You need to give Switched a call next time you need machine work done. He's pretty fast.
I think Mike meant 4.75" long and 0.5" across or diameter.
Last edited:
Infinity Pro release...
- Thread starter ipetbumblebees
- Start date
- th_trl_thread_readers 0
- Status
You need to give Switched a call next time you need machine work done. He's pretty fast.
I think Mike meant 4.75" long and 0.5" across or diameter.
To answer all of those questions, yes. You will however get less vape time with LR.
Wow that's 14.7+ watts. What do you want to do fry eggs? I hope the protection circuit on mine does it's job and shuts off at almost 15 watts.
If it shuts at 15 w it's pretty ok for me.
But I really want a variable voltage unit not one that shuts because is above 4v with a LR.
Besides generally it happens something like this 4.2*4.2/1.7=10.3w
I think this was one of the minus about old Infinity (and definitely a problem with the povari)
Anyway '1.5' DC's rock at 4.2/4.5.
But I really want a variable voltage unit not one that shuts because is above 4v with a LR.
Besides generally it happens something like this 4.2*4.2/1.7=10.3w
I think this was one of the minus about old Infinity (and definitely a problem with the povari)
Anyway '1.5' DC's rock at 4.2/4.5.
From what I have tested and others have used they go to about 4.7volts on a 1.5 ohm DC so it should be fine.
Here's some of the testing data I did with LR. The times will be different for everyone because we all vape differently. Some faster, some slower. But let me add that LR is very stressful on mod batteries and as a matter of fact I ruined 3 sets testing LRs on the Buzz Pro. They weren't intended to be used on HV mods. I personally won't use them.
5/21/2011
Black/flames Trustfire 3.7 volt batteries
dual coil cartomizer
Metered 1.55Ohm
Buzz Pro set at 4.46 volts
11:00 AM start
10:30 PM stop
8:00 AM start (5/22/2011)
10:45 AM dead batteries
Total = 14Hr.15min.
5/22/2011
AW IMR 16340 550mah RED batteries
3.7 volt 880mah
dual coil cartomizer
Metered 1.6Ohm
Buzz Pro set at 4.40 volts
12:00PM Start
9:00 PM Stop
11:30 AM Start (5/23/2011)
2:45PM Batteries dead
Total time 12hr.15min.
Ultrafire batteries (silver)
3.7 volt 880mah
dual coil clear cartomizer
Metered 1.5Ohm
Buzz Pro set at 4 volts
2:00 PM Start
12:00 AM Stop
8:00AM Start (5/25/2011)
Batteries Dead 10:45 AM
Total = 12hrs. 45min.
5/25/2011
Ultrafire batteries (silver)
3.7 volt 880mah
dual coil clear cartomizer
Metered 1.6 Ohm
Buzz Pro set at 3.7 to 3.9 volts
start 1:00 PM
needs batteries 8:30 PM
total time 7hrs. 30 min.
5/26/2011
Black/flames Trustfire 3.7 volt batteries
dual coil cartomizer
Metered 1.50 Ohm
Buzz Pro set at 4.55 volts
1:30 PM start
10.00 PM stop
start 9:00 AM (5/27/2011
11:00 AM Batteries need recharged
Total 10hrs. 30 min.
You can find these and more in this thread. http://www.e-cigarette-forum.com/forum/notcigs/187979-buzz-pro-beta-test-results.html
5/21/2011
Black/flames Trustfire 3.7 volt batteries
dual coil cartomizer
Metered 1.55Ohm
Buzz Pro set at 4.46 volts
11:00 AM start
10:30 PM stop
8:00 AM start (5/22/2011)
10:45 AM dead batteries
Total = 14Hr.15min.
5/22/2011
AW IMR 16340 550mah RED batteries
3.7 volt 880mah
dual coil cartomizer
Metered 1.6Ohm
Buzz Pro set at 4.40 volts
12:00PM Start
9:00 PM Stop
11:30 AM Start (5/23/2011)
2:45PM Batteries dead
Total time 12hr.15min.
Ultrafire batteries (silver)
3.7 volt 880mah
dual coil clear cartomizer
Metered 1.5Ohm
Buzz Pro set at 4 volts
2:00 PM Start
12:00 AM Stop
8:00AM Start (5/25/2011)
Batteries Dead 10:45 AM
Total = 12hrs. 45min.
5/25/2011
Ultrafire batteries (silver)
3.7 volt 880mah
dual coil clear cartomizer
Metered 1.6 Ohm
Buzz Pro set at 3.7 to 3.9 volts
start 1:00 PM
needs batteries 8:30 PM
total time 7hrs. 30 min.
5/26/2011
Black/flames Trustfire 3.7 volt batteries
dual coil cartomizer
Metered 1.50 Ohm
Buzz Pro set at 4.55 volts
1:30 PM start
10.00 PM stop
start 9:00 AM (5/27/2011
11:00 AM Batteries need recharged
Total 10hrs. 30 min.
You can find these and more in this thread. http://www.e-cigarette-forum.com/forum/notcigs/187979-buzz-pro-beta-test-results.html
Last edited:
I took the IPro up past 4.7 with the DC. Right at 4.8 it cut out. I bumped it down a hair and fired right back up.
5C you might have had bad luck with the batts. Other than a week with the I06, I've been using LR 306's for 2 1/2 months without noticeably batt depreciation. Doesn't mean they won't die tomorrow, but there good to go so far.
5C you might have had bad luck with the batts. Other than a week with the I06, I've been using LR 306's for 2 1/2 months without noticeably batt depreciation. Doesn't mean they won't die tomorrow, but there good to go so far.
We're always glad to help. Besides, you have products awaiting eager hands to build.
We're always glad to help. Besides, you have products awaiting eager hands to build.
And these eager hands are eager to vape!
- Status
