Inexpensive Box Mod 30w

Status
Not open for further replies.

vapomike

Super Member
ECF Veteran
Sep 23, 2009
392
149
Hickory, NC (USA)
I'm looking for something to run 1.6-1.8 coils at about 15-20w reliably. I would prefer something with a 10w buffer because I don't like running things maxed or nearly maxed out. I was really psyched about the istick, but imo they use the term regulated very loosely. From the reviews and hearing from owners it does a very poor job of actually regulating voltage due to using mean and not rms. If it would properly regulate I'd probably get one. Anywho is there any box mods that provide proper regulation at least at the level the MVP2 does and go up to 30w? I would like to spend under 80 dollars so I'm not expecting dna quality, but something superior to the istick. I feel like I may be stuck waiting on the rumored cheaper 30w MVP 3 possibly due out around Christmas.
 

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
e-lvt2

Details:

•Quick click the power button for 3 times to turn ON/OFF
•Variable wattage - can be adjustable from 7.0W to 30.0W (in 0.1W increments)
•Check battery level, output voltage, resistance and wattage
•Low battery, low resistance and short-circuit warning
•Voltage indicator: Less than 3.6V (red), 3.6-3.75V (yellow), Over 3.75V (green)
•Locking function for "+" &"-" buttons
•The maximum time for inhale once is 10 seconds
•Power supply: you can recharge the mod with attached USB cable, or you can take out the 18650 battery to charge
•Charging indicator: The LED indicator is ON when charging, and turns off automatically after fully charged
•510/eGo threaded connector
•Brass contact
•Powered by single 18650 battery (battery sold separately)
•Can be used as a mobile power bank
•With LED flashlight
•Water-resistant, shock-resistant and dust-proof
•Low resistance and short circuit warning
•Atomizer recommend: 0.3-1.0ohm for 15-30W, 1.0-3.0ohm for 7-15W

it vw only though.
 
Status
Not open for further replies.

Users who are viewing this thread