Impressed with the iPV 4S

Status
Not open for further replies.

thailand

Senior Member
ECF Veteran
Verified Member
Feb 15, 2014
232
129
Philadelphia, PA
Like the title states, I am really digging the iPV 4S.

I was online, and the choice came down to the Sigelei 150 TC, and the iPV4S. The Sig was about 25 bucks more, and I know they have a great rep, but I like the look of the Ipv4S more.
After all the research, and my own personal preference, I chose the iPV4S.

Its a solid device. Currently running the Royal Hunter RDA @ 0.3 ohms, max VG juice, at 60 watts. GREAT flavor, and really dense cloud production.

And, as frivolous as it sounds, the grip has a near rubber-like texture, that makes it feel great in your hand. Huge plus for me! It also raises the ceiling since I can go to a higher wattage than my subox, and i can start experimenting with Ni and Ti coils.

Well, thats my little rant, haha. I'm sure I'll have many follow-up questions for you expert vapers about Ti coil and new builds I can try now since I have a capable device!

 

kbeam418

Super Member
ECF Veteran
Mar 5, 2015
784
1,422
Toledo,Oh
Like the title states, I am really digging the iPV 4S.

I was online, and the choice came down to the Sigelei 150 TC, and the iPV4S. The Sig was about 25 bucks more, and I know they have a great rep, but I like the look of the Ipv4S more.
After all the research, and my own personal preference, I chose the iPV4S.

Its a solid device. Currently running the Royal Hunter RDA @ 0.3 ohms, max VG juice, at 60 watts. GREAT flavor, and really dense cloud production.

And, as frivolous as it sounds, the grip has a near rubber-like texture, that makes it feel great in your hand. Huge plus for me! It also raises the ceiling since I can go to a higher wattage than my Subox, and i can start experimenting with Ni and Ti coils.

Well, thats my little rant, haha. I'm sure I'll have many follow-up questions for you expert vapers about Ti coil and new builds I can try now since I have a capable device!



I have the Ipv4 (pretty much identical except mine has a charging port) and absolute love it! I would suggest the Smok TCT if you want to try temp control out, works fantastic with the ipv4. What batteries are you using?
 

thailand

Senior Member
ECF Veteran
Verified Member
Feb 15, 2014
232
129
Philadelphia, PA
Loving this great mod too! I find that I love to work around TC with Ti coils. Have not much luck with Ni.

A dual Ti 28g12 wraps 3mm id gave me around 0.54 ohm at room temp in my magma v2. Lock it down and running at 35 joules at 360f.

Clouds everywhere. Vape on!

Nice. I do like the idea of Ti coils. I'd like to see if I can find a good RBA that utilizes dual Ti coils for massive dense clouds!
 

kbeam418

Super Member
ECF Veteran
Mar 5, 2015
784
1,422
Toledo,Oh
I check the Smok TCT out. Thanks for the suggestion!

As far as the batteries, I'm using the standard Samsung 25Rs right now. Been vaping on it for about 8 hours, and still have about 90% battery left. Not bad on battery life at all!

It's a dual battery mod so battery life will be good. Even in series you get about 1.5 capacity because the voltage is getting stepped down. Takes me about 20 ml to get to %50.
 

Stinkytofus

Ultra Member
ECF Veteran
Verified Member
Jul 30, 2014
1,356
631
New York City
Like the title states, I am really digging the iPV 4S.

I was online, and the choice came down to the Sigelei 150 TC, and the iPV4S. The Sig was about 25 bucks more, and I know they have a great rep, but I like the look of the Ipv4S more.
After all the research, and my own personal preference, I chose the iPV4S.

Its a solid device. Currently running the Royal Hunter RDA @ 0.3 ohms, max VG juice, at 60 watts. GREAT flavor, and really dense cloud production.

And, as frivolous as it sounds, the grip has a near rubber-like texture, that makes it feel great in your hand. Huge plus for me! It also raises the ceiling since I can go to a higher wattage than my Subox, and i can start experimenting with Ni and Ti coils.

Well, thats my little rant, haha. I'm sure I'll have many follow-up questions for you expert vapers about Ti coil and new builds I can try now since I have a capable device!

smok TFV4 would look nice on that too

dont forget a silicone case or wrap, this thing scratches very easy !
 

thailand

Senior Member
ECF Veteran
Verified Member
Feb 15, 2014
232
129
Philadelphia, PA
Yes, I too am digging on my IPV4s. It's a beast for sure. I'm using the Uwell Crown on top with RBA coiled with Titanium. Love It.....

I was checking out the Uwell too. Does it come with an RBA that you build yourself, or the replaceable coils? I'm looking it up now to see.
 
  • Like
Reactions: ringling

ringling

Unresolved Status
Aug 19, 2015
128
132
Does it come with an RBA that you build yourself, or the replaceable coils?
As far as I know there is not a kit that includes the RBA. I had to purchase it separately. It's not too expensive. My kit came with two extra coils and a extra glass. All sitting in the box unused. Didn't even use the coil that came with it. Coiled the RBA (.25 Ohm Ti) and have been TCing ever since...
 

ringling

Unresolved Status
Aug 19, 2015
128
132
Just saw on the vendor site that they do have an RBA...i think this will be my next purchase.
I think you'll love it if you do. There's a lot of people raving about the TFV4 but I was disappointed. They really did a screwy job with the gasket for the glass. I am unable to put the thing back together after taking it apart to check out. I'm told with juice in it it's not a problem anymore. I made the mistake of buying the single kit so have to buy the RBA separate. Definitely will not juice it up till I'm actually really to use it. I personally think that sucks how they did the gasket and glass.....
 

Matty316

Super Member
ECF Veteran
Mar 29, 2014
370
443
Hull, England
The screen on my sxk vapor flask just died so I'm thinking of getting the IPV4s. can anyone recommend a good seller that ships to the UK? I normally buy from fasttech but I've been losing faith in them latley as most of the stuff I've been getting from them has been defective or damaged in some way latley. It's beginning to make me feel like their prices are so low because the are selling factory seconds or something.
 

GeorgeS

Ultra Member
ECF Veteran
  • May 31, 2015
    2,321
    3,609
    Oregon, USA
    I was at a local B&M and held the SIG150TC, IPV3Livr and IPV4S in my hand and ended up purchasing the IPV4S.

    The IPV4S still feels good in my hand and on a set of LG HG2's is the only mod I own that will actually last me a full day (and then some!) of vaping.

    This is what I was hoping for so I'm very pleased.
     
    • Like
    Reactions: ringling

    thailand

    Senior Member
    ECF Veteran
    Verified Member
    Feb 15, 2014
    232
    129
    Philadelphia, PA
    I was at a local B&M and held the SIG150TC, IPV3Livr and IPV4S in my hand and ended up purchasing the IPV4S.

    The IPV4S still feels good in my hand and on a set of LG HG2's is the only mod I own that will actually last me a full day (and then some!) of vaping.

    This is what I was hoping for so I'm very pleased.
    That's what made me choose it too. That rubber like grip sealed the deal for me! Battery life is off the charts also.
     
    • Like
    Reactions: ringling
    Status
    Not open for further replies.

    Users who are viewing this thread