 connector did, I now use it as a building base.

 

[Kgb424]

I'm replacing both of my made in a Chinese sweat shop by 12 years olds clones. For non-clone made in America RDA's like the Spirit that I found on here in the classifieds. And bought it from a very nice lady. The top cap of a Patriot will fit a Spirit and I see that the Halo top cap with air adjustments and quick Coil access for dripping, will fit a Patriot and a I-GO W, W3,W5. I might get a Halo top cap for my new to me Spirit RDA here as picture of one from the internet.

 

[ronchinoy]

Why not just go with a CC / CV board for charging.
Im still looking for a place other than Fasttech where I can buy 510+Evod connectors for my DIY MOD.
It would help if you listed where you got your stuff from.
Also Im not sure which one to get the Russian or the Kfun or are they both one and the same. ?

 

[Kgb424]

I don't know about the Russian, I got my first Kayfun from a friend of the owners, where I buy my juice at locally, and liked it, so I looked around and found the second one, they both match. I'm not sure what a CC / CV board is, I bought two Hana DNA20's and then bought DNA30 chips, so I can switch them out, and build two mods. the 1amp chargers will cut the charging time in half, plus fit in the Hana case and an Altoids tin.

 

[Kgb424]

ok I bought a second RDA's, it not made in America, its made in the Philippines, and my fiancé' lives in the there, so now I can tease her about it, saying it was made by one her cousins. Its not a clone it is a used authentic Nimbus RDA, got a good deal on here for it.

 

[GPC2012]

For hardware I have 2 I normally use
Desert Vapes and Vapor beast
For juice
Bionic

 

[Kgb424]

ok I was asked to list where I found my parts at

Fasttech authentic Hana DNA20 Mods

Derb E Cig authentic DNA30 Chips

A to Z Vapor World tactical buttons, fire buttons, battery holders, wrong 510 connectors

Extra sets of insulators for the Kayfun's


High Desert Ecigs sealed 510 connectors with lock ring, no twisting the right connectors


JCMS Vapes LLC 1 amp Micro USB charger boards for DNA20 and DNA30's mods 1/2 the time to charge

Kidney Puncher Kanthal wire I bought 30, 28, 26, 24 gauge for different coil setups

EVcigarettes my second Kayfun 3.1 clone with Matte finish to match my first one

Ebay Nemesis Mod Clones

Ebay Nemesis Mod Magnet kits for the switches of the Nemesis Mods

Ebay Sony 18650 30 amps 2600 MAH VTC5's two sets

Ebay 2 18650 battery chargers

Ebay Helios Clone

Ebay Trident Clone

ECF forums Nimbus RDA

ECF forums Spirit RDA

EVcigarettes Replacement Insulators for Kayfun's they have the Base Insulator, Insulator Square, Insulator Ring

Kidney Puncher Replacement Insulator for Kayfun's they have the Base Insulator, Insulator Square and no insulator ring

Ebay 6 30ml glass bottles with glass drippers for DIY juice in the near future as I Vape thru the juice selection I got now

there is probably more, but I cant find all of the saved e-mail receipts

 

[Kgb424]

hey Gpc 2012 what flavors have you tried of the Bionic juice cause they is about 7 of them that sound pretty damn good I see you can get a six bottle sample pack but I got enough juice now, that needs to Vaped, I got a lot I like, but haven't found a Vape all day favorite yet, I change it up for now. so when I do find a favorite, maybe it can be made DIY and make my own.

 

[alsmom]

wow, if i had that much money to spend, I probably would have gotten a therapist, or a hypnotist. or really good sex to get me off cigarettes vape on!!

 

[LeftCatcher]

I would opt to be a little more circumspect in public these days given the negative perception e-cigarettes are generating in the media and in local/state/federal governments. This perception does filter down to the general public. Just something to consider in the future.

NO! i tell people the same thing when they ask me if i have to have my gun with me, and can i leave it at home, or in the car. making considerations like that is just like saying "i'm sorry" at the scene of an accident, you assign or assume blame/guilt.
give them an inch and they'll take a mile.
you've done nothing wrong, and the law currently sees it that way, don't give them an out to assign blame, and legislate your freedom to vape away.

 

[Kgb424]

It really wasn't that much the money, the first RDA's were clones, and now are garbage were less than $60 for both, I bought two used Authentic RDA's for $65, the Nemesis clones were $50 for both, the DNA20 Hana mods were $106 with shipping and reinforced shipping boxes, the DNA30 chips cost me $130 with shipping, the Kayfun was less $40 on Memorial Day at 20% off. the Sony 18650's were $30 for two sets, the Chargers were 45 with shipping.

maybe $600 in hardware and with tools, torches, wire, juices, drip tips, and what not.

Maybe $800 in 5 months, I used to spend more than on Herb and booze and loose women and gambling I do live in Nevada its a 24hour state baby, I have cut way down on the booze and the loose women and quit gambling , but the Herb, some days its the only way I can tolerate you little #####

but seriously I met Anteth my Fiancé and she is beautiful and loves me very much and makes me behave my self, she don't care how much of my money I spend as long as I stay out of trouble, its all good.

 

[Kgb424]

These are pictures of my Fiancé Anteth, she is a beautiful Filipina, and it breaks my heart she lives in the Philippines, and is watching over her elderly parents, in our hearts were together forever, its just a matter of time, until we get married. she was in a coma for almost three months from a virus infection and she survived Typhoon Yolanda, where she watched people die as she trying to save them, people she didn't know, she was almost killed herself helping out in her neighborhood , she is a fighter, and is hardheaded and don't take no #### and calls me on mine, that's why I love her so much and going to make her my wife someday.

 

[Kgb424]

Screw FastTech they ...... me off, I ordered two Hana DNA20 and waited two weeks, no-email or updates, had to go to the site, to find out there re-stocking which means another two weeks, and then another month for shipping and there support is waste of your time I cancelled my order lets see how that takes before they piss me off again. now I'm looking for DNA30 mods, screw Fasttech never again will I waste my time on them.

 

[Kgb424]

Update I got my authentic Nimbus RDA and my authentic Spirit RDA and on a impulse buy for less then $45 I got a Patriot Clone and another Nemesis clone, there coming in the mail. and I bought a replacement base for my Trident clone, cause I broke the center post, and I drilled the top cap holes to 1/8'', and going to go very low ohm in it and see what happens.

ordered some 20 gauge wire for the DNA mods on E-bay and some good sealed 22mm 510 base connectors from FatDaddyVapes. now looking for the display cradles for the altoid tins. and some fuses for them

just ordered two Cloupor DNA30 Mod clones, for less than $150 and there in stock now, no waiting and two day regular shipping, and bought two more Sony VTC5's

just got my refund from Fasttech, that's good cause it went towards the DNA30 clones, never should of wasted my time with Fasttech, I learned my lesson and never again will order from them

 

[Kgb424]

The Three Amigo's my Patriot and Nimbus and Spirit and my three Nemesis mods, my Cloupor mods have been shipped and my Kayfun Nano kits and finally found the sealed 510 base connectors, I wanted there 22mm, they look like a top to a mechanical mod, will post pics when I get them, still looking for one case to go dual batteries for one of them, and a single battery one for a stealth mod in a Altoids tin or something close to it and I found a Trident clone replacement base for $9.00 that included shipping yeah baby, broke the center post in the other Trident base and lost two screw caps and drilled out the holes in the top cap to 1/8'' going to build a 24 gauge .02 sleeper coil build, and got some Open Source 100% VG Crunch Berry Lemon juice and Some Peppermint Mocha juice that are 6 mg from a nice person on here.

 

[Kgb424]

Not my pictures but here is the Open Source 100% VG, Peppermint Mocha and Crunch Berry Lemon , from the pictures looks like they both have a 1 1/2 additional flavor shots.

Crunch Berry Lemon## Strawberry, Blue Berry, Vanilla, lemon

Peppermint Mocha## Peppermint, Chocolate, Vanilla, Coffee, Carmel

 

[Kgb424]

I bought some juices on here, and I got the following in 6 mg and most of them are short of 30ml. And are all VG or high content of VG. and most of have only a little out of them from previse owner.

Betelguese Juice## Raspberry, Mango, Pineapple, Strawberry

Nice Melons## Watermelon

Bronsen's Milk## Crème with hints of Strawberry

Moo Juice## Strawberries and Crème

Ecto Plasm## Hi-C Ecto Cooler

The Edge##Cherry, Raspberry, Strawberry

Gummy Blood##Candy and Fruit