im stumpped (ego-c)

[Riffy]

You also might check to see if the whole in the bottom of the cone isn't clogged. There is a tiny hole that air goes threw in the center of the cone, you should be able to see light threw it. With out a head in it, that is. It's that first piece on the left that has the hole, and that's normally inside the 2nd piece. I've had them get clogged before and stuck a sewing needle threw it to clear it.

Here's a picture of the 2 pieces I take out of the tank in the picture under the cone pieces. Right of the tank.

 

[Maestro]

Not trying to nitpick here, just getting the terminology straight so we're all talking the same thing. The cone and the base are two different pieces. That's why I got confused when someone mentioned that the cone was causing a tight draw. Now it makes sense.

 

[Riffy]

That's why I figured pictures were easier. Silly thing has to many parts!

 

[kilascay]

My type b should be in tomorrow hopefully.. I'll let everyone know the results

Sent from my cm_tenderloin using Tapatalk

 

[Kent C]

Try not fully seating your tank - leave a fingernail of space betweeen the top of the atty body and the ridge on the tank.

 

[kilascay]

Thanks I tried that still no go.. got my type b today and everything is working well.. still can't figure out what happens to my type a

Sent from my HTC_Amaze_4G using Tapatalk

 

[Riffy]

Odd...

I love my B! I mostly only use the B since I got it. Anyways at least this one is working for you.

 

[O-Man]

Sometimes liquid gets to the battery connections and they dry a residue on them. I use an q-tip with alcohol and clean all the connectors (threads too while I'm at it). It seems to make a fairly large difference if it's been a while.

 

[Kent C]

Thanks I tried that still no go.. got my type b today and everything is working well.. still can't figure out what happens to my type a

Sent from my HTC_Amaze_4G using Tapatalk

Glad you're up and running - must have gotten 'one of those' ... it happens.

 

[Kent C]

Sometimes liquid gets to the battery connections and they dry a residue on them. I use an q-tip with alcohol and clean all the connectors (threads too while I'm at it). It seems to make a fairly large difference if it's been a while.

I do this (without the IPA - although I do that weekly) every time I charge a battery - and hit the charger post too.