Innokin Cool fire 1?

[Nuchuga]

So whats the deal with the cool fire? i was out and about shopping online and came across it/a kit that includes the device, tank, battery, and charger. I have yet to do extensive research but what exactly is it? for the longest time i have been looking for a mod that is basically a cheap and smaller sized silver bullet. While i know it is nowhere actually "comparable", it seems to be something similar to a nice version of a Bolt from madvapes! I have always loved the simplicity of 1 button non locking mods and that is why i am intrigued! Has anyone used it? How did it vape?

 

[WarHawk-AVG]

Innokin Cool Fire I

Nice! Looks like fixed wattage though...

Description

	The Innokin Cool Fire is a 18350 microprocessor-controlled personal vaporizer with a constant output of 8.5W. This kit comes with one Innokin iClear 30B Bottom Coil tank with a 3ml capacity.

Uses single 18350 battery - maximum current output is more than 5000mA.
Regulated output power of 8.5W, which is perfectly suitable for 2.1 ohm iClear dual coil clearomizers.
Reverse Battery Protection Circuit.
Built in 7A fuse for protection and stability.
Short Circuit Protection.
ON/OFF battery switch.
LED Battery Power Display.
Low Voltage Warning.
Overtime Vaping Warning (10 second switch cutoff).
Battery safety protection (Vent holes).
High compatibility 510 connector: Will fit iClear10, iClear16, and iClear30 clearomizers, as well as standard 510 Accessories
Dimensions: 3-1/4"L x 15/16"D

 

[Ed_C]

There has been some talk about it here. It's basically a regulated device that outputs a constant 8.5W. It's not really like the Silver Bullet which is more of a semi-mechanical mod.
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/502854-cool-fire-1-a.html

 

[BernieVideo]

Seems to me a constant set voltage would limit one as to what kinds of toppers one could use on it.

 

[Ed_C]

The voltage isn't set. The voltage will change depending on the resistance of your topper. It's the wattage that's constant. But yes it's not as flexible as a VV or VV/VW APV.

 

[spaceman84]

Looks like the price point and form factor are the selling points. It seems like innokin has noticed the appeal of the fat metal tube market (mech mods) but dumbed it down for the mainstream consumer. Arguably it would provide a more consistent vape since you don't have to worry about voltage drop but sub-ohm coils are out of the question.

 

[muzichead]

So whats the deal with the cool fire? i was out and about shopping online and came across it/a kit that includes the device, tank, battery, and charger. I have yet to do extensive research but what exactly is it? for the longest time i have been looking for a mod that is basically a cheap and smaller sized silver bullet. While i know it is nowhere actually "comparable", it seems to be something similar to a nice version of a Bolt from madvapes! I have always loved the simplicity of 1 button non locking mods and that is why i am intrigued! Has anyone used it? How did it vape?

Look no further.... Your Online Electronic Cigarette Store

 

[Ryuukon]

I'd like to know what tanks will and will not fit on it. Like if the iClear 16B will fit or not, which I'm betting on a big fat NOPE. The 16B is bigger than the 16. For comparison, I can put a 16 on my MVP with the beauty ring on, but not a 16B. Have to take the ring off for that.

 

[Eranda13]

Yes the 30b fits on the Coolfire I. I believe that's the tank it's sold with.

 

[TinaBaleena]

I have had the Cool Fire 1 for about 2 months. There is good and bad!

The good is that the flavor of all my juices are amazing - and warm - which I love.

The bad is that I go through single coil cartos like crazy - it eats them for lunch. EVODS - NO Way!! burnt burnt burnt!!

I believe that innokin really made this to be used with the Iclear 30B - Dual Coil. So It is really too high powered for any retail single coil!

What I really wanted was a VV VW 18350 device to upgrade from my Vision Spinner. The B&M I shop at convinced me that anything would work on this device and the voltage would auto adjust. In Theory, I believe he was correct but in practice, not so much.

Any advice on a really well built VV VW device that is not a Provari (too much for me right now). I would love something that i could dial back to 7.5 - 8 Watts and have my juice and cartos last a little longer.

 

[tnt56]

I have had the Cool Fire 1 for about 2 months. There is good and bad!

The good is that the flavor of all my juices are amazing - and warm - which I love.

The bad is that I go through single coil cartos like crazy - it eats them for lunch. EVODS - NO Way!! burnt burnt burnt!!

I believe that innokin really made this to be used with the Iclear 30B - Dual Coil. So It is really too high powered for any retail single coil!

What I really wanted was a VV VW 18350 device to upgrade from my Vision Spinner. The B&M I shop at convinced me that anything would work on this device and the voltage would auto adjust. In Theory, I believe he was correct but in practice, not so much.

Any advice on a really well built VV VW device that is not a Provari (too much for me right now). I would love something that i could dial back to 7.5 - 8 Watts and have my juice and cartos last a little longer.

Check out the VTR. I've used one and really like it.

 

[Retro68]

I have had the Cool Fire 1 for about 2 months. There is good and bad!

The good is that the flavor of all my juices are amazing - and warm - which I love.

The bad is that I go through single coil cartos like crazy - it eats them for lunch. EVODS - NO Way!! burnt burnt burnt!!

I believe that innokin really made this to be used with the Iclear 30B - Dual Coil. So It is really too high powered for any retail single coil!

What I really wanted was a VV VW 18350 device to upgrade from my Vision Spinner. The B&M I shop at convinced me that anything would work on this device and the voltage would auto adjust. In Theory, I believe he was correct but in practice, not so much.

Any advice on a really well built VV VW device that is not a Provari (too much for me right now). I would love something that i could dial back to 7.5 - 8 Watts and have my juice and cartos last a little longer.

The vtr is a good vv/vw mod, but it is limited to 19mm 510 tanks natively. It does come with an extender, but there will be a voltage drop using it. No idea how little or how much that would be. One option as well would be the coolfire 2 mod which is vw only - 7w-12.5w and takes an 18350. Looks a bit like a grenade so I dont know if that would interest you...

 

[Brian Catalino]

I'm really enjoying the Cool Fire II right now. 18350 grenade looking VW device that's built solid. Adjusts from 7-12.5 watts. 30bs and aero tanks fit and work perfect on em. I have a vamo v5 that I really like but was looking for something a little smaller and more durable to carry around at work.

 

[Emtbreid]

I have had the Cool Fire 1 for about 2 months. There is good and bad!

The good is that the flavor of all my juices are amazing - and warm - which I love.

The bad is that I go through single coil cartos like crazy - it eats them for lunch. EVODS - NO Way!! burnt burnt burnt!!

I believe that innokin really made this to be used with the Iclear 30B - Dual Coil. So It is really too high powered for any retail single coil!

What I really wanted was a VV VW 18350 device to upgrade from my Vision Spinner. The B&M I shop at convinced me that anything would work on this device and the voltage would auto adjust. In Theory, I believe he was correct but in practice, not so much.

Any advice on a really well built VV VW device that is not a Provari (too much for me right now). I would love something that i could dial back to 7.5 - 8 Watts and have my juice and cartos last a little longer.

Don't know if you've found anything yet, but for the past 2 weeks or so, I've been using the itaste SVD. VV/VW, a bit bigger, but will accept an 18650 cell for all day vaping. Pretty good results w/ a Protank 2.

 

[jjones6627]

The Smoktek SID is a relatively inexpensive jump from the Spinner and will work with 18650 and (with an optional tube) the 18350. Can't beat the advantage of VV / VW. My Vamo V5 has really opened my eyes!