Innokin iclear 30s

[mrdfield]

Hello What do you guys think is the best voltage setting for the iclear 30s
Thanks much


Sent from my iPhone using Tapatalk

 

[BigCatDaddy]

It depends what ohms coil you have in it. We can go from there.

 

[Baditude]

If you are using the 2.0 ohm coils, around 4 volts should be a good starting point.

If you are using the 1.5 ohm coils, around 3.5 volts should be a good starting point.

A simple rule of thumb is to take the ohm rating, add the number "2", and the sum will be the voltage to use.

2 ohm + 2 = 4 volts.

1.5 ohm + 2 = 3.5 volts.