in need of help with my Tesla VIII
- Thread starter candi0587
- Start date
- th_trl_thread_readers 0
- Status
It read low resistance once I took the tank off and put it back on and now my mod won't work not sure what's wrong....
okay.... so take the tank off -- leave it off -- and press the fire button -- what does the screen show?
510 center pin short? Tank coil shorted? or mod bad? Do you have another tank to try on it or another coil for that tank?
I have tried a different tank and a different coil. Hope it's not a bad mod because it was working perfectly fine less than 2 hours ago.
well no atomizer with nothing attached is a good sign -- that means the short / low resistance is in your atty -- couple things to try -- clean the threads of the mod and the tanbks with rubbing alcohol -- make sure there is no juice in the hole.. then try again -- still says short -- try loosening the tank a little bit and try again...
Ok ty so much I am going to try that now as we speak and keeping fingers crossed that it works
Battery weak/run down?
If the battery is too run down to supply the requested wattage for the coil resistance....
This might be your message...
If the battery is too run down to supply the requested wattage for the coil resistance....
This might be your message...
It reads a full battery and still having problems with it I done the alcohol thing and tried loosing the tank.
Not sounding good then. Tried different tanks, cleaned contacts, battery charged... Have you removed the battery and let it sit a minute and replaced the battery? Perhaps it needs a CTL/ALT/DEL. I am out of ideas.
hmmm hold it a bit longer or try the - instead -- it should show the Ohms with a little omega symbol after the number?
well... thats not a short -- or low resistance... hmmm if it says 1.8 and will not fire on multiple attys it doesn't look good for your mod 
That's what I was afraid of. So I guess my only option now is to go buy another new mod.
- Status
Similar threads
