RDA on a cool fire 1 to vape clouds

[removebeforeflight]

So, this is my first post to the forum and I just recently got my first full mechanical mod with patriot rda and have put my cool fire 1 regulated mod aside. I'm wondering if I can build a decent coil to vape clouds for the cool fire. When fully charged I believe the cool fire pushes out 4.2V and diminishes as it drains. I can't seem to find the "minimum resistance " rating for the Innokin cool fire 1. (genuine Innokin product, not clone.) I would really like to continue to use the cool fire. Has anyone out there built rda's for a cool fire 1? If so what ohm were you at and satisfied with? What gauge wire etc. Any help would be very appreciated. Thanks.

 

[Zamazam]

Build a 1.5 Ohm 24 Gauge microcoil build around a 5/64 Drillbit . The Coolfire 1 wasn't really designed for the power needed to power RDA's. It's primary design is for standard Ohm (2.2 and up) types of clearomizers/cartomizers/tanks, et cetera.

 

[removebeforeflight]

Build a 1.5 Ohm 24 Gauge microcoil build around a 5/64 Drillbit . The Coolfire 1 wasn't really designed for the power needed to power RDA's. It's primary design is for standard Ohm (2.2 and up) types of clearomizers/cartomizers/tanks, et cetera.

Thanks for the advice, I'll give that a try. I'm still pretty new to more advanced vaping. I have been searching a site that will be reliable for all things I may need. Kind of a advanced vapers one stop shop (rda's [lower and higher end units], assorted wire sizes, coil building tools of all sorts, gourmet juices, customizing caps and tips for rda's and such) . Any suggestions? Thanks in advance Zambian and other fellow vapers.

 

[Zamazam]

Thanks for the advice, I'll give that a try. I'm still pretty new to more advanced vaping. I have been searching a site that will be reliable for all things I may need. Kind of a advanced vapers one stop shop (rda's [lower and higher end units], assorted wire sizes, coil building tools of all sorts, gourmet juices, customizing caps and tips for rda's and such) . Any suggestions? Thanks in advance Zambian and other fellow vapers.

101Vape.com and eciggity.com come to mind. eciggity has a product called "biowick", I've been using that stuff for a while.

 

[removebeforeflight]

Thanks. Lol, I just realized autocorrect changed your username to Zambian. Sorry about that.

Anyone else that has any other suggestions or info on the rda cool fire build please release anything you've got so I can sponge it up.

 

[TheJohnG]

You'll find out soon enough that its nice to have a tank around. The coolfire at 8.5 watts will never be much of a dripper mod, a single coil at 1.5 to 2 ohms will work but really only gives a tank size vape. Find a tank you like.

JG - Trying to be simple again.

 

[djsvapour]

The coolfire 1 vapes at 8.5 watts. Unless somebody knows differently, it doesn't matter what you put on it.... it's still going to vape at 8.5 watts.

For clouds, use your mechanical.

 

[removebeforeflight]

Thanks to all for your replies. I'm hoping to completely kick the analogs by next week. Wish me luck.

 

[JeremyR]

The Innokin Cool Fire 1 A Mechanical Mod With A Difference

I clear30b is what it seems it was designed for..

 

[BeRight]

8 watt Vaping: Here is a combination that you may or may not want to give a try that works great for me.

1.5 ohm micro coil ala Rip Trippers (youtube) - 11 wraps/28 gauge kanthal - 5/64 drill bit/ peaches and cream cotton yarn wicking.
I also use a 30%PG/70%VG diluted with distilled water to be 50/50 viscosity.

This provides me with very nice flavor and vaper density using my: IGO-L RDA, pro tanks, or Evods.

 

[JeremyR]

Sounds like that would heat really slow how long are your pulls? Is that on a mech?

IN my experience 32g wire @ 2-2.5ohms will heat fastest and hotter for you at 8watts. Thinner wire heats easier and faster.

(Ripoff tripper)

 

[removebeforeflight]

8 watt Vaping: Here is a combination that you may or may not want to give a try that works great for me.

1.5 ohm micro coil ala Rip Trippers (youtube) - 11 wraps/28 gauge kanthal - 5/64 drill bit/ peaches and cream cotton yarn wicking.
I also use a 30%PG/70%VG diluted with distilled water to be 50/50 viscosity.

This provides me with very nice flavor and vaper density using my: IGO-L RDA, pro tanks, or Evods.

Thanks, that's just the type of reply I was hoping for; details. Much appreciated.