Innokin Sensis Find-F 40w

[Frenkyou]

innokin Sensis Find-F 40w

Innokin with its fourth generation "Find F" vape technology hidden inside its chipset, presents a technological update that would extend the life of the coil and increase the flavor by searching for the right frequency (Hertz) during the vaping for an experience unrivaled.
Enjoy the reading.

Packaging:
The package consists of an outer sleeve and a 100% recyclable box underneath containing the product. The outer sleeve shows the photo of the device and the warnings on the front. On the back there are additional warnings, the packing list, the scratch & check, the Qr-Code and the address of Shenzhen Innokin Technology Co., Ltd.
On the sides are show the word Find-F, the name of the product (Sensis) and finally some of the main features are listed.

Package contents:
1x Innokin Sensis Mod 3.000mAh
1x 3.1ml 100% Pyrex glass cartridge
1x Magnetic 510 Tank Adapter
1x S-Coil 0.25Ω Range 25-35W RDL (pre-installed)
1x Scepter Coil 0.65Ω Range 9-12W MTL
1x Spare MTL Drip-Tip
1x Spare O-ring
1x Base / Coil adapter
1x Type-C charging cable
1x User Manual
1x Warranty certificate

Innokin Sensis Pod Kit Specifications:
• Body material: Zinc alloy
• Device dimensions: 120.35x39.51x30.0mm
• Device weight: 160g
• Pyrex tank capacity: 3.1ml
• AFC: Adjustable MTL / RDL
• Refil: lower with silicone plug
• Coil Compatibility: Scepter
• Battery: Integrated 3.7V ， 3000 mAh / 11.1 Wh
• Power range: 6-40W
• Voltage range: 1-7.5V
• F (Ø) Mode
• Coil + Mode
• Refresh Mode
• Adjustable Cut-Off: 5-180s
• Max output current: 20A
• Resistance range: 0.2Ω-3.5Ω
• Charging current: 5V-1.7A.
• Charge indicator: ＜ 20% - Red; 20% -50% - Yellow; ＞ 50% - Green
• 100% recyclable packaging

Available colors:
Carbon, Jet Black, Desert Brown, Ultra Pink, Navy Blue.

First impressions:
Innokin certainly deserves a plus for being the first vape company to use eco-sustainable and 100% recyclable packaging, also the sachets that contain the coils and the spare part's are biodegradable.

In addition to the classic content, inside the package I found a very useful 510 magnetic adapter that allows you to install your favorite tank in view of a max 40W use, therefore always in the context of an MTL / RDL Vape ... This is a very smart choice for a long use before recharging thanks to the presence of an internal "big battery" with a capacity of 3,000mAh!

The form factor of the Sensis Find-F follows the one currently very in vogue of many Aio devices massively present on the market. However there are some Plus such as the 100% pyrex Tank with replaceable 510 Drip-Tip, the adjustable AFC, the very comfortable Fire button with integrated display, the Type-C charging port and finally a very good general level of finishes with a high degree of handling of the device.

Side view:
I received the Navy Blue version for this review and it is definitely my favorite along with the Jet Black version, yes I know I'm lucky!
On one side of the device there is the inscription "Innokin" while on the opposite side "Sensis" appears. An "Aegis" style metal frame completely embraces the leatherette insert and is screwed to the Mod via 6 Torx screws. The blue frame (like leather) elegantly fades downwards to black. At the top there are two opposing slots that each contain a small semi-hidden hole, these holes are used to suck the air towards the coil and are part of the AFC system with regulation which is positioned on the back of the Mod.

Front and back:
The front is particular, with a single and convenient large button that incorporates the display and the Up / down adjustment buttons, the Usb-C socket is positioned in the lower part of the Mod and allows recharging in an upright position.

At the top of the display are the mode and the battery level indicator with the wattage in larger characters, in the center and depending on the mode you are using there is a wave-shaped graph. At the bottom of the display are the duration of the last Puff, the coil resistance, the Puff counter.
In F (Ø) mode, the set frequency is shown.

On the back of the mod at the top and in the central position there is the AFC control system controlled by a metal knob, the system acts directly on this slot and on the two side holes. On the leather cover we find a hot stamped "F" bordered by artisan-style stitching

Over and under:
The compartment / pod is made with the metal ring system already seen on other devices, this system allows you to magnetically attract the cartridge and provide a solid base for the connected AFC system. The metal ring is fixed to the mod by 3 torx screws and can be disassembled for periodic cleaning operations.
On the bottom of the compartment / pod there are floating contacts for electrical transfer, there is no automatic puff system.

In the second image we can see the 510 adapter installed, I really like this option which I think is very useful, congratulations Innokin!

On the bottom of the Mod there are logos and legal marks, the characteristics of the generous internal battery are also indicated.
This part forms a solid footing for this unit.

 

[Frenkyou]

Pyrex Pod Tank:
Interesting that Innokin has introduced glass instead of the usual plastic material! Transparency is optimal and the taste of the liquid should also benefit from it, enjoying a good glass of wine is always better to do it in a glass glass rather than in a plastic glass!
Two different Drip-Tips are included in the kit, one for RDL vaping (black) and one for MTL vaping (clear) both are equipped with double o-rings and when they are inserted they are very stable.

The pod contains up to 3.1 ml of e-liquid, the refill is of the "bottom" type protected by a rubber cap, the coils are inserted into the Pod simply by pressure, I did not detect any significant leaks, only a few small trace of condensation on the ring, however easily removable and not annoying.

Scepter Coil:
Innokin for this Pod system uses the "Scepter" coil line these coils are quite small compared to the "Z" series that equip the Zlide and Zenith tanks. Before inserting these Coils it is necessary to screw them to a threaded base that has the task of transferring the electrical contact between the Mod and the coil, this base has 4 small holes for the air flow as well as the gold-plated contact for better electrical conductivity .
* In the package there is a spare coil / adapter.

In the kit there are a 0.25Ω KAL Mesh + cotton with seaweed fibers, 25-35W Range for RDL (pre-installed) and a 0.65Ω KAL Coil with 9-12W Range for MTL.
The separately purchased Scepter-coil options include a 0.5Ω KAL Mesh version with 18-20W Range for MTL / RDL and a 1.2Ω NI-CR with 9-12W Range for MTL.

510 atomizers:
With the excellent 510 adapter you can install any atomizer with a maximum diameter of 25mm without protrusions.
Naturally seen and considered the limit of 40W the preferable atomizers are those for RDL or MTL, I also made several tests with small diameter atomizers such as the new Innokin T18E PRO (in Photo) with a good aesthetic result.
Diameters from 22 to 25mm like; nautilus, zenith, zlide and many others. It is also possible to install valuable RTA, as the reading of the coils is always precise, a symptom of a good connection without excessive dispersions between the 510 adapter and mod.

Operation Guide:
• Press the Fire button 3 times to turn on / off the device
• Press the Fire key and the "+" key at the same time to reset the number of Puffs
• Press the Fire key and the "-" key at the same time to lock / unlock the wattage
• Press the "+" key or the "-" key to adjust the power from 6 to 40W in steps of 0.5W at a time
• Press the "+" and "-" keys simultaneously to access the menu.

Menu navigation:
Inside the menu you will find various settings; Power, Coil +, Refresh, the lock symbol, Setting and Exit.
• The basic "Power" function includes the possibility of using the device in VW mode from 6 to 40W or VV from 1 to 7.5V.
• By entering "Setting" it is possible to intervene on various parameters; choice of the minimal graphic interface or PRO (pre-installed), adjust the Time-out of the display from 5 to 180s, adjust the Cut-off for the single puff from 3 to 18s, check the ID and the firmware version installed or restore the device to factory data.

F (Ø) Mode:
This new technology developed by Innokin uses alternating current to produce different waveforms regulated in frequency by the hertz (HZ) therefore a sort of gradual preheating that extends the life of the Coil and maintains the vaporization temperature of the liquid on optimized values, also using function F (Ø) automatically activates the Coil + function.

To activate function F (Ø), position the cursor over the padlock symbol and press the fire button. The code for activation is a sequence of keys Up (+), Down (-) and Fire (P) the sequence is as follows: ++-+-+P
Once the code has been entered, the device downloads the function F (Ø), once the upload is complete you can set the frequency in a range between 20 and 500HZ.
By confirming with the Fire button, the selected HZs will be visible at the bottom right of the display.

Coil + Mode:
Maintains 40% power for 0.4 seconds at the end of the Puff, primarily to allow the cotton to saturate and to produce a "vibration" combined with the choice of Hertz (F Ø) that would allow the coil to shake off the caramelized liquid and the its residues.

Refresh Mode:
You can perform this function automatically or manually at any time. Selecting "run 1 x auto" and clicking on the Fire button, the coil refresh will last 4 seconds. If, on the other hand, you believe that the coil needs a longer refresh, select "extended old" and hold down the fire button, the refresh will last 8 seconds.
In both cases the aim is to produce a vibration capable of removing dirt from the old coils to revive them.

Considerations:
I liked Sensis Find-F Aio a lot, even if it does not have an original design it still manages to stand out for good levels of finishes, captivating color combinations and great handling.
I really like the Fire button with an integrated display that's super convenient to activate. The leather upholstery is soft and pleasant to the touch. The Pyrex pod with replaceable Drip-tip is a technical merit as the adoption of reclable and biodegradable materials for the packaging, finally the 510 adapter is the icing on the cake.

The chipset offers many adjustments of the basic functions and has a good management of the generous 3,000mAh battery, in fact I managed to do 416 puffs at 25W with the 0.25Ω coil! Full charging takes about 110 minutes.

What amazed me most is the Find (Ø) setting, which has reached the fourth generation of development. I realized that by adjusting the Hertz (without changing the wattage) you really feel a difference in output, you can clearly perceive a frequency that varies in an evident way (surprised). For example, with the 0.65Ω coil by setting 40 Hertz the suction noise is dull with a lot of "vibration" and the vapor appears decidedly "greasy" while by setting 192 Hertz the Puff is drier, fluid and linear, at 500 Hertz the Puff assumes completely characteristics different, the rustle and any vibration disappears and the vapor becomes even drier, cutting even the sweet notes of this liquid.

Undoubtedly Innokin has found the way to develop an AC system with adjustable frequency capable of actually modifying the wave and it is extremely interesting that the user can make changes in an attempt to change the aromatic perceptions in the way that suits him best.
Personally I do not use the coil plus function individually (as I have seen some reviewers do) but I always use it combined with the Find (Ø) function by modifying the hertz according to the resistance and the liquid used and I can guarantee you that the differences are many respect a traditional device. Congratulations Innokin.

I have not yet been able to understand if the "refresh" system has positive effects on old and tired coils, because I have not yet managed to bring one to the end of its life. What I can say is that by activating the Refresh function both automatically and manually you can clearly feel a strange type of activation / vibration that could really have positive effects, I will certainly deepen the subject when the time comes.

Vaping test:

• S-Coil 0.25Ω Range 25-35W RDL (pre-installed):
This resistance develops a remarkable RDL potential, I used it at 25W with peaks of 30W consuming at least 50ml of strawberries and raspberries with AFC all open and drip-tip (black) for RDL.
This Coil seems really inexhaustible and at the moment it does not require the "refresh" function because its yield is still optimal, it impressed me both aromatically and as the amount of steam emitted, normally set at 192 Hertz.

• Scepter Coil 0.65Ω Range 9-12W MTL (present in the kit):
With one of my favorite creamy liquids I push this coil to 12W, in this case I adjust the AFC almost completely closed, quite choked and I use the drip-Tip MTL with 75 Hertz. With this setting I find the right balance between vapor body and aromatic yield

• Scepter Coil 1.2Ω NI-CR with Range 9-12W for MTL (optional):
This MTL option could be very interesting but unfortunately I have not had the opportunity to try it because at the moment I do not have it.

• Scepter Coil 0.5Ω KAL Mesh with 18-20W Range for MTL / RDL (optional):
Innokin very kindly sent me a pack of 5 units for my test, I thank them.
For my way of vaping this is the perfect "All-Day" coil, I use it at 18W with a frequency of 120 Hertz with AFC open at 50%, good hit in the throat, decent aromatic yield, top-level production of steam. I will definitely buy them back together with 0.25Ω.

Conclusion:
Innokin's technology is real and works so if you want a product with a certain degree of innovation or simply a device suitable for MTL / RDL use even with your favorite tank.
Innokin Sensis Find-F 40w pleasantly surprised me and I recommend it.

Thanks to Innokin for sending me the product for free in exchange for my honest evaluation.
Sensis - Product | INNOKIN®